Install these lights into ceiling cutouts with housings for direct, overhead lighting. They’re often used in indoor spaces such as offices and lobbies, and as decorative lighting. UL or ETL listed for use in damp locations, these lights are sealed to withstand humidity and moisture. With a color rendering index (CRI) of 90, they make colors look natural and vibrant. The lights have an external switch to select warm, neutral, or cool light.

Housings and lights connect together with quick-disconnect terminals. The lights come with tension springs to hold them inside the housing. If you already have housings with a screw-in base, the lights also include an adapter for that connection.

Housings for unfinished ceilings mount between support beams. Expand the hanger bars to fit spaces up to 25 1/4" long. Slide the housing bars to adjust the light’s location. Housings for finished ceilings don’t require access to support beams. They’re held in place by clips. Lights with a baffle reflector minimize glare and soften the light. Lights with a smooth reflector also reduce glare but appear brighter than those with a baffle reflector.

IC-rated lights and housings safely dissipate heat, so you can mount them directly against insulation.

Also known as troffers, these lights fit flush into most drop-ceiling grids. They’re fully sealed with an airtight gasket, so they’re rated IP65 for protection against low-pressure washdowns, humidity, and dust. Install them anywhere that requires frequent cleaning, even an ISO Class 5 clean room. They also meet NSF/ANSI 2, so you can use them in food processing areas with splashing liquid. These lights won’t shatter and contaminate your area—they’re rated IK10, the highest rating for impact protection. And since they’re IC rated, you won’t risk a fire if you install them in direct contact with insulation.

Casting a neutral light dispersed by a frosted lens, these lights won’t cause glare on equipment. The lens is made of acrylic to resist scratching and yellowing.