Filter by
For Use On
Container Size
Type
Consistency
Formulation
Performance
Thickness
Minimum Temperature
Maximum Temperature
Material
Container Net Weight
Export Control Classification Number (ECCN)
REACH
DFARS Specialty Metals
RoHS
Approximate Coverage @ Thickness
Fuel-Resistant Surface Fillers
 |
Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.
1.5 pt. Container—1.5-pint container can treat a 10-gallon fuel tank.
3 pt. Container—3-pint container can treat a 20-gallon fuel tank.
Container | Temp. Range, ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, pt. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||
Epoxy Surface Fillers | ||||||||||||||||
| 1.5 | Can | 5 | 24 | Thick Liquid | Yes | 2:1 | No | 70 | 90 | Amber | Drill, Sand, Tap | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass | 2450N12 | 000000 | ||
| 3 | Can | 5 | 24 | Thick Liquid | Yes | 2:1 | No | 70 | 90 | Amber | Drill, Sand, Tap | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass | 2450N11 | 000000 | ||
Grout
 |
Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring. Apply with a grout float.
Acrylic Plastic—Acrylic plastic grout does not require mixing. It resists shrinking, cracking, and staining.
Container | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | For Max. Crack Wd. | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Application Temp. Range, ° F | Color | For Use On | Each | |||
Acrylic Plastic Surface Fillers | ||||||||||||||||
| 1 | Pail | 15 | 24 | Paste | No | 1/2" | 101 ft² @ 1/4" | 1/2" | No | 50 to 100 | Beige | Plaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Asphalt | 77105T12 | 000000 | ||
| 1 | Pail | 15 | 24 | Paste | No | 1/2" | 101 ft² @ 1/4" | 1/2" | No | 50 to 100 | Gray | Plaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Asphalt | 77105T11 | 00000 | ||
| 1 | Pail | 15 | 24 | Paste | No | 1/2" | 101 ft² @ 1/4" | 1/2" | No | 50 to 100 | White | Plaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Asphalt | 77105T13 | 00000 | ||
Epoxy Grout
 |
Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals, such as acids, alkalies, salt water, and common solvents and cleaners. Its lightweight formula makes this grout easy to spread. Use in horizontal or vertical joints—grout won’t sag or shrink. Apply with a grout float. It can be cleaned up with water when wet; it doesn’t require a sealer once it cures. The size listed is the combined total of the two parts.
Container | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Net Wt., lb. | Type | Begins to Harden, hr. | Reaches Full Strength, day | Consistency | Mixing Req. | Mix Ratio | For Max. Crack Wd. | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Application Temp. Range, ° F | Color | For Use On | Each | |||
Epoxy Surface Fillers | |||||||||||||||||
| 1.3 | Pail | 7 | 3 | Thick Liquid | Yes | 1:1 | 1/2" | 95 ft² @ 1/4" | 1/2" | Yes | 70 to 85 | Black | Plaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone | 77105T21 | 0000000 | ||
| 1.3 | Pail | 7 | 3 | Thick Liquid | Yes | 1:1 | 1/2" | 95 ft² @ 1/4" | 1/2" | Yes | 70 to 85 | Brown | Plaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone | 77105T22 | 000000 | ||
| 1.3 | Pail | 7 | 3 | Thick Liquid | Yes | 1:1 | 1/2" | 95 ft² @ 1/4" | 1/2" | Yes | 70 to 85 | White | Plaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone | 77105T23 | 000000 | ||
