Filter by
For Use On
Maximum Temperature
Container Size
Consistency
Minimum Temperature
Material
Cure Type
Clarity
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Contact Adhesives
 |  |  |
Can | Tube | Applicator-Top Can |
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Black—Black adhesive works especially well on foam insulation.
Cannot Be Sold To—Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden, min. | Reaches Full Strength | Shear Strength, psi | Cure Type | Consistency | Viscosity, cP | Temp. Range, ° F | Color | For Joining | Cannot Be Sold To | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3M | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1357 | 1 gal. | Can | 10 | 24 hr. | 158 | Room Temperature | Thin Liquid | 325 | -30 to 220 | Light Yellow | Ceramic, Glass, Masonry, Metal, Wood | Alexandria, VA; Arlington County, VA; Connecticut; Delaware; District of Columbia; Fairfax County, VA; Fairfax, VA; Falls Church, VA; Los Angeles County, CA; Loudoun County, VA; Maine; Manassas Park, VA; Manassas, VA; Maryland; Massachusetts; New Hampshire; New Jersey; New York; Orange County, CA; Pennsylvania; Prince William County, VA; Rhode Island; Riverside County, CA; San Bernardino County, CA; Stafford County, VA; Utah; Vermont | 75285A33 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2262 | 32 fl. oz. | Can | 10 | 24 hr. | Not Rated | Room Temperature | Thin Liquid | 525 | -10 to 230 | Clear | Metal, Plastic, Rubber | — | 75285A66 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Pliobond | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 20 | 1 fl. oz. | Tube | 3 | 14 day | 1,200 | Room Temperature | Thin Liquid | 800 | -40 to 370 | Beige | Ceramic, Glass, Metal, Plastic, Rubber | — | 7468A22 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 25 | 8 fl. oz. | Applicator-Top Can | 3 | 14 day | 1,200 | Room Temperature | Thin Liquid | 800 | -40 to 370 | Beige | Ceramic, Metal, Plastic, Rubber | — | 7468A62 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 25 | 16 fl. oz. | Can | 3 | 14 day | 1,200 | Room Temperature | Thin Liquid | 800 | -40 to 370 | Beige | Ceramic, Metal, Plastic, Rubber | — | 7468A63 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 25 | 32 fl. oz. | Can | 3 | 14 day | 1,200 | Room Temperature | Thin Liquid | 800 | -40 to 370 | Beige | Ceramic, Metal, Plastic, Rubber | — | 7468A8 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 25 | 1 gal. | Can | 3 | 14 day | 1,200 | Room Temperature | Thin Liquid | 800 | -40 to 370 | Beige | Ceramic, Metal, Plastic, Rubber | — | 7468A9 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Other Contact Adhesives | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| — | 16 fl. oz. | Applicator-Top Can | 3 | 36 hr. | Not Rated | Room Temperature | Thick Liquid | Not Rated | -40 to 250 | Black | Foam, Masonry, Metal, Plastic, Rubber | — | 4463K211 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Coolant-Resistant Surface Fillers
 |
Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.
Container | Temp. Range | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, min. | Consistency | Mixing Req. | Min. | Max., ° F | Color | Specs. Met | For Use On | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Surface Fillers | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 16 | Jug | 7 | 10 | Thick Liquid | No | Not Rated | 500 | Brown | ASTM D3147 | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, PTFE, Polyethylene, Polypropylene, Polyimide, Polystyrene, PVC, PVDF | 2445N11 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Surface Fillers
 |  |  |
Epoxy Mixer Cup | Epoxy Jar | Clay Tube |
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Aluminum Liquid and Aluminum Putty—Devcon Aluminum Liquid and Devcon Aluminum Putty form a nonrusting finish.
Metal Patch & Fill—Devcon Metal Patch & Fill repairs worn, rusted, and corroded surfaces with less preparation.
Container | Temp. Range, ° F | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Net Wt. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Pkg. Qty. | Pkg. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Fixmaster Epoxy | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EA 445 | — | 0.12 oz. | Mixer Cup | 5 | 12 | Thick Liquid | Yes | 1:1 | 1 in² @ 1/4" | 1/4" | Yes | -65 | 180 | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood | 10 | 7512A15 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EA 445 | — | 1 oz. | Mixer Cup | 5 | 12 | Thick Liquid | Yes | 1:1 | 1 in² @ 1/4" | 1/4" | Yes | -65 | 180 | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood | 10 | 7512A16 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EA 9131 | — | 0.12 oz. | Mixer Cup | 90 | 24 | Thick Liquid | Yes | 1.5:1 | 1 in² @ 1/4" | 1/4" | Yes | -65 | 180 | White | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood | 10 | 7512A14 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Devcon Aluminum Liquid | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10710 | — | 1 lb. | Jar | 75 | 16 | Thick Liquid | Yes | 9:1 | 70 in² @ 1/4" | 3/4" | Yes | -40 | 250 | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 1 | 74575A74 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10720 | — | 3 lb. | Jar | 75 | 16 | Thick Liquid | Yes | 9:1 | 210 in² @ 1/4" | 3/4" | Yes | -40 | 250 | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 1 | 74575A75 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Devcon Aluminum Putty | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10610 | — | 1 lb. | Jar | 60 | 16 | Putty | Yes | 9:1 | 70 in² @ 1/4" | 3/4" | Yes | -40 | 250 | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 1 | 74575A72 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10620 | — | 3 lb. | Jar | 60 | 16 | Putty | Yes | 9:1 | 210 in² @ 1/4" | 3/4" | Yes | -40 | 250 | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 1 | 74575A73 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Devcon Metal Patch & Fill | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| S-50 | 3 | — | Tube | 20 | 6 | Paste | No | — | 6 in² @ 1/4" | 1/4" | Yes | 40 | 400 | Gray | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic, Glass | 1 | 74575A98 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Roof Patching Compounds
 |  |
Asphalt Pail | Can |
Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.
Asphalt—Apply asphalt compounds to wet or dry surfaces.
Acrylic Plastic—Apply acrylic plastic compounds to dry surfaces.
Container | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Begins to Harden | Reaches Full Strength | Consistency | Mixing Req. | Contains Aggregate | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Application Temp. Range, ° F | Color | Specs. Met | For Use On | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Asphalt Surface Fillers | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1 | Can | 60 min. | 30 day | Thick Liquid | No | No | 12 ft² @ 1/8" | 1/2" | Yes | 50 to 120 | Black | ASTM D4586 | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 7746T3 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4.7 | Pail | 60 min. | 30 day | Thick Liquid | No | No | 56 ft² @ 1/8" | 1/2" | Yes | 50 to 120 | Black | ASTM D4586 | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 7746T4 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Acrylic Plastic Surface Fillers | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1 | Can | 4 hr. | 24 hr. | Thick Liquid | No | Yes | 12 ft² @ 1/8" | 1/4" | Yes | 50 to 90 | White | — | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 76405T16 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ceramic Adhesives
 |
Often used for bonding and repair on exhaust systems, diesel engines, and gas turbines, these adhesives withstand high temperatures and provide excellent electrical insulation.
Thick Liquid—Thick liquids flow into small spaces and are easy to spread.
Paste—Pastes will not drip or sag while hardening on a vertical surface.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Thermal Conductivity, W/(m⋅°C) | Consistency | Viscosity, cP | Max. Temp., ° F | Color | For Joining | Each | ||
| 8 | Pail | 20 | 48 | 0.865 | Thick Liquid | 90,000 | 2,300 | Gray | Ceramic, Metal | 7482A11 | 000000 | |
| 8 | Pail | 20 | 48 | 0.865 | Paste | 130,000 | 2,300 | Gray | Ceramic, Metal | 7482A21 | 00000 | |
| 8 | Pail | 20 | 48 | 0.865 | Paste | 190,000 | 2,300 | Gray | Ceramic, Metal | 7482A31 | 00000 | |
| 64 | Pail | 20 | 48 | 0.865 | Paste | 130,000 | 2,300 | Gray | Ceramic, Metal | 7482A22 | 000000 | |
| 64 | Pail | 20 | 48 | 0.865 | Paste | 190,000 | 2,300 | Gray | Ceramic, Metal | 7482A32 | 000000 | |
Heavy Duty Roof Patching Compounds
|  |
Cans | Cartridges |
These patching compounds are the most flexible and watertight we offer. Developed for use on flashing, chimneys, and high-stress areas, they are highly vibration resistant.
Cartridges—Dispense compounds in a cartridge in a standard caulk gun (sold separately).
Cannot Be Sold To—Compounds that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container Size | Consistency | Begins to Harden, hr. | Reaches Full Strength | Approx. Coverage @ Thk. | Max. Thk. | Application Temp. Range, ° F | Color | For Use Outdoors | For Use On | Cannot Be Sold To | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cans | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1 gal. | Paste | 2 | 7 day | 8 ft² @ 1/4" | 1/8" | 20 to 100 | Black | Yes | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 7568T53 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cartridges | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10.1 fl. oz. | Gel | 12 | 24 hr. | 1/2 ft² @ 1/4" | 1/2" | 40 to 120 | Black | Yes | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | — | 7568T51 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Temperature Gasket Sealants
 |  |
Cartridge | Tube |
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Max. Temp., ° F | Color | For Use On | Each | |||
| 2.3 | Tube | 60 | 3 | 2,000 | Black | Aluminum, Brass, Bronze, Cast Iron, Copper, Fiberglass, Masonry, Stainless Steel, Steel, Titanium | 7573A63 | 000000 | ||
| 10.3 | Cartridge | 60 | 3 | 2,000 | Black | Aluminum, Brass, Bronze, Cast Iron, Copper, Fiberglass, Masonry, Stainless Steel, Steel, Titanium | 7573A65 | 00000 | ||
High-Temperature Surface Fillers for Metal
 |
Epoxy Stick |
Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F. Fillers that have a mix ratio are multi-part fillers. The size listed is the combined total of the parts.
Stick—Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.
Container | Temp. Range, ° F | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Net Wt., oz. | Type | Lg. | Begins to Harden | Reaches Full Strength, hr. | Heating Req. to Reach Full Strength | Consistency | Mixing Req. | Approx. Coverage @ Thk. | Max. Thk. | Dia. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Epoxy Surface Fillers | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| — | 4 | Stick | 8" | 90 min. | 72 | — | Putty | Yes | 16 in² @ 1/4" | 1/2" | 1" | Yes | -40 | 450 | Gold | Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 7803A21 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ceramic Surface Fillers | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 8 | — | Can | — | 5 hr. | 6 | 2 Hrs. Air Dry Then 4 Hrs. @ 200°F | Putty | No | 32 in² @ 1/4" | 3/8" | — | No | Not Rated | 2,000 | Dark Gray | Sand | Steel, Stainless Steel, Cast Iron | 7356A33 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 16 | — | Bottle | — | 5 hr. | 6 | 2 Hrs. Air Dry Then 4 Hrs. @ 200°F | Putty | No | 65 in² @ 1/4" | 3/8" | — | No | Not Rated | 2,000 | Dark Gray | Sand | Steel, Stainless Steel, Cast Iron | 7356A35 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Temperature Contact Adhesives
|
These adhesives resist temperatures up to 500° F, as well as chemicals, fuels, grease, and water. Apply them to both surfaces, air dry, and then bring together to bond. Heat to 300° F to reach full strength.
Cannot Be Sold To—These adhesives cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden, min. | Reaches Full Strength, min. | Heating Req. to Reach Full Strength | Shear Strength, psi | Cure Type | Consistency | Viscosity, cP | Temp. Range, ° F | Color | For Joining | Cannot Be Sold To | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Pliobond | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| HT-30 | 32 fl. oz. | Can | 3 | 30 | 30 Min. @ 300°F | 1,450 | Heat, Room Temperature | Thick Liquid | 6,500 | -40 to 500 | Beige | Ceramic, Metal | Alexandria, VA; Arlington County, VA; Connecticut; Delaware; District of Columbia; Fairfax County, VA; Fairfax, VA; Falls Church, VA; Los Angeles County, CA; Loudoun County, VA; Maine; Manassas Park, VA; Manassas, VA; Maryland; Massachusetts; New Jersey; New York; Orange County, CA; Pennsylvania; Prince William County, VA; Rhode Island; Riverside County, CA; San Bernardino County, CA; Stafford County, VA; Utah; Vermont | 7468A3 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| HT-30 | 1 gal. | Can | 3 | 30 | 30 Min. @ 300°F | 1,450 | Heat, Room Temperature | Thick Liquid | 6,500 | -40 to 500 | Beige | Ceramic, Metal | Alexandria, VA; Arlington County, VA; Connecticut; Delaware; District of Columbia; Fairfax County, VA; Fairfax, VA; Falls Church, VA; Los Angeles County, CA; Loudoun County, VA; Maine; Manassas Park, VA; Manassas, VA; Maryland; Massachusetts; New Jersey; New York; Orange County, CA; Pennsylvania; Prince William County, VA; Rhode Island; Riverside County, CA; San Bernardino County, CA; Stafford County, VA; Utah; Vermont | 7468A4 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fuel-Resistant Surface Fillers
 |
Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.
1.5 pt. Container—1.5-pint container can treat a 10-gallon fuel tank.
3 pt. Container—3-pint container can treat a 20-gallon fuel tank.
Container | Temp. Range, ° F | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, pt. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Epoxy Surface Fillers | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1.5 | Can | 5 | 24 | Thick Liquid | Yes | 2:1 | No | 70 | 90 | Amber | Drill, Sand, Tap | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass | 2450N12 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3 | Can | 5 | 24 | Thick Liquid | Yes | 2:1 | No | 70 | 90 | Amber | Drill, Sand, Tap | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass | 2450N11 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fine-Particle Abrasion-Resistant Surface Fillers for Metal
 |
Epoxy Jar |
For use in processing equipment that carries particles smaller than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings. The size listed is the combined total of the two parts.
%20--%3e%3cg%3e%3cg%20id='Layer_1'%3e%3cpath%20class='cls-1'%20d='M68,27.2c-14.6,0-26.4,11.7-26.4,26.3,0,7,2.8,13.7,7.7,18.7v44.8l18.8-16.1,18.7,16.1v-44.9c10.3-10.3,10.3-27,0-37.3-5-4.9-11.7-7.7-18.7-7.7h0ZM81.3,105l-13.2-11.4-13.2,11.4v-28.7c8.2,4.8,18.3,4.8,26.5,0v28.7ZM76.2,70.8c-5.2,2.5-11.2,2.5-16.4,0-9.5-4.5-13.5-15.9-9-25.4,4.5-9.5,15.9-13.5,25.4-9,9.5,4.5,13.5,15.9,9,25.4-1.9,4-5.1,7.1-9,9Z'/%3e%3cpath%20class='cls-2'%20d='M5.8,95.5c-1.2,0-2.1-1-2.1-2.1,0,0,0,0,0,0V29.4h20.9c2.1,0,3.8-1.7,3.8-3.8V3.7c.2,0,.4,0,.5,0h37.5c1.2,0,2.1,1,2.1,2.1v18.6c1.2,0,2.5.1,3.7.3V5.8C72.2,2.6,69.6,0,66.4,0H28.9c-1.5,0-3,.6-4.1,1.7h-.1c0,.1-23,23.2-23,23.2-1.1,1.1-1.7,2.6-1.7,4.1v64.3c0,3.2,2.6,5.8,5.8,5.8h41.7v-3.7H5.8ZM24.7,7.1v18.7H6L24.7,7.1Z'/%3e%3c/g%3e%3c/g%3e%3c/svg%3e)
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | Temp. Range, ° F | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Wt., lb. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Fixmaster Wear Resistant Putty | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PC 7222 | 1 | Jar | 30 | 24 | Putty | Yes | 2:1 | 50 in² @ 1/4" | 1" | Yes | -20 | 220 | Gray | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 7489A33 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Conductive Surface Fillers for Electronics
 |
Single-Use Packet |
A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components. They come as two parts. The size listed is the combined total of the two parts.
Thermal Conductivity—Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.
Electrical Volume Resistivity—Electrical volume resistivity measures how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Container | Temp. Range, ° F | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Net Wt., oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Thermal Conductivity, W/(m⋅°C) | Electrical Volume Resistivity | Mix Ratio | Max. Thk. | For Use Outdoors | Min. | Max. | Color | For Use On | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Surface Fillers | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.09 | Single-Use Packet | 90 | 24 | Paste | Yes | 6.05 | 0.009Ω⋅cm | 100:6 | 1/4" | Yes | -75 | 250 | Silver | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | 7661A11 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.35 | Single-Use Packet | 90 | 24 | Paste | Yes | 6.05 | 0.009Ω⋅cm | 100:6 | 1/4" | Yes | -75 | 250 | Silver | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | 7661A12 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Adhesive-Back Roof Repair Rolls
 |
Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls. Backing is rubberized asphalt adhesive. Roll can be cut to size.
Aluminum | White | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | Wd. | Thk. | Material | Backing Material | Mixing Req. | Application Temp. Range, ° F | For Use On | Each | Each | |||
| 33 1/2 | 4" | 3/64" | Aluminum | Asphalt | No | 55 to 100 | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 9640T1 | 000000 | 9640T4 | 000000 | |
| 33 1/2 | 6" | 3/64" | Aluminum | Asphalt | No | 55 to 100 | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 9640T2 | 00000 | 9640T5 | 00000 | |
| 33 1/2 | 36" | 3/64" | Aluminum | Asphalt | No | 55 to 100 | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 9640T3 | 000000 | 9640T6 | 000000 | |
