We will reply to your message within an hour.
Determine tool spindle position in relation to work surface, layout lines, holes, and slots. Also known as wiggler sets.
Center your work by mounting these into your drill chuck or collet and lining up the pointer with the mark on the shaft.
Locate edges, shoulders, center points, and lines on your workpiece with more precision than standard edge finders.
Locate edges, shoulders, counter points, and lines on your workpiece.
Align the level to find and mark the vertical center of curved surfaces.
Find the center of square and round materials, such as structural framing and pipe, and determine setup angles on milling machines and grinders.
Locate and mark the centerline on rods, tubes, and pipes, lay out keyways, and establish angles for connections.
Fit these through existing holes and mark the center of the hole in a second workpiece.
Punch has two viewing lenses. One has a circle and dot and one has a crosshair to enable you to pinpoint the location where you need to punch. Replace the lens with one of the two included punches and strike it with a hammer to mark the hole center.
Mark and transfer distances from the outer edge of an object.
Find the edge of a workpiece, align your setup, and inspect parts with one tool. Once installed in your milling machine spindle, these indicators can measure in three axes.
Replace the tip of your machine tool indicator.
Install these gauges onto the jaws of electronic, dial, and vernier calipers to measure the center-to-center distance between two holes.
Measure center-to-center distances with the pointed jaws on these calipers, which are designed to self-center in holes.
Identify threads per inch on external threads and find the center of your workpiece to line up thread cutting tools.
Find tube, pipe, fastener, wire, and drill bit sizes with one tool.
Replace your try square, miter square, depth gauge, height gauge, center-point finder, and level. The blade on these squares meets Fed. Spec. GGG-R-791H, which establishes uniform standards for accuracy, graduations, and size.
Attach to Starrett High-Accuracy Combination Square Blades with the included lockbolts.
A titanium coating protects the blade against scratches and wear.
Replace your try square, miter square, depth gauge, marking gauge, 90° level, ruler, and scriber with one tool.
Attach to High-Accuracy Combination Square Blades with the included lockbolts.
Blades are for use with High-Accuracy Combination Square Heads.
Use these squares in place of your try square, miter square, depth gauge, height gauge, center-point finder, and level.
Align your robot arm with work areas using these styli to make sure it will perform automated tasks accurately and won’t damage workpieces.
The built-in guide has a beveled tip that fits into countersunk holes in hardware, such as hinges and latches, to center the bit.
Insert directly into power screwdrivers, impact drivers, and other tools that accept a 1/4" hex shank.