Create consistent finishes on stainless steel, titanium, steel, iron, and nickel.

A coating prevents dust and debris from building up on the abrasive surface.

Holes allow dust removal when used with a vacuum sander.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

These discs have a long-lasting diamond abrasive.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

The thick, abrasive-embedded nylon mesh construction gives you maximum control over sanding pressure.

These discs are abrasive-embedded cloth with a cushioned layer.

The premium abrasive stays sharp longer.

The heavy duty construction provides more support than standard discs for heavy material removal.

The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.

The abrasive-embedded nylon mesh construction gives you more control over sanding pressure.

Thicker, more pliable, and less aggressive than standard nylon mesh quick-change discs, use these for finer sanding on curved surfaces.

The premium abrasive stays sharp longer.

These discs have a long-lasting diamond abrasive.

The heavy duty construction provides more support than standard discs for heavy material removal.

The premium abrasive stays sharp longer.

Holes in the disc let you see the surface you’re sanding.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

A coating prevents dust and debris from building up on the abrasive surface.

Fit these discs over your tool’s arbor to sand stainless steel and hard metals.

Used for stripping, these discs eliminate discoloration from heat buildup.

Fit these discs over your tool's arbor to sand aluminum, soft metals, and nonmetals.

Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.

These discs have a harder abrasive than standard flap sanding discs.

The backing plate on these discs can be sheared away as the abrasive flaps wear down, allowing you to use more of the disc rather than replacing with a new one.

The flaps alternate between an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.

These discs have a harder abrasive than standard flap sanding discs.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

Set at an angle and widely spaced, the flaps reach into corners.

With more flaps than standard discs, these last 30-40% longer.

Set at an angle and widely spaced, the flaps reach into corners.

Use these discs with commercial floor buffing machines to sand wood floors.

Lap without the mess of pastes and slurries—abrasive is embedded in the surface of this waterproof film.

Often used to polish optics such as mirrors and lenses.