Use this general purpose grease to lubricate most machinery.

Waterproof and heat-resistant, this grease can be autoclaved without washing out of equipment. It's chemically inert, so it won't interact with process fluids.

For use on metal parts to prevent corrosion and as an antiseize lubricant. Gauges are often coated in a thin layer of lanolin to move smoothly and maintain their precision.

For use in food-processing and preparation areas, this grease is rated for incidental contact with food.

Highly pure and with no additives to contaminate sensitive environments, use this grease in clean rooms and electronic assembly workstations.

Made with moisture-resistant thickeners, this grease resists washing off and reduces corrosion in wet environments while still lubricating under heavy loads.

Made with moisture-resistant aluminum thickener, this grease resists washing off and reduces corrosion in wet environments while still lubricating under heavy loads. It is NSF registered H1 for incidental food contact.

This thin lubricant penetrates into tight spaces, and nano-sized additives fill small surface imperfections, reducing wear and heat and extending the life of both the lubricant and equipment.

For use in food-processing and preparation areas, these thin, multipurpose lubricants are NSF registered H1 for incidental food contact.

Protect food-processing and preparation equipment while limiting environmental impact. These multipurpose lubricants are NSF registered H1 for incidental food contact and are rated to quickly break down in water.

For use in food-processing and preparation areas, use these lubricants to cut through dirt, grease, and rust, and to protect chain and other moving metal parts.

Thick to cling to wet surfaces, these corrosion-resistant lubricants won’t wash off of chain or other moving metal parts in wet environments. They withstand heavy loads, cut through dirt, grease, and rust, and protect metal surfaces.

By traveling along individual strands and penetrating to the core of wire rope and cable, these lubricants maximize coverage to prevent rust and reduce wear. They cut through dirt, grease, and rust to protect wire rope and cable.

Protect electrical components—these lubricants insulate and block moisture, preventing electrical malfunctions. They cut through dirt, grease, and rust to clean connections and relays, leaving behind a thin film for long-lasting protection.

Nano-sized additives fill small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. These lubricants dry to form a nonstick film that won’t attract dust. They are often used on hinges, gears, and roller chain.

Also known as antifriction coatings, these slippery coatings cure to provide permanent lubrication. They're made with moly for high-load applications, such as hinges, gears, and rods. They fill in surface imperfections for a smooth, dry finish that won’t attract dust.

Spray these wear-resistant lubricants on rollers, hinges, and tracks of overhead doors to reduce friction and noise. These silicone lubricants repels water for use outdoors. Once dry, they form a thin lubricating layer that won’t rub off or attract dust.

For use in worm gears, this oil stands up to high pressure. Use it in food-processing and preparation areas where incidental contact with food is possible.

Use this oil in food-processing and preparation areas.

Use at pressures up to 50,000 psi.

Made of graphite, these powders and flakes lubricate under heavy loads and high temperatures. They resist most chemicals and conduct heat and electricity. Use them dry or mix with oil and grease.

More effective than water-based degreasers, these solvent-based degreasers cut through the toughest grease and oils.

Also known as TSP, these heavy duty, powdered cleaners remove heavy soils, dirt, and grease from concrete and tile.

These solvent-based degreasers contain Vertrel™ to remove long-lasting lubricants, such as DuPont/Chemours Krytox, from parts and fittings.

Often used to clean lubricants off compressed gas equipment and fittings, these solvent-based degreasers have a contaminant concentration below 1 ppm to ensure no residue or particles are left behind that can hinder the operation of valves, sensors, and controls.

As chain, gears, and conveyors move, these brushes rotate to apply lubricant.

Use these brushes to lubricate chain, gears, and conveyors. Connect to an oil dispenser, then turn the dial to adjust flow.

Flip the lever to start and stop flow.