Hook into your roller chain and use the handle to tighten the jaw until the chain ends are close enough to add or remove a link. Choose from holders with maximum jaw capacity from 1 3/4” to 5”.

These guides align chain more precisely than open-channel guides.

Quickly connect and disconnect these carabiners—they don’t lock.

Hold rope more securely than nonlocking and slide-release carabiners. While these carabiners are not as secure as screw-locking carabiners, they are easier to open.

These snaps have an eye that rotates for easy positioning.

For a more secure connection than standard trigger-locking snaps, squeeze the trigger and slide the latch grip down to release.

Squeeze the trigger to quickly release the latch.

The force of the load helps keep the arms closed. Press the trigger for quick connection and disconnection.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens.

Garolite insulation prevents electrical current from passing to hoists and other lifting equipment, causing damage. Because they're electrical insulating, these hooks are often used to hold a workpiece while welding.

These have a removable half-link to attach large rings, links, and other closed fittings.

The opening on these hooks fits large anchor points and allows chain to slide through when the hook is closed. They have a spring latch to ensure rope, chain, and fittings won't detach from the hook when the load slackens.

For a more secure connection than standard hooks, these clevis hooks have a latch that locks closed when a load is applied.

These rotate for easy positioning before a load is applied.

Rotate these hooks for easy positioning before lifting your load. They have a latch that locks when a load is applied for a more secure connection than standard hooks.

These rotate for easy positioning before a load is applied.

Also known as foundry hooks, use these on thick molds, castings, and objects that don't have attachment points.

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the clevis end.

Slide the clevis pin into these hooks to attach chain, no extra fittings needed.

Often used in binding and tie-down applications, these securely hold a single link of chain.

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the eye end.

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the clevis end.

Attach chain to the eye end of these hooks.

Join, organize, and suspend objects with these S-hooks.

For extra security, these have a latch that snaps back into place to secure your load.

The spring-loaded latches on these hooks snap back into place, securing your load.

These hooks meet MS-87006.

The strongest shackles we offer, these connectors have a pin with flush ends that prevents snagging and accidental disengagement.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Drive the end through the eye using a ball peen hammer and then weld or flatten the extended end to close. These links are also known as cold shuts.

Also known as lap links or repair links.

A lip on the shackle keeps the pin from falling out when loosened.

For use in low-vibration applications where the shackle remains stationary.

To prevent these shackles from snagging or accidentally coming undone, their pin doesn’t stick out from their body.

A lip on the shackle keeps the screw from falling out when loosened.

For use in low-vibration applications where the shackle remains stationary.

The bolt on these shackles is fastened with a nut and cotter pin, making them more secure than shackles with a screw pin. Also known as D-shackles, they have a narrow opening that restricts the movement of wire rope and chain.

The pin doesn’t stick out from their body, so these shackles won’t snag or accidentally come undone. They have a narrow opening that restricts the movement of wire rope and chain.

A lip on the shackle keeps the pin from falling out when loosened.

The twisted shape of these shackles keeps rope and chain from twisting and knotting. And if their screw becomes loose, the lip on the shackles prevents it from falling out.

Attach a rope to the ring on the pin for remote release where access in limited. These shackles have an eye end for connecting to a hook.

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.

Adjust the chain length and number of legs without changing slings.

Grab hooks can securely hold onto a single link of chain to shorten a leg or create loops.

Pull crates, boxes, and bales. Also known as manhole hooks and chain hooks.