We will reply to your message within an hour.
More
Also known as quick links, these links thread closed by hand or with a wrench.
The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.
Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.
Best for attaching different widths of webbing and strapping, the flat sides ensure they lay flat and won't bunch or slide.
The twisted shape of these links prevents loads from rotating or knotting.
Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.
Also known as lap links or repair links.
Strike the prongs with a ball peen hammer and they expand to hold the connecting link together.
Drive the end through the eye using a ball peen hammer and then weld or flatten the extended end to close. These links are also known as cold shuts.
Restrict rope and chain movement with the narrow end, attach multiple connectors to the wide end, and then hammer these links closed.
Often used with transport chain, these links are good for binding, tying down, and pulling loads.
Also known as C-links, the notch in these links lets you slip additional links on or remove links quickly.
Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.
Smaller than lifting oblong links, these links provide room for snaps, carabiners, and other non-lifting connectors.
The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.
Hang, pull, and secure loads. These rings are good for general non-lifting applications.
Hammer the pin through the center to assemble these links. They’re also known as hammer locks and sling links.
Once secured with the included locking pin, these links must be cut off to be removed.
The wide end of these links has more room for attachments than standard figure-eight links.
The flat side lets webbing and strapping lay flat, so they don’t slide and bunch.
Also known as master and sling links, a large inner diameter provides room to attach multiple connectors or legs on a sling.
Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.
Use these links for general lifting applications.
Use these links to connect the ends of chain to form a longer chain or create a loop for key chains and ID tags.
Thread chain through the hole of these links to form an adjustable loop or connect chain ends to form a longer chain.
Thick side plates allow this chain to handle greater capacity than standard chain.
Roller chain links engage with matched sprocket teeth to transmit power between rotating shafts.
Through-hardened pins keep these chains strong over time while handling frequent jolts from motor startups, emergency braking, and sudden reversing.
This self-lubricating nickel-plated steel chain has better corrosion resistance than steel chain and does not require regular maintenance.
This treated steel chain has over eight times the capacity of stainless steel chain.
With oil-embedded bushings and oil-coated pins, this chain is self-lubricating, which means it requires less maintenance than standard ANSI roller chain.
Plastic bushings as well as stainless steel pins and outer side plates give this chain a longer service life than other lightweight chain.
Made of 316 stainless steel, this is our most corrosion-resistant chain.
This 304 stainless steel roller chain is more corrosion resistant than treated steel roller chain.
A rubber ring seals grease between the bushings and pins and keeps out dust and other contaminants.
Also known as side bow chain, this chain has extra clearance between components for flexing from side to side on systems with curved tracks and sprockets that aren’t exactly aligned.
This chain is made of steel.
This steel chain handles higher loads than stainless steel chain.
Made of stainless steel, this chain has excellent corrosion resistance.
This treated steel chain has over six times the capacity of stainless steel chain.
Keep an assortment of extra steel links on hand for maintenance and repairs. Assortments include connecting, adding, and adding-and-connecting links.
Flat, oblong side plates make these links ideal for use with flat-edge ANSI roller chain.
Replace lost or damaged spring clips to secure the pins on your connecting links.
Made of treated steel, these links offer increased corrosion resistance over steel attachment links.
These links are made of steel.
This treated steel chain has over seven times the capacity of stainless steel chain.
Made of stainless steel, this chain has excellent corrosion resistance and can handle heavier working loads than plastic miniature roller chain.