McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    100 Products

    Center-Channel Roller Chain Guides

    Image of ProductInUse. Front orientation. Roller Chain Guides. Center-Channel Roller Chain Guides.
    These guides align chain more precisely than open-channel guides. Use them to minimize friction, reduce noise, and prolong the life of your roller chain. They can be cut to the exact length you need.
    PTFE—PTFE guides withstand higher temperatures than polyethylene guides. They’re also FDA compliant for direct contact with food.
    Overall
    Style
    For Roller
    Chain Trade No.
    Ht.
    Wd.
    Ctr. Channel
    Wd.
    Max. Temp.,
    ° F
    Food Industry Std.
    Choose a Length, ft.
    Per
    Ft.
    For Single-Strand ANSI Roller Chain
     
    Image of Specification. Front orientation. Style A. Center-Channel Roller Chain Guides.

    Style A

    Image of Specification. Front orientation. Style B.

    Style B

    Image of Specification. Front orientation. Style C.

    Style C

    Polyethylene
    A400.31"1.00"0.25"175—1, 2, 3, 4, 5, 6, 7, 893095K5000000
    A500.38"1.25"0.31"175—1, 2, 3, 4, 5, 6, 7, 893095K600000
    A600.50"1.50"0.44"175—1, 2, 3, 4, 5, 6, 7, 893095K700000
    A800.50"2.00"0.56"175—1, 2, 3, 4, 5, 6, 7, 893095K800000
    B400.31"1.00"0.25"175—1, 3, 4, 5, 6, 893095K900000
    B500.31"1.25"0.31"175—1, 3, 4, 5, 6, 893095K4600000
    B600.31"1.25"0.44"175—1, 3, 4, 5, 6, 893095K1600000
    B800.38"1.50"0.56"175—1, 3, 4, 5, 6, 893095K1700000
    C400.59"0.79"0.29"175—1, 3, 4, 5, 6, 893095K1800000
    C500.59"0.79"0.35"175—1, 3, 4, 5, 6, 893095K1900000
    C600.59"1.10"0.46"175—1, 3, 4, 5, 6, 893095K2100000
    C800.71"1.34"0.60"175—1, 3, 4, 5, 6, 893095K2200000
     
    Image of Specification. Front orientation. Style A. Center-Channel Roller Chain Guides.

    Style A

    PTFE
    A400.31"1.00"0.25"450FDA Compliant 21 CFR 177.1550
    		1, 493095K82100000
    A500.38"1.25"0.31"450FDA Compliant 21 CFR 177.1550
    		1, 493095K82300000
    A600.50"1.50"0.44"450FDA Compliant 21 CFR 177.1550
    		1, 493095K82500000
    A800.50"2.00"0.56"450FDA Compliant 21 CFR 177.1550
    		1, 493095K82700000
     

    Open-Channel Roller Chain Guides

    Image of ProductInUse. Front orientation. Roller Chain Guides. Open-Channel Roller Chain Guides.
    Minimize friction, reduce noise, and prolong the life of your roller chain. Guides can be cut to the exact length you need.
    PTFE—PTFE guides withstand higher temperatures than polyethylene guides. They’re also FDA compliant for direct contact with food.
    Overall
    For Roller
    Chain Trade No.
    Ht.
    Wd.
    Max. Temp.,
    ° F
    Food Industry Std.
    Choose a Length, ft.
    Per
    Ft.
    For Single-Strand ANSI Roller Chain
     
    Polyethylene
    400.31"1.25"175—1, 2, 3, 4, 5, 6, 7, 893095K1000000
    500.38"1.25"175—1, 2, 3, 4, 5, 6, 7, 893095K200000
    600.38"1.50"175—1, 2, 3, 4, 5, 6, 7, 893095K300000
    800.50"2.00"175—1, 2, 3, 4, 5, 6, 7, 893095K400000
     
    PTFE
    400.31"1.25"450FDA Compliant 21 CFR 177.1550
    		1, 493095K52100000
    500.38"1.25"450FDA Compliant 21 CFR 177.1550
    		1, 493095K52300000
    600.38"1.50"450FDA Compliant 21 CFR 177.1550
    		1, 493095K52500000
    800.50"2.00"450FDA Compliant 21 CFR 177.1550
    		1, 493095K52700000
     

    Chain Belt Conveyor Wear Strips

    Image of Product. Front orientation. Conveyor Wear Strips. Chain Belt Conveyor Wear Strips, Style A.
    Image of Product. Front orientation. Conveyor Wear Strips. Chain Belt Conveyor Wear Strips, Style B.
    Image of Product. Front orientation. Conveyor Wear Strips. Chain Belt Conveyor Wear Strips, Style C.

    Style A

    Style B

    Style C

    Image of Product. Front orientation. Conveyor Wear Strips. Chain Belt Conveyor Wear Strips, Style D.
    Image of Product. Front orientation. Conveyor Wear Strips. Chain Belt Conveyor Wear Strips, Style E.
    Image of Attribute. Front orientation. Contains Annotated.

    Style D

    Style E

    Attach these strips to conveyor frames to reduce friction and abrasion on chain belts. Made from UHMW polyethylene, they have a slippery surface that keeps your belt from sticking. They hold up to repeated bumps, scrapes, and rubbing.
    Lubricated Conveyor Wear Strips—Lubricated strips are more slippery than strips without lubricant, for the least amount of friction. They're good for high-speed applications and noise reduction.
    Outside
    Conveyor Wear Strips
    Lubricated
    Conveyor Wear Strips
    Style
    Wd.
    Ht.
    Base
    Wd.
    Thk.
    For Max.
    Frame Thk.
    Color
    Each
    Color
    Each
    UHMW Polyethylene
     
    5 ft. Long
    A7/8"3/8"3/4"1/8"1/8"White6369K511000000————0
    B3/4"3/8"3/4"1/8"1/8"White6369K2400000Gray6369K519000000
    B1"7/16"3/4"3/16"1/8"White6369K2500000————0
    B1 1/2"7/16"3/4"3/16"1/8"White6369K2600000————0
    B2"7/16"3/4"3/16"1/8"White6369K2700000————0
     
    10 ft. Long
    A7/8"3/8"3/4"1/8"1/8"White6369K51200000Gray6369K51500000
    B3/4"3/8"3/4"1/8"1/8"White6369K51700000Gray6369K52100000
    C7/8"3/8"1/2"1/8"11/64"White6369K53100000————0
    C15/16"3/8"1/2"1/8"11/64"White6369K54400000————0
    D1"3/8"1/2"1/8"9/64"————0Gray6369K53600000
    D1"1/2"1/2"3/16"3/16"White6369K54100000————0
    E1 3/8"9/16"11/16"3/16"17/64"White6369K565000000————0
    E1 1/2"3/8"1/2"1/8"1/8"White6369K55300000Gray6369K55600000
    E2"3/8"1/2"1/8"9/64"White6369K55800000Gray6369K56200000
     
    20 ft. Long
    A7/8"3/8"3/4"1/8"1/8"White6369K51300000————0
    B3/4"3/8"3/4"1/8"1/8"White6369K51800000Gray6369K52200000
    C15/16"3/8"1/2"1/8"11/64"White6369K54500000————0
    D1"3/8"1/2"1/8"9/64"————0Gray6369K53700000
    D1"1/2"1/2"3/16"3/16"White6369K54200000————0
    E1 1/2"3/8"1/2"1/8"1/8"White6369K55400000Gray6369K55700000
    E2"3/8"1/2"1/8"9/64"————0Gray6369K563000000
     
    100 ft. Long
    C15/16"3/8"1/2"1/8"11/64"White6369K546000000————0
    D1"1/2"1/2"3/16"3/16"White6369K543000000————0
     

    Deep-Channel Roller Chain Guides

    Image of ProductInUse. Guide. Front orientation. Roller Chain Guides. Deep-Channel Roller Chain Guides, 304 Stainless Steel Frame.
    Image of ProductInUse. Guide with Flanged Frame. Front orientation. Roller Chain Guides. Deep-Channel Roller Chain Guides, Flanged Frame.

    Guide

    Guide with Flanged

    Frame

    Also known as captured guides, deep-channel guides prevent chain from slipping off track. Use them to minimize friction, reduce noise, and prolong the life of your roller chain. They can be cut to the exact length you need.
    Flanged Frame—Guides with flanged frame allow easy mounting. Stainless steel frames are more corrosion resistant than steel frames.
    Overall
    For Roller
    Chain Trade No.
    Ht.
    Wd.
    Channel
    Dp.
    Mounting Fasteners
    Included
    Mounting
    Hole Dia.
    Max. Temp.,
    ° F
    Choose a Length, ft.
    Per
    Ft.
    For Single-Strand ANSI Roller Chain
     
    Polyethylene with 304 Stainless Steel Frame
    400.94"1.18"0.55"——1751, 2, 3, 4, 5, 6, 7, 893095K45000000
    500.94"1.18"0.65"——1751, 2, 3, 4, 5, 6, 7, 893095K2400000
    601.13"1.18"0.82"——1751, 2, 3, 4, 5, 6, 7, 893095K2500000
    801.58"1.77"1.19"——1751, 2, 3, 4, 5, 6, 7, 893095K26000000
     
    Polyethylene with Steel Flanged Frame
    350.98"2.09"0.37"No5/16"1751, 2, 3, 4, 5, 6, 7, 893095K2700000
    400.98"2.09"0.53"No5/16"1751, 2, 3, 4, 5, 6, 7, 893095K2800000
    500.98"2.09"0.64"No5/16"1751, 2, 3, 4, 5, 6, 7, 893095K2900000
    600.98"2.09"0.81"No5/16"1751, 2, 3, 4, 5, 6, 7, 893095K3500000
     
    Polyethylene with 304 Stainless Steel Flanged Frame
    500.98"2.09"0.64"No5/16"1751, 3, 4, 6, 893095K38000000
    600.98"2.09"0.81"No5/16"1751, 3, 4, 6, 893095K39000000
     

    Modular Mini Chain Belt Conveyors

    Image of System. Front orientation. Contains Annotated. Conveyors. Modular Mini Chain Belt Conveyors.
    Build a mini conveyor in any shape you need. These conveyors have curved, straight, incline, and decline runs that you can quickly join together with the included brackets. They're often used in areas with limited floor space and applications that require frequent layout changes. To customize your conveyor, add on components, such as package stops and merge guides, with the built-in T-slots on the side. These conveyors come with guides installed.
    You'll need a drive assembly, an idler assembly, and a belt to complete your conveyor. To determine the belt length you need, multiply your conveyor’s length by 2.1. If you need a belt longer than what’s available, you can connect multiple together. Use a belt installation tool to pull out the pin, then line up two ends and push the pin in with the tool to connect them. You can also shorten a belt using the same tool.
    Maximum run length is 70 ft. with two 90° curves. Adding more curved conveyors will reduce the run length.
    Wear Strips
    Image of Product. Front orientation. Conveyors. Modular Mini Chain Belt Conveyors, Wear Strips.
    Wear strips create a slippery surface on the inside of the conveyor frame for parts as they move along the conveyor, so they won't get scratched or scuffed. Attach them to the conveyor frame.
    3 ft. Long
    9 ft. Long
    Ht.
    Color
    Material
    Each
    Each
    7/8"WhiteHDPE4766N116000004766N115000000
     

    Plastic Edge Trim

    Image of Product. Front orientation. Edge Trim. Plastic Edge Trim, Style 1.
    Image of Product. Front orientation. Edge Trim. Plastic Edge Trim, Style 2.
    Image of Product. Front orientation. Edge Trim. Plastic Edge Trim, Style 5.
    Image of Product. Front orientation. Edge Trim. Plastic Edge Trim, Style 7.

    Style 1

    Style 2

    Style 5

    Style 7

    Image of Product. Front orientation. Edge Trim. Plastic Edge Trim, Style 8.
    Image of Product. Front orientation. Edge Trim. Plastic Edge Trim, Style 9.
    Image of Product. Front orientation. Edge Trim. Plastic Edge Trim, Style 10.

    Style 8

    Style 9

    Style 10

    This hard plastic edge trim prevents denting and wear on everything from enclosure panels to safety mirrors. It stands up to knocks and scrapes over longer periods than our rubber and foam trim, though it doesn’t offer the same protective cushion when people and parts bump against it.
    Push On
    Image of Product. Front orientation. Edge Trim. Plastic Edge Trim, Style 1.
    Image of Product. Front orientation. Edge Trim. Plastic Edge Trim, Style 2.
    Image of Product. Front orientation. Edge Trim. Plastic Edge Trim, Style 5.

    Style 1

    Style 2

    Style 5

    Image of Product. Front orientation. Edge Trim. Plastic Edge Trim, Style 7.
    Image of Product. Front orientation. Edge Trim. Plastic Edge Trim, Style 8.
    Image of Product. Front orientation. Edge Trim. Plastic Edge Trim, Style 9.

    Style 7

    Style 8

    Style 9

    Image of Attribute. Front orientation. Contains Annotated. Plastic Edge Trim, Style 1.
    Image of Attribute. Front orientation. Contains Annotated. Plastic Edge Trim, Style 2.

    Style 1

    Style 2

    Image of Attribute. Front orientation. Contains Annotated. Plastic Edge Trim, Style 5.
    Image of Attribute. Front orientation. Contains Annotated. Plastic Edge Trim, Style 7.

    Style 5

    Style 7

    Image of Attribute. Front orientation. Contains Annotated. Plastic Edge Trim, Style 8.
    Image of Attribute. Front orientation. Contains Annotated. Plastic Edge Trim, Style 9.

    Style 8

    Style

    9

    Slippery MDS-Filled Nylon—Install this extremely smooth trim on conveyor guides, flow rails, and lane dividers to help ease parts around corners and curves.
    High-Temperature Slippery PTFE—Stays strong and flexible at temperatures about twice as high as our other plastic trim. It’s also the slipperiest edge trim we offer, so it helps maintain a constant flow of parts on chutes, slides, and other conveying equipment.
    Hardness Rating—The harder the edge trim, the better it withstands impact and abrasion over time. The softer the edge trim, the more cushioning it provides for fragile materials such as glass and thin metal.
    Inside
    Outside
    Style
    Wd.
    (A)
    Ht.
    (B)
    Wd.
    (C)
    Ht.
    (D)
    Opening
    Wd. (E)
    Flexibility
    Temp. Range,
    ° F
    For Use
    Outdoors
    Color
    Hardness
    Hardness
    Rating
    Choose a Length, ft.
    Per
    Ft.
    Slippery MDS-Filled Nylon
    11/16"7/32"11/64"9/32"—Rigid-40 to 220NoGrayNot RatedHard10, 25, 50, 1008721K3500000
    11/8"1/4"1/4"5/16"—Rigid-40 to 220NoGrayNot RatedHard10, 25, 50, 1008721K360000
    111/64"7/32"5/16"3/8"—Rigid-40 to 220NoGrayNot RatedHard10, 25, 50, 1008721K160000
    117/64"19/64"27/64"3/8"—Rigid-40 to 220NoGrayNot RatedHard10, 25, 50, 1008721K370000
    27/64"15/32"5/16"41/64"—Rigid-40 to 220NoGrayNot RatedHard10, 25, 50, 1008721K130000
    21/8"1/4"15/64"21/64"—Rigid-40 to 220NoGrayNot RatedHard10, 25, 50, 1008721K120000
    21/8"7/16"1/4"1/2"—Rigid-40 to 220NoGrayNot RatedHard10, 25, 50, 1008721K140000
    213/64"15/16"21/64"1"—Rigid-40 to 220NoGrayNot RatedHard10, 25, 50, 1008721K420000
    21/4"7/16"23/64"1/2"—Rigid-40 to 220NoGrayNot RatedHard10, 25, 50, 1008721K150000
    73/16"3/8"5/16"1"—Rigid-40 to 220NoGrayNot RatedHard10, 25, 50, 1008721K110000
    75/16"3/8"7/16"1"—Rigid-40 to 220NoGrayNot RatedHard68721K270000
    85/8"——29/64"3/8"Rigid-40 to 220NoGrayNot RatedHard68721K250000
    849/64"——17/32"3/8"Rigid-40 to 220NoGrayNot RatedHard68721K260000
     
    High-Temperature Slippery PTFE
    11/8"1/4"9/32"11/32"—Flexible-350 to 500YesWhiteDurometer 55DHard2, 5, 89272K3500000
    11/4"3/8"1/2"1/2"—Flexible-350 to 500YesWhiteDurometer 55DHard2, 5, 89272K3600000
    13/8"1/2"3/4"5/8"—Flexible-350 to 500YesWhiteDurometer 55DHard2, 5, 89272K3700000
    51"1"1 1/4"1 1/4"1/2"Flexible-350 to 500YesWhiteDurometer 55DHard2, 5, 89272K3300000
    711/64"35/64"7/16"1"—Flexible-350 to 500YesWhiteDurometer 55DHard2, 5, 89272K4200000
    81/2"—11/16"25/64"3/8"Flexible-350 to 500YesWhiteDurometer 55DHard2, 5, 89272K2500000
    85/8"—13/16"15/32"13/32"Flexible-350 to 500YesWhiteDurometer 55DHard2, 5, 89272K2600000
    83/4"—15/16"5/8"17/32"Flexible-350 to 500YesWhiteDurometer 55DHard2, 5, 89272K2700000
    91/2"—11/16"——Flexible-350 to 500YesWhiteDurometer 55DHard2, 5, 89272K4500000
     
    Adhesive Back
    Image of Product. Front orientation. Edge Trim. Plastic Edge Trim, Style 10.

    Style 10

    Image of Attribute. Front orientation. Contains Annotated. Plastic Edge Trim, Style 10.

    Style 10

    Abrasion- and Chemical-Resistant PEEK—Withstands cleaning with the harshest chemicals while protecting edges from frequent scuffing and wear.
    Chemical-Resistant Slippery UHMW Polyethylene—Eases friction on panel doors, drawers, and other sliding surfaces while standing up to chemicals such as coolant, hydraulic fluid, and fuels. While PTFE is even slipperier, UHMW polyethylene stands up better to abrasion and wear.
    High-Temperature Slippery PTFE—Stays strong and flexible at temperatures about twice as high as our other plastic trim. It’s also the slipperiest edge trim we offer, so it helps maintain a constant flow of parts on chutes, slides, and other conveying equipment.
    Hardness Rating—The harder the edge trim, the better it withstands impact and abrasion over time. The softer the edge trim, the more cushioning it provides for fragile materials such as glass and thin metal.
    Outside
    Style
    Wd.
    (C)
    Ht.
    (D)
    Flexibility
    Temp. Range,
    ° F
    For Use
    Outdoors
    Color
    Hardness
    Hardness
    Rating
    Lg.,
    ft.
    Each
    Abrasion- and Chemical-Resistant PEEK
    101"0.007"Extra Flexible-40 to 300NoBeigeNot RatedHard97165T21000000
    102"0.007"Extra Flexible-40 to 300NoBeigeNot RatedHard17165T2200000
     
    Chemical-Resistant Slippery UHMW Polyethylene
    101/2"0.022"Extra Flexible0 to 120NoSemi-Clear WhiteDurometer 65DHard157165T310000
    101"0.022"Extra Flexible0 to 120NoSemi-Clear WhiteDurometer 65DHard157165T4200000
    102"0.022"Extra Flexible0 to 120NoSemi-Clear WhiteDurometer 65DHard157165T4100000
    106"0.022"Extra Flexible0 to 120NoSemi-Clear WhiteDurometer 65DHard37165T3200000
    1012"0.022"Extra Flexible0 to 120NoSemi-Clear WhiteDurometer 65DHard37165T3300000
     
    High-Temperature Slippery PTFE
    101/2"0.005"Extra Flexible40 to 500NoBeigeNot RatedMedium Hard157165T120000
    101"0.005"Extra Flexible40 to 500NoBeigeNot RatedMedium Hard157165T1300000
    101 1/2"0.005"Extra Flexible40 to 500NoBeigeNot RatedMedium Hard157165T1400000
    102"0.005"Extra Flexible40 to 500NoBeigeNot RatedMedium Hard157165T1500000
     
    Screw In
    Image of Product. Front orientation. Edge Trim. Plastic Edge Trim, Style 1.
    Image of Attribute. Front orientation. Contains Annotated. Plastic Edge Trim, Style 1.

    Style 1

    Style 1

    High-Temperature Slippery PTFE—Stays strong and flexible at temperatures about twice as high as our other plastic trim. It’s also the slipperiest edge trim we offer, so it helps maintain a constant flow of parts on chutes, slides, and other conveying equipment.
    Hardness Rating—The harder the edge trim, the better it withstands impact and abrasion over time. The softer the edge trim, the more cushioning it provides for fragile materials such as glass and thin metal.
    Inside
    Outside
    Per Ft.
    Style
    Wd.
    (A)
    Ht.
    (B)
    Wd.
    (C)
    Ht.
    (D)
    Flexibility
    Temp. Range,
    ° F
    For Use
    Outdoors
    Color
    Hardness
    Hardness
    Rating
    Choose a Length,
    ft.
    1-7
    8-Up
    High-Temperature Slippery PTFE
    11"39/64"1 1/4"47/64"Flexible-350 to 500YesWhiteDurometer 55DHard2, 5, 89272K31000000000000
     
    back to top