Use this strong chain for binding loads, tie downs, and towing applications.

The twisted links allow this chain to lie flatter than other light duty chain.

This chain is approximately 50% stronger than Grade 30 chain.

With a maximum temperature of 500° F, this chain withstands higher temperatures than other steel chain.

Small, twisted links make this chain the most resistant to tangling and knotting.

The links have smooth sides to prevent the chain from snagging.

Securely tie down items and lock up tools.

Not only is this chain made of hardened steel for cut resistance, it has a nylon sleeve to protect against abrasion.

Also known as sash cord, this thin chain is used over pulleys and for hanging double-hung window sashes. The flat links fold back on themselves for maximum flexibility.

These links allow you to mount chain with a screw, bolt, or rivet.

Thread chain through the hole of these links to form an adjustable loop or connect chain ends to form a longer chain.

Also known as ball chain, use this chain to keep tools with machines, keys with chucks, and gas and dust caps with tanks.

The fitting lets you connect the ends of chain to form a longer chain or create a loop for key chains and ID tags.

A vinyl cover prevents the chain from scratching items that come in contact with it.

The links are trimmed to allow chain to sit closer against a chain wheel or sprocket.

Strong and durable, use this chain for your lifting applications.

The strongest chain grade we offer, it’s approximately 20% stronger than Grade 100 chain and 50% stronger than Grade 80 chain.

Also known as quick links, these links thread closed by hand or with a wrench.

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Best for attaching different widths of webbing and strapping, the flat sides ensure they lay flat and won't bunch or slide.

Also known as lap links or repair links.

Drive the end through the eye using a ball peen hammer and then weld or flatten the extended end to close. These links are also known as cold shuts.

Also known as C-links, the notch in these links lets you slip additional links on or remove links quickly.

Hang, pull, and secure loads. These rings are good for general non-lifting applications.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

A pear-shaped link and hook for chain shortening allow you to create an adjustable-length chain sling.

Once secured with the included locking pin, these links must be cut off to be removed.

The wide end of these links has more room for attachments than standard figure-eight links.

Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

The strongest shackles we offer, these connectors have a pin with flush ends that prevents snagging and accidental disengagement.

The pins have flush ends to prevent snagging and accidental disengagement.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

For use in low-vibration applications where the shackle remains stationary.

To prevent these shackles from snagging or accidentally coming undone, their pin doesn’t stick out from their body.

Cotter pins secure each end of these shackles for temporary installations.

For use in low-vibration applications where the shackle remains stationary.

Indentations in the shackle body hold the head of the pin in place once fastened.

Since they close with a screw pin, these shackles are quick to install and remove by hand, but should only be used in low-vibration environments where they’ll remain stationary. Their narrow opening restricts the movement of wire rope and chain.

The bolt on these shackles is fastened with a nut and cotter pin, making them more secure than shackles with a screw pin. Also known as D-shackles, they have a narrow opening that restricts the movement of wire rope and chain.

The flat side lets webbing and strapping lay flat, so they don’t slide and bunch. These shackles have a pin that screws in, so they’re quick to open and close by hand.

Since their pin doesn’t stick out from their body, these shackles won’t snag or accidentally come undone. They have a twisted shape to prevent rope and chain from twisting and knotting.

Attach a rope to the ring on the pin for remote release where access is limited. These shackes have a clevis end for making pivoting connections.

Pull the collar to release the shackle from its locked position.

Slide the clevis pin into these hooks to attach chain. A latch ensures rope, chain, and fittings won't detach from the hook when the load slackens.

Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.

The opening on these hooks fits large anchor points and allows chain to slide through when the hook is closed. They have a spring latch to ensure rope, chain, and fittings won't detach from the hook when the load slackens.

Slide the clevis pin into these hooks to attach chain, no extra fittings needed.

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the clevis end.

For a more secure connection than standard hooks, these clevis hooks have a latch that locks closed when a load is applied.

Rotate these hooks for easy positioning before lifting your load. They have a latch that locks when a load is applied for a more secure connection than standard hooks.

For a more secure connection than standard hooks, these hooks have a latch that locks closed when a load is lifted. A ball-bearing swivel allows them to rotate under a load.

These rotate for easy positioning before a load is applied.

Also known as foundry hooks, use these on thick molds, castings, and objects that don't have attachment points.

Often used in binding and tie-down applications, these hooks have a narrow opening to securely hold a single link of chain.

The latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Attach chain to the eye end of these hooks.

These snaps have an eye that rotates for easy positioning.

The force of the load helps keep the arms closed. Press the trigger for quick connection and disconnection.

For a more secure connection than standard trigger-locking snaps, squeeze the trigger and slide the latch grip down to release.

Squeeze the trigger to quickly release the latch.

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

These rotate for easy positioning before a load is applied to minimize twisting and knotting of rope and chain.

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

Roller chain links engage with matched sprocket teeth to transmit power between rotating shafts.

This 304 stainless steel roller chain is more corrosion resistant than treated steel roller chain.

Made of 316 stainless steel, this is our most corrosion-resistant chain.

Plastic bushings as well as stainless steel pins and outer side plates give this chain a longer service life than other lightweight chain.

With oil-embedded bushings and oil-coated pins, this chain is self-lubricating, which means it requires less maintenance than standard ANSI roller chain.

This self-lubricating nickel-plated steel chain has better corrosion resistance than steel chain and does not require regular maintenance.

Made of stainless steel, this chain has excellent corrosion resistance.

Also known as leaf chain and counterbalance chain, this chain is used with pulleys rather than sprockets for low-speed pulling and as counterweight chain for machine tools, elevator and oven doors, and forklift masts.

Made of stainless steel, this chain has excellent corrosion resistance.

These links are made of steel.

Twice as long as standard links, these are designed for use with Double-Pitch ANSI Roller Chain.

Keep an assortment of extra steel links on hand for maintenance and repairs. Assortments include connecting, adding, and adding-and-connecting links.

Made of stainless steel, this chain has excellent corrosion resistance.

With self-lubricating pins and bushings, this metric roller chain requires less maintenance than standard roller chain.

This acetal plastic chain is light, quiet, and nonconductive. Its links snap together, so you don't need connecting links.

Drive out chain pins with a twist of the handle.

Hook into your roller chain and use the handle to tighten the jaw until the chain ends are close enough to add or remove a link. Choose from holders with maximum jaw capacity from 1 3/4” to 5”.

These guides align chain more precisely than open-channel guides.

Also known as captured guides, deep-channel guides prevent chain from slipping off track.

Twist these tools on the spring-clip to remove it.

Place these steel inserts between two roller links. If they can be inserted past your ANSI number, the chain is worn out.

Mount these tensioners directly onto your chain drive. They have adjustable straps that take up slack and apply constant tension.

Precisely apply tension in a straight line by moving the adjustment screw.

Apply continuous tension and automatically take up slack at any point in a 180° arc.

These tensioners range in height from 5 15/32" to 7 25/32".

These guards are steel.