McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    39 Products

    Threaded Check Valves for Harsh Chemicals

    These valves open to allow flow in one direction and close when flow stops or reverses.
    PVDF Body—Spring-Loaded Ball
    Image of Product. Front orientation. Check Valves. Threaded Check Valves for Harsh Chemicals, PVDF Body—Spring-Loaded Ball.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    For Use With
    Ball Material
    Spring Material
    Seal Material
    Each
    NPT Male Inlet × NPT Male Outlet
    1/8 Not Rated220 psi @ 70° F2.540 to 180White1"Any Angle, Horizontal, VerticalAir, Ammonia, Butane, Carbon Dioxide, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Natural Gas, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Sodium Hydroxide (Caustic Soda), Toluene (Methylbenzene), Water, Xylene316 Stainless Steel
    		316 Stainless Steel
    		Fluoroelastomer
    		46505K21000000
    1/4 Not Rated220 psi @ 70° F2.540 to 180White1 7/16"Any Angle, Horizontal, VerticalAir, Ammonia, Butane, Carbon Dioxide, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Natural Gas, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Sodium Hydroxide (Caustic Soda), Toluene (Methylbenzene), Water, Xylene316 Stainless Steel
    		316 Stainless Steel
    		Fluoroelastomer
    		46505K3100000
    3/8 Not Rated220 psi @ 70° F2.540 to 180White1 1/2"Any Angle, Horizontal, VerticalAir, Ammonia, Butane, Carbon Dioxide, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Natural Gas, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Sodium Hydroxide (Caustic Soda), Toluene (Methylbenzene), Water, Xylene316 Stainless Steel
    		316 Stainless Steel
    		Fluoroelastomer
    		46505K3300000
    1/2 Not Rated220 psi @ 70° F2.540 to 180White1 13/16"Any Angle, Horizontal, VerticalAir, Ammonia, Butane, Carbon Dioxide, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Natural Gas, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Sodium Hydroxide (Caustic Soda), Toluene (Methylbenzene), Water, Xylene316 Stainless Steel
    		316 Stainless Steel
    		Fluoroelastomer
    		46505K3500000
     
    PVC Body—Ball
    Image of Product. Front orientation. Check Valves. Threaded Check Valves for Harsh Chemicals, PVC Body—Ball.
    For Drinking Water—Valves for drinking water meet NSF/ANSI 61.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    Specs.
    Met
    Food Industry
    Std.
    For Use With
    Ball
    Material
    Seal Material
    Each
    NPT Female Inlet × NPT Female Outlet
    1/4 1150 psi @ 70° F1.535 to 140Dark Gray3"Horizontal, VerticalASTM D1784NSF/ANSI 61
    		Air, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Drinking Water, Ethanol, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Mineral Spirits, Natural Gas, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), WaterPVC
    		Fluoroelastomer
    		4721K11000000
    3/8 3150 psi @ 70° F1.535 to 140Dark Gray3"Horizontal, VerticalASTM D1784NSF/ANSI 61
    		Air, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Drinking Water, Ethanol, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Mineral Spirits, Natural Gas, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), WaterPVC
    		Fluoroelastomer
    		4721K1200000
    3 250150 psi @ 70° F1.535 to 140Dark Gray10 9/16"Horizontal, VerticalASTM D1784NSF/ANSI 61
    		Air, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Drinking Water, Ethanol, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Mineral Spirits, Natural Gas, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), WaterPVC
    		Fluoroelastomer
    		4721K22000000
    4 400150 psi @ 70° F1.535 to 140Dark Gray12 15/16"Horizontal, VerticalASTM D1784NSF/ANSI 61
    		Air, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Drinking Water, Ethanol, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Mineral Spirits, Natural Gas, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), WaterPVC
    		Fluoroelastomer
    		4721K23000000
     
    CPVC Body—Ball
    Image of Product. Front orientation. Check Valves. Threaded Check Valves for Harsh Chemicals, CPVC Body—Ball.
    For Drinking Water—Valves for drinking water meet NSF/ANSI 61.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    Specs.
    Met
    Food Industry
    Std.
    For Use With
    Ball
    Material
    Seal Material
    Each
    NPT Female Inlet × NPT Female Outlet
    3 250150 psi @ 70° F1.535 to 190Dark Gray10 9/16"Horizontal, VerticalASTM D1784NSF/ANSI 61
    		Air, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Drinking Water, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Natural Gas, Nitric Acid, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, WaterCPVC
    		Fluoroelastomer
    		4721K250000000
    4 400150 psi @ 70° F1.535 to 190Dark Gray12 15/16"Horizontal, VerticalASTM D1784NSF/ANSI 61
    		Air, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Drinking Water, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Natural Gas, Nitric Acid, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, WaterCPVC
    		Fluoroelastomer
    		4721K2600000000
     

    Check Valves with Push-to-Connect Fittings for Harsh Chemicals

    Image of Product. Back orientation. Check Valves. Check Valves with Push-to-Connect Fittings for Harsh Chemicals.
    Connect your inlet tubing into the push-to-connect fittings—no heat, solder, or flux required. These valves have a PVDF body and a fluoroelastomer seal for excellent chemical resistance. They open to allow flow in one direction and close when flow stops or reverses.
    For Tube
    OD
    Pipe
    Size
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    For Use With
    Piston
    Material
    Spring
    Material
    Seal Material
    Each
    PVDF Body
     
    Push-to-Connect Inlet × NPTF Male Outlet
    3/8"1/4
    		300 psi @ 70° F0.50 to 250Black1 3/8"Air, Argon, Butane, Carbon Dioxide, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Krypton, Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Water, Xenon, XylenePVDF
    		Stainless Steel
    		Fluoroelastomer
    		2048N11000000
     

    Socket-Connect Check Valves for Harsh Chemicals

    Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. These valves have a plastic body and a fluoroelastomer seal for excellent chemical resistance. They open to allow flow in one direction and close when flow stops or reverses.
    PVC Body—Spring-Loaded Piston
    Image of Product. Front orientation. Check Valves. Socket-Connect Check Valves for Harsh Chemicals.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Pipe
    Size
    For Pipe
    Schedule
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    Specs.
    Met
    For Use With
    Piston
    Material
    Spring
    Material
    Seal Material
    Each
    Socket Connect × Socket Connect—Pressure Class Not Rated
    1/2 40, 80
    		0.8150 psi @ 70° F240 to 140Dark Gray3 3/8"Horizontal, VerticalASTM D1784Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Sodium Hypochlorite (Bleach), WaterPVC
    		PVC
    		Fluoroelastomer
    		1939N10000000
    3/440, 80
    		3150 psi @ 70° F240 to 140Dark Gray4 3/16"Horizontal, VerticalASTM D1784Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Sodium Hypochlorite (Bleach), WaterPVC
    		PVC
    		Fluoroelastomer
    		1939N2000000
    1 40, 80
    		9150 psi @ 70° F240 to 140Dark Gray5 3/16"Horizontal, VerticalASTM D1784Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Sodium Hypochlorite (Bleach), WaterPVC
    		PVC
    		Fluoroelastomer
    		1939N3000000
    1 1/4 40, 80
    		26150 psi @ 70° F240 to 140Dark Gray6 5/8"Horizontal, VerticalASTM D1784Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Sodium Hypochlorite (Bleach), WaterPVC
    		PVC
    		Fluoroelastomer
    		1939N4000000
    1 1/2 40, 80
    		45150 psi @ 70° F240 to 140Dark Gray6 5/8"Horizontal, VerticalASTM D1784Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Sodium Hypochlorite (Bleach), WaterPVC
    		PVC
    		Fluoroelastomer
    		1939N5000000
    240, 80
    		65150 psi @ 70° F240 to 140Dark Gray7 5/8"Horizontal, VerticalASTM D1784Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Sodium Hypochlorite (Bleach), WaterPVC
    		PVC
    		Fluoroelastomer
    		1939N6000000
     
    CPVC Body—Spring-Loaded Piston
    Image of Product. Front orientation. Check Valves. Socket-Connect Check Valves for Harsh Chemicals.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Pipe
    Size
    For Pipe
    Schedule
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    Specs.
    Met
    For Use With
    Piston
    Material
    Spring
    Material
    Seal Material
    Each
    Socket Connect × Socket Connect—Pressure Class Not Rated
    1/2 40, 80
    		0.8150 psi @ 70° F240 to 190Light Gray3 3/8"Horizontal, VerticalASTM D1784Citric Acid, Deionized Water, Diesel Fuel, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Sodium Hypochlorite (Bleach), WaterCPVC
    		CPVC
    		Fluoroelastomer
    		1939N110000000
    3/440, 80
    		3150 psi @ 70° F240 to 190Light Gray4 3/16"Horizontal, VerticalASTM D1784Citric Acid, Deionized Water, Diesel Fuel, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Sodium Hypochlorite (Bleach), WaterCPVC
    		CPVC
    		Fluoroelastomer
    		1939N12000000
    1 40, 80
    		9150 psi @ 70° F240 to 190Light Gray5 3/16"Horizontal, VerticalASTM D1784Citric Acid, Deionized Water, Diesel Fuel, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Sodium Hypochlorite (Bleach), WaterCPVC
    		CPVC
    		Fluoroelastomer
    		1939N13000000
    1 1/2 40, 80
    		45150 psi @ 70° F240 to 190Light Gray6 5/8"Horizontal, VerticalASTM D1784Citric Acid, Deionized Water, Diesel Fuel, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Sodium Hypochlorite (Bleach), WaterCPVC
    		CPVC
    		Fluoroelastomer
    		1939N15000000
    240, 80
    		65150 psi @ 70° F240 to 190Light Gray7 5/8"Horizontal, VerticalASTM D1784Citric Acid, Deionized Water, Diesel Fuel, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Sodium Hypochlorite (Bleach), WaterCPVC
    		CPVC
    		Fluoroelastomer
    		1939N16000000
     

    Check Valves with Barbed Fittings for Harsh Chemicals

    Prevent backflow in chemical tubing lines. These valves have barbed fittings that grip onto tubing, providing a secure hold. The plastic body and fluoroelastomer seal provide excellent chemical resistance. Valves open to allow flow in one direction and close when flow stops or reverses.
    PVDF Body—Diaphragm
    Image of Product. Front orientation. Diaphragm Check Valve. Check Valves with Barbed Fittings for Harsh Chemicals.
    PVDF valve resists abrasion and UV light.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Flow Coefficient
    (Cv)
    For Tube
    ID
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting
    Position
    For Use With
    Diaphragm
    Material
    Seal Material
    Each
    Barbed Male Inlet × Barbed Male Outlet
    Not Rated1/4" 15 psi @ 70° F0.5-20 to 250White1 21/32"HorizontalAir, Butane, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Hydrochloric Acid, Nitric Acid, Oil, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite (Bleach), Sulfuric Acid, WaterFluoroelastomer
    		Fluoroelastomer
    		47245K3700000
     
    Polypropylene Body—Spring-Loaded Ball
    Image of Product. Front orientation. Spring-Loaded Ball Check Valve. Check Valves with Barbed Fittings for Harsh Chemicals.
    Polypropylene valves are more corrosion resistant than nylon valves.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Flow Coefficient
    (Cv)
    For Tube
    ID
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    For Use With
    Ball Material
    Spring Material
    Seal Material
    Each
    Barbed Male Inlet × Barbed Male Outlet
    0.11/8" 125 psi @ 70° F130 to 140White1 3/8"Any Angle, Horizontal, VerticalAcetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, Xenon, Xylene316 Stainless Steel
    		302 Stainless Steel
    		Fluoroelastomer
    		7757K4400000
    0.23/16"125 psi @ 70° F130 to 140White1 3/4"Any Angle, Horizontal, VerticalAcetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, Xenon, Xylene316 Stainless Steel
    		302 Stainless Steel
    		Fluoroelastomer
    		7757K450000
    0.31/4" 125 psi @ 70° F130 to 140White2 1/16"Any Angle, Horizontal, VerticalAcetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, Xenon, Xylene316 Stainless Steel
    		302 Stainless Steel
    		Fluoroelastomer
    		7757K460000
     
    Nylon Body—Spring-Loaded Ball
    Image of Product. Front orientation. Spring-Loaded Ball Check Valve. Check Valves with Barbed Fittings for Harsh Chemicals.
    Nylon valves are more impact resistant than polypropylene valves.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Flow Coefficient
    (Cv)
    For Tube
    ID
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    For Use With
    Ball Material
    Spring Material
    Seal Material
    Each
    Barbed Male Inlet × Barbed Male Outlet
    0.11/8" 125 psi @ 70° F135 to 140White1 3/8"Any Angle, Horizontal, VerticalAcetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, Xenon, Xylene316 Stainless Steel
    		302 Stainless Steel
    		Fluoroelastomer
    		6079T5700000
    0.23/16"125 psi @ 70° F135 to 140White1 3/4"Any Angle, Horizontal, VerticalAcetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, Xenon, Xylene316 Stainless Steel
    		302 Stainless Steel
    		Fluoroelastomer
    		6079T580000
    0.31/4" 125 psi @ 70° F135 to 140White2 1/16"Any Angle, Horizontal, VerticalAcetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, Xenon, Xylene316 Stainless Steel
    		302 Stainless Steel
    		Fluoroelastomer
    		6079T590000
     

    Easy-Install Threaded Check Valves for Harsh Chemicals

    To reduce installation time and allow for maintenance without detaching pipe connections, these valves have union fittings. The plastic body and fluoroelastomer seal provide excellent chemical resistance. Valves open to allow flow in one direction and close when flow stops or reverses.
    Polypropylene Body—Ball
    Image of Product. Assembled View. Front orientation. Check Valves. Easy-Install Threaded Check Valves for Harsh Chemicals.
    Image of Product. Exploded View. Front orientation. Exploded view. Check Valves. Easy-Install Threaded Check Valves for Harsh Chemicals.

    Assembled View

    Exploded View

    Polypropylene valves are more corrosion resistant than PVC or CPVC valves.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    Specs.
    Met
    For Use With
    Ball
    Material
    Seal Material
    Each
    NPT Female × NPT Female
    1/2 4.8150 psi @ 70° F135 to 160White4 11/16"Horizontal, VerticalASTM D4101Air, Ammonia, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Natural Gas, Oil, Oxygen, Phosphoric Acid, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), WaterPolypropylene
    		Fluoroelastomer
    		4851K410000000
    3/47.7150 psi @ 70° F135 to 160White4 3/4"Horizontal, VerticalASTM D4101Air, Ammonia, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Natural Gas, Oil, Oxygen, Phosphoric Acid, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), WaterPolypropylene
    		Fluoroelastomer
    		4851K42000000
    1 11150 psi @ 70° F135 to 160White5 3/8"Horizontal, VerticalASTM D4101Air, Ammonia, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Natural Gas, Oil, Oxygen, Phosphoric Acid, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), WaterPolypropylene
    		Fluoroelastomer
    		4851K43000000
    1 1/2 45150 psi @ 70° F135 to 160White6 3/4"Horizontal, VerticalASTM D4101Air, Ammonia, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Natural Gas, Oil, Oxygen, Phosphoric Acid, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), WaterPolypropylene
    		Fluoroelastomer
    		4851K44000000
    2130150 psi @ 70° F135 to 160White8 1/8"Horizontal, VerticalASTM D4101Air, Ammonia, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Natural Gas, Oil, Oxygen, Phosphoric Acid, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), WaterPolypropylene
    		Fluoroelastomer
    		4851K45000000
     

    Flanged Check Valves for Harsh Chemicals

    Bolt these valves to ANSI flanges. The glass-filled vinyl ester body and PTFE seal stand up to a wide range of harsh chemicals. Valves open to allow flow in one direction and close when flow stops or reverses.
    Glass-Filled Vinyl Ester Body—Ball
    Image of Product. Front orientation. Check Valves. Flanged Check Valves for Harsh Chemicals.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting
    Position
    For Flange
    Class
    Flange
    OD
    No. of Bolt
    Holes
    Bolt Hole
    Size
    Bolt Circle
    Dia.
    Bolts
    Included
    Specs. Met
    For Use With
    Ball
    Material
    Seal
    Material
    Each
    Flanged × Flanged
    1 35200 psi @ 250° F1-40 to 250Beige5"Vertical150
    		4 1/4"45/8"3 1/8"NoASME B16.10, ASME B16.5Ammonia, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Oil, Phosphoric Acid, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, XylenePTFE
    		PTFE
    		1869N10000000
    254140 psi @ 250° F1-40 to 250Beige7"Vertical150
    		6"43/4"4 3/4"NoASME B16.10, ASME B16.5Ammonia, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Oil, Phosphoric Acid, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, XylenePTFE
    		PTFE
    		1869N3000000
     

    Clear-View Socket-Connect Check Valves for Harsh Chemicals

    Visually inspect flow and debris accumulation through the transparent valve body. Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. Valves have a PVC body and a fluoroelastomer seal for excellent chemical resistance. They open to allow flow in one direction and close when flow stops or reverses. All have a removable cap that provides easy access to internal components for maintenance.
    PVC Body
    Image of Product. Front orientation. Check Valves. Clear-View Socket-Connect Check Valves for Harsh Chemicals.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Pipe
    Size
    For Pipe
    Schedule
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    Features
    Specs. Met
    For Use With
    Piston
    Material
    Seal Material
    Each
    Socket Connect × Socket Connect
    1/2 40, 80
    		6.7150 psi @ 70° F0.2935 to 140Clear5 5/8"Any Angle, Horizontal, VerticalRemovable CapASTM D1784, ASTM D1785Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Hydrochloric Acid, Methanol (Methyl Alcohol), Nitric Acid, Phosphoric Acid, Salt Water, Sulfuric Acid, WaterPVC
    		Fluoroelastomer
    		4754K42000000
    3/440, 80
    		11.9150 psi @ 70° F0.2935 to 140Clear6 5/16"Any Angle, Horizontal, VerticalRemovable CapASTM D1784, ASTM D1785Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Hydrochloric Acid, Methanol (Methyl Alcohol), Nitric Acid, Phosphoric Acid, Salt Water, Sulfuric Acid, WaterPVC
    		Fluoroelastomer
    		4754K4300000
    1 40, 80
    		21150 psi @ 70° F0.2935 to 140Clear6 7/8"Any Angle, Horizontal, VerticalRemovable CapASTM D1784, ASTM D1785Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Hydrochloric Acid, Methanol (Methyl Alcohol), Nitric Acid, Phosphoric Acid, Salt Water, Sulfuric Acid, WaterPVC
    		Fluoroelastomer
    		4754K4400000
     
    back to top