McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    43 Products

    Compact Threaded Check Valves

    With a shorter end-to-end length than other check valves, these fit in tight spaces. They open to allow flow in one direction and close when flow stops or reverses.
    NPT Male Inlet × NPT Male Outlet
    Image of Product. Male Inlet × Male Outlet. Front orientation. Contains Annotated. Male. Compact Threaded Check Valves, Male.

    Male Inlet × Male

    Outlet

    303 Stainless Steel Body—303 stainless steel valves are more corrosion resistant than brass valves.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Brass Body
    303 Stainless
    Steel Body
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    End-to-End
    Lg.
    For Use With
    Ball Material
    Each
    Each
    304 Stainless Steel Seal
    1/8 0.081200 psi @ 70° F235 to 3001"Air, Nitrogen, Water304 Stainless Steel
    		8567T110000008567T12000000
    1/4 0.19200 psi @ 70° F235 to 3001 3/8"Air, Nitrogen, Water304 Stainless Steel
    		8567T21000008567T2200000
     
    304 Stainless Steel Seal with Loctite® Internal Sealant
    1/8 0.0812,000 psi @ 70° F235 to 3001"Air, Nitrogen, Water304 Stainless Steel
    		8567T301000008567T30300000
    1/4 0.192,000 psi @ 70° F235 to 3001 3/8"Air, Nitrogen, Water304 Stainless Steel
    		8567T302000008567T30400000
     
    NPT Male Inlet × NPT Female Outlet
    Image of Product. Male Inlet × Female Outlet. Front orientation. Contains Annotated. Female. Compact Threaded Check Valves, Male.

    Male Inlet ×

    Female Outlet

    303 Stainless Steel Body—303 stainless steel valves are more corrosion resistant than brass valves.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Brass Body
    303 Stainless
    Steel Body
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    End-to-End
    Lg.
    For Use With
    Ball Material
    Each
    Each
    304 Stainless Steel Seal
    1/8 0.081200 psi @ 70° F235 to 3007/8"Air, Nitrogen, Water304 Stainless Steel
    		8567T3050000008567T309000000
    1/4 0.19200 psi @ 70° F235 to 3001 1/4"Air, Nitrogen, Water304 Stainless Steel
    		8567T306000008567T31300000
     
    NPT Female Inlet × NPT Male Outlet
    Image of Product. Female Inlet × Male Outlet. Back orientation. Contains Annotated. Male. Compact Threaded Check Valves, Female.

    Female Inlet ×

    Male Outlet

    303 Stainless Steel Body—303 stainless steel valves are more corrosion resistant than brass valves.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Brass Body
    303 Stainless
    Steel Body
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    End-to-End
    Lg.
    For Use With
    Ball Material
    Each
    Each
    304 Stainless Steel Seal
    1/8 0.081200 psi @ 70° F235 to 3007/8"Air, Nitrogen, Water304 Stainless Steel
    		8567T3070000008567T311000000
    1/4 0.19200 psi @ 70° F235 to 3001 1/4"Air, Nitrogen, Water304 Stainless Steel
    		8567T308000008567T31200000
     
    UNF Female Inlet × UNF Female Outlet
    Image of Product. Female Inlet × Female Outlet. Front orientation. Contains Annotated. Female. Compact Threaded Check Valves, Female.

    Female Inlet ×

    Female Outlet

    303 Stainless Steel Body—303 stainless steel valves are more corrosion resistant than brass valves.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Brass Body
    303 Stainless
    Steel Body
    Thread
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    End-to-End
    Lg.
    For Use With
    Ball Material
    Each
    Each
    304 Stainless Steel Seal
    10-32 0.081125 psi @ 70° F235 to 15013/16"Air, Nitrogen, Water304 Stainless Steel
    		8567T310000008567T32000000
     

    Check Valves with Push-to-Connect Fittings for Harsh Chemicals

    Image of Product. Back orientation. Check Valves. Check Valves with Push-to-Connect Fittings for Harsh Chemicals.
    Connect your inlet tubing into the push-to-connect fittings—no heat, solder, or flux required. These valves have a PVDF body and a fluoroelastomer seal for excellent chemical resistance. They open to allow flow in one direction and close when flow stops or reverses.
    For Tube
    OD
    Pipe
    Size
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    For Use With
    Piston
    Material
    Spring
    Material
    Seal Material
    Each
    PVDF Body
     
    Push-to-Connect Inlet × NPTF Male Outlet
    3/8"1/4
    		300 psi @ 70° F0.50 to 250Black1 3/8"Air, Argon, Butane, Carbon Dioxide, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Krypton, Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Water, Xenon, XylenePVDF
    		Stainless Steel
    		Fluoroelastomer
    		2048N11000000
     

    Check Valves with Push-to-Connect Fittings

    Insert tubing into the push-to-connect fittings—no heat, solder, or flux required. These valves open to allow flow in one direction and close when flow stops or reverses.
    Nickel-Plated Brass Body—Push-to-Connect Female Inlet × Push-to-Connect Female Outlet Straight
    Image of Product. Push-to-Connect Female Inlet x Push-to-Connect Female Outlet Straight. Front orientation. Contains Annotated. Straight. Check Valves with Push-to-Connect Fittings, Nickel-Plated Brass Body, Female.

    Push-to-Connect Female

    Inlet x Push-to-Connect

    Female Outlet Straight

    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    For Tube
    OD
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    End-to-End
    Lg.
    For Use With
    Piston
    Material
    Spring Material
    Seal Material
    Each
    1/4"Not Rated115 psi @ 70° F30 to 1602 1/16"Air, Argon, Helium, Krypton, Neon, Nitrogen, Oil, Water, XenonBrass302 Stainless Steel
    		Viton® Fluoroelastomer
    		1866T114000000
    3/8"Not Rated115 psi @ 70° F30 to 1602 1/4"Air, Argon, Helium, Krypton, Neon, Nitrogen, Oil, Water, XenonBrass302 Stainless Steel
    		Viton® Fluoroelastomer
    		1866T11500000
    4 mmNot Rated115 psi @ 70° F30 to 1751 3/4"Air, Helium, Krypton, Neon, Nitrogen, Oil, Water, XenonBrass302 Stainless Steel
    		Buna-N
    		1866T11100000
    6 mmNot Rated115 psi @ 70° F30 to 1752 1/16"Air, Helium, Krypton, Neon, Nitrogen, Oil, Water, XenonBrass302 Stainless Steel
    		Buna-N
    		1866T11200000
    8 mmNot Rated115 psi @ 70° F30 to 1752 1/4"Air, Helium, Krypton, Neon, Nitrogen, Oil, Water, XenonBrass302 Stainless Steel
    		Buna-N
    		1866T11300000

    Ultra-Chemical-Resistant Threaded Check Valves

    The most chemical-resistant check valves in our offering, these have a PFA body to withstand methyl ethyl ketone, sodium hypochlorite, and other extremely harsh chemicals. They open to allow flow in one direction and close when flow stops or reverses.
    PFA Body—Spring-Loaded Piston
    Image of Product. Female × Female. Front orientation. Contains Annotated. Check Valves. Ultra-Chemical-Resistant Threaded Check Valves, PFA Body—Spring-Loaded Piston, Female.
    Image of Product. Female × Male. Front orientation. Contains Annotated. Check Valves. Ultra-Chemical-Resistant Threaded Check Valves, PFA Body—Spring-Loaded Piston, Male, Female.

    Female × Female

    Female × Male

    Image of Product. Male × Female. Front orientation. Contains Annotated. Check Valves. Ultra-Chemical-Resistant Threaded Check Valves, PFA Body—Spring-Loaded Piston, Female, Male.
    Image of Product. Male × Male. Front orientation. Contains Annotated. Check Valves. Ultra-Chemical-Resistant Threaded Check Valves, PFA Body—Spring-Loaded Piston, Male.

    Male × Female

    Male × Male

    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    For Use With
    Piston
    Material
    Spring
    Material
    Each
    NPT Female Inlet × NPT Female Outlet
    1/4 0.75125 psi @ 150° F10 to 210Semi-Clear White2 3/8"Any Angle, Horizontal, VerticalAcetone, Ammonia, Butane, Carbon Dioxide, Citric Acid, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Water, XylenePTFE
    		PTFE
    		47155K710000000
    1/2 4100 psi @ 150° F10 to 210Semi-Clear White3 3/8"Any Angle, Horizontal, VerticalAcetone, Ammonia, Butane, Carbon Dioxide, Citric Acid, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Water, XylenePTFE
    		PTFE
    		47155K73000000
     
    NPT Female Inlet × NPT Male Outlet
    1/4 0.75125 psi @ 150° F10 to 210Semi-Clear White2 7/16"Any Angle, Horizontal, VerticalAcetone, Ammonia, Butane, Carbon Dioxide, Citric Acid, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Water, XylenePTFE
    		PTFE
    		47155K74000000
     
    NPT Male Inlet × NPT Female Outlet
    1/4 0.75125 psi @ 150° F10 to 210Semi-Clear White2 1/16"Any Angle, Horizontal, VerticalAcetone, Ammonia, Butane, Carbon Dioxide, Citric Acid, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Water, XylenePTFE
    		PTFE
    		47155K76000000
     
    NPT Male Inlet × NPT Male Outlet
    1/4 0.75125 psi @ 150° F10 to 210Semi-Clear White2 7/16"Any Angle, Horizontal, VerticalAcetone, Ammonia, Butane, Carbon Dioxide, Citric Acid, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Water, XylenePTFE
    		PTFE
    		47155K75000000
     

    Check Valves with Barbed Fittings for Harsh Chemicals

    Prevent backflow in chemical tubing lines. These valves have barbed fittings that grip onto tubing, providing a secure hold. The plastic body and fluoroelastomer seal provide excellent chemical resistance. Valves open to allow flow in one direction and close when flow stops or reverses.
    Polypropylene Body—Spring-Loaded Ball
    Image of Product. Front orientation. Spring-Loaded Ball Check Valve. Check Valves with Barbed Fittings for Harsh Chemicals.
    Polypropylene valves are more corrosion resistant than nylon valves.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Flow Coefficient
    (Cv)
    For Tube
    ID
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    For Use With
    Ball Material
    Spring Material
    Seal Material
    Each
    Barbed Male Inlet × Barbed Male Outlet
    0.11/8" 125 psi @ 70° F130 to 140White1 3/8"Any Angle, Horizontal, VerticalAcetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, Xenon, Xylene316 Stainless Steel
    		302 Stainless Steel
    		Fluoroelastomer
    		7757K4400000
    0.23/16"125 psi @ 70° F130 to 140White1 3/4"Any Angle, Horizontal, VerticalAcetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, Xenon, Xylene316 Stainless Steel
    		302 Stainless Steel
    		Fluoroelastomer
    		7757K450000
    0.31/4" 125 psi @ 70° F130 to 140White2 1/16"Any Angle, Horizontal, VerticalAcetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, Xenon, Xylene316 Stainless Steel
    		302 Stainless Steel
    		Fluoroelastomer
    		7757K460000
     
    Nylon Body—Spring-Loaded Ball
    Image of Product. Front orientation. Spring-Loaded Ball Check Valve. Check Valves with Barbed Fittings for Harsh Chemicals.
    Nylon valves are more impact resistant than polypropylene valves.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Flow Coefficient
    (Cv)
    For Tube
    ID
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    For Use With
    Ball Material
    Spring Material
    Seal Material
    Each
    Barbed Male Inlet × Barbed Male Outlet
    0.11/8" 125 psi @ 70° F135 to 140White1 3/8"Any Angle, Horizontal, VerticalAcetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, Xenon, Xylene316 Stainless Steel
    		302 Stainless Steel
    		Fluoroelastomer
    		6079T5700000
    0.23/16"125 psi @ 70° F135 to 140White1 3/4"Any Angle, Horizontal, VerticalAcetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, Xenon, Xylene316 Stainless Steel
    		302 Stainless Steel
    		Fluoroelastomer
    		6079T580000
    0.31/4" 125 psi @ 70° F135 to 140White2 1/16"Any Angle, Horizontal, VerticalAcetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, Xenon, Xylene316 Stainless Steel
    		302 Stainless Steel
    		Fluoroelastomer
    		6079T590000
     

    Vacuum Breakers for Chemicals

    A plastic body withstands pH neutralizing, cleaning, and plating solutions containing sodium hydroxide, methyl ethyl ketone, and other harsh chemicals. Also known as vacuum-breaking valves, these valves have vents that open when pressure drops to relieve vacuum conditions and prevent backward suction from drawing liquid into upstream piping.
    Diaphragm Check Valve
    Image of Product. Front orientation. Vacuum Breakers. Vacuum Breakers for Chemicals.
    Material
    CPVC Body
    PVC Body
    Inlet Pipe
    Size
    Outlet
    Pipe SIze
    For Pipe
    Schedule
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    End-to-End
    Lg.
    Seal
    DIaphragm
    For Use With
    Temp. Range,
    ° F
    Color
    Each
    Temp. Range,
    ° F
    Color
    Each
    NPT Female Inlet × NPT Female Outlet
    1/2
    		1/2
    		80
    		Not Rated100 psi @ 75° F14 5/16"Fluoroelastomer
    		Fluoroelastomer
    		Beverage, Food, Air, Ammonia, Argon, Carbon Dioxide, Chlorinated Water, Diesel Fuel, Drinking Water, Ethylene Glycol, Helium, Hydrochloric Acid, Kerosene, Krypton, Liquid Carbon Dioxide, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oil, Oxygen, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Water, Xenon40 to 180Light Gray1868N13000000040 to 140Gray1868N10000000
    3/4
    		3/4
    		80
    		Not Rated100 psi @ 75° F14 5/8"Fluoroelastomer
    		Fluoroelastomer
    		Beverage, Food, Air, Ammonia, Argon, Carbon Dioxide, Chlorinated Water, Diesel Fuel, Drinking Water, Ethylene Glycol, Helium, Hydrochloric Acid, Kerosene, Krypton, Liquid Carbon Dioxide, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oil, Oxygen, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Water, Xenon40 to 180Light Gray1868N1400000040 to 140Gray1868N11000000
    1
    		1
    		80
    		Not Rated100 psi @ 75° F15 1/8"Fluoroelastomer
    		Fluoroelastomer
    		Beverage, Food, Air, Ammonia, Argon, Carbon Dioxide, Chlorinated Water, Diesel Fuel, Drinking Water, Ethylene Glycol, Helium, Hydrochloric Acid, Kerosene, Krypton, Liquid Carbon Dioxide, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oil, Oxygen, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Water, Xenon40 to 180Light Gray1868N1500000040 to 140Gray1868N12000000
     
    Spring-Loaded Piston Check Valve
    Image of Product. Front orientation. Vacuum Breakers. Vacuum Breakers for Chemicals.
    Material
    CPVC Body
    PVC Body
    Inlet Pipe
    Size
    Outlet
    Pipe SIze
    For Pipe
    Schedule
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    End-to-End
    Lg.
    Seal
    Piston
    Spring
    For Use With
    Temp. Range,
    ° F
    Color
    Each
    Temp. Range,
    ° F
    Color
    Each
    NPT Female Inlet × NPT Female Outlet
    1 1/2
    		1 1/2
    		80
    		Not Rated100 psi @ 75° F17 15/16"Fluoroelastomer
    		CPVC
    		PolymerBeverage, Food, Air, Ammonia, Argon, Carbon Dioxide, Chlorinated Water, Diesel Fuel, Drinking Water, Ethylene Glycol, Helium, Hydrochloric Acid, Kerosene, Krypton, Liquid Carbon Dioxide, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oil, Oxygen, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Water, Xenon40 to 180Light Gray1868N180000000—————0
    2
    		2
    		80
    		Not Rated100 psi @ 75° F18 1/2"Fluoroelastomer
    		PVC
    		PolymerBeverage, Food, Air, Ammonia, Argon, Carbon Dioxide, Chlorinated Water, Diesel Fuel, Drinking Water, Ethylene Glycol, Helium, Hydrochloric Acid, Kerosene, Krypton, Liquid Carbon Dioxide, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oil, Oxygen, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Water, Xenon—————040 to 140Gray1868N170000000
     
    back to top