McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    12 Products

    Check Valves with Push-to-Connect Fittings for Harsh Chemicals

    Image of Product. Back orientation. Check Valves. Check Valves with Push-to-Connect Fittings for Harsh Chemicals.
    Connect your inlet tubing into the push-to-connect fittings—no heat, solder, or flux required. These valves have a PVDF body and a fluoroelastomer seal for excellent chemical resistance. They open to allow flow in one direction and close when flow stops or reverses.
    For Tube
    OD
    Pipe
    Size
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    For Use With
    Piston
    Material
    Spring
    Material
    Seal Material
    Each
    PVDF Body
     
    Push-to-Connect Inlet × NPTF Male Outlet
    3/8"1/4
    		300 psi @ 70° F0.50 to 250Black1 3/8"Air, Argon, Butane, Carbon Dioxide, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Krypton, Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Water, Xenon, XylenePVDF
    		Stainless Steel
    		Fluoroelastomer
    		2048N11000000
     

    Ultra-Chemical-Resistant Threaded Check Valves

    The most chemical-resistant check valves in our offering, these have a PFA body to withstand methyl ethyl ketone, sodium hypochlorite, and other extremely harsh chemicals. They open to allow flow in one direction and close when flow stops or reverses.
    PFA Body—Spring-Loaded Piston
    Image of Product. Female × Female. Front orientation. Contains Annotated. Check Valves. Ultra-Chemical-Resistant Threaded Check Valves, PFA Body—Spring-Loaded Piston, Female.
    Image of Product. Female × Male. Front orientation. Contains Annotated. Check Valves. Ultra-Chemical-Resistant Threaded Check Valves, PFA Body—Spring-Loaded Piston, Female, Male.

    Female × Female

    Female × Male

    Image of Product. Male × Female. Front orientation. Contains Annotated. Check Valves. Ultra-Chemical-Resistant Threaded Check Valves, PFA Body—Spring-Loaded Piston, Male, Female.
    Image of Product. Male × Male. Front orientation. Contains Annotated. Check Valves. Ultra-Chemical-Resistant Threaded Check Valves, PFA Body—Spring-Loaded Piston, Male.

    Male × Female

    Male × Male

    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    For Use With
    Piston
    Material
    Spring
    Material
    Each
    NPT Female Inlet × NPT Female Outlet
    1/4 0.75125 psi @ 150° F10 to 210Semi-Clear White2 3/8"Any Angle, Horizontal, VerticalAcetone, Ammonia, Butane, Carbon Dioxide, Citric Acid, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Water, XylenePTFE
    		PTFE
    		47155K710000000
    1/2 4100 psi @ 150° F10 to 210Semi-Clear White3 3/8"Any Angle, Horizontal, VerticalAcetone, Ammonia, Butane, Carbon Dioxide, Citric Acid, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Water, XylenePTFE
    		PTFE
    		47155K73000000
     
    NPT Female Inlet × NPT Male Outlet
    1/4 0.75125 psi @ 150° F10 to 210Semi-Clear White2 7/16"Any Angle, Horizontal, VerticalAcetone, Ammonia, Butane, Carbon Dioxide, Citric Acid, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Water, XylenePTFE
    		PTFE
    		47155K74000000
     
    NPT Male Inlet × NPT Female Outlet
    1/4 0.75125 psi @ 150° F10 to 210Semi-Clear White2 1/16"Any Angle, Horizontal, VerticalAcetone, Ammonia, Butane, Carbon Dioxide, Citric Acid, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Water, XylenePTFE
    		PTFE
    		47155K76000000
     
    NPT Male Inlet × NPT Male Outlet
    1/4 0.75125 psi @ 150° F10 to 210Semi-Clear White2 7/16"Any Angle, Horizontal, VerticalAcetone, Ammonia, Butane, Carbon Dioxide, Citric Acid, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Water, XylenePTFE
    		PTFE
    		47155K75000000
     

    Check Valves with Barbed Fittings for Harsh Chemicals

    Prevent backflow in chemical tubing lines. These valves have barbed fittings that grip onto tubing, providing a secure hold. The plastic body and fluoroelastomer seal provide excellent chemical resistance. Valves open to allow flow in one direction and close when flow stops or reverses.
    PVDF Body—Diaphragm
    Image of Product. Front orientation. Diaphragm Check Valve. Check Valves with Barbed Fittings for Harsh Chemicals.
    PVDF valve resists abrasion and UV light.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Flow Coefficient
    (Cv)
    For Tube
    ID
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting
    Position
    For Use With
    Diaphragm
    Material
    Seal Material
    Each
    Barbed Male Inlet × Barbed Male Outlet
    Not Rated1/4" 15 psi @ 70° F0.5-20 to 250White1 21/32"HorizontalAir, Butane, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Hydrochloric Acid, Nitric Acid, Oil, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite (Bleach), Sulfuric Acid, WaterFluoroelastomer
    		Fluoroelastomer
    		47245K3700000
     

    Threaded Check Valves for Harsh Chemicals

    These valves open to allow flow in one direction and close when flow stops or reverses.
    CPVC Body—Ball
    Image of Product. Front orientation. Check Valves. Threaded Check Valves for Harsh Chemicals, CPVC Body—Ball.
    For Drinking Water—Valves for drinking water meet NSF/ANSI 61.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    Specs.
    Met
    Food Industry
    Std.
    For Use With
    Ball
    Material
    Seal Material
    Each
    NPT Female Inlet × NPT Female Outlet
    3 250150 psi @ 70° F1.535 to 190Dark Gray10 9/16"Horizontal, VerticalASTM D1784NSF/ANSI 61
    		Air, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Drinking Water, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Natural Gas, Nitric Acid, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, WaterCPVC
    		Fluoroelastomer
    		4721K250000000
    4 400150 psi @ 70° F1.535 to 190Dark Gray12 15/16"Horizontal, VerticalASTM D1784NSF/ANSI 61
    		Air, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Drinking Water, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Natural Gas, Nitric Acid, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, WaterCPVC
    		Fluoroelastomer
    		4721K2600000000
     

    Clear-View Socket-Connect Check Valves for Harsh Chemicals

    Visually inspect flow and debris accumulation through the transparent valve body. Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. Valves have a PVC body and a fluoroelastomer seal for excellent chemical resistance. They open to allow flow in one direction and close when flow stops or reverses. All have a removable cap that provides easy access to internal components for maintenance.
    PVC Body
    Image of Product. Front orientation. Check Valves. Clear-View Socket-Connect Check Valves for Harsh Chemicals.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Pipe
    Size
    For Pipe
    Schedule
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    Features
    Specs. Met
    For Use With
    Piston
    Material
    Seal Material
    Each
    Socket Connect × Socket Connect
    1/2 40, 80
    		6.7150 psi @ 70° F0.2935 to 140Clear5 5/8"Any Angle, Horizontal, VerticalRemovable CapASTM D1784, ASTM D1785Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Hydrochloric Acid, Methanol (Methyl Alcohol), Nitric Acid, Phosphoric Acid, Salt Water, Sulfuric Acid, WaterPVC
    		Fluoroelastomer
    		4754K42000000
    3/440, 80
    		11.9150 psi @ 70° F0.2935 to 140Clear6 5/16"Any Angle, Horizontal, VerticalRemovable CapASTM D1784, ASTM D1785Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Hydrochloric Acid, Methanol (Methyl Alcohol), Nitric Acid, Phosphoric Acid, Salt Water, Sulfuric Acid, WaterPVC
    		Fluoroelastomer
    		4754K4300000
    1 40, 80
    		21150 psi @ 70° F0.2935 to 140Clear6 7/8"Any Angle, Horizontal, VerticalRemovable CapASTM D1784, ASTM D1785Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Hydrochloric Acid, Methanol (Methyl Alcohol), Nitric Acid, Phosphoric Acid, Salt Water, Sulfuric Acid, WaterPVC
    		Fluoroelastomer
    		4754K4400000
     
    back to top