Chemical Hose Nozzles
Adjust the flow while dispensing liquid chemicals. Nozzles are polypropylene, which is lightweight with excellent chemical resistance. They shut off manually.
Style A has a lever to turn flow on and off. It has a higher flow rate and bigger spout than Style B to dispense large quantities of liquid chemicals into drums and tanks quickly.
Style B has a trigger to turn flow on and off. It has an angled design, which reduces hose kinking for efficient fueling. Nozzle has a barbed connection; twist hose onto the barbed end and secure with a clamp. Use to transfer citric acid, nitric acid, phosphoric acid, and sodium hydroxide from pumps and processing equipment.
Warning: Do not leave nozzles unattended when in use.
For technical drawings and 3-D models, click on a part number.
Spout | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Max. Flow Rate, gpm | Pipe Size  | For Hose ID | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Shut-Off Type | Each | |
For Use With Citric Acid, Ethyl Alcohol, Phosphoric Acid, and Sodium Hydroxide | ||||||||||||
| A | 180 | 1 1/2 | __ | Threaded NPT Female | 225 psi @ 72° F | -20° to 150° | 1 7/8" | 7" | Polypropylene Plastic | Manual | 00000000 | 000000 |
| A | 200 | 2 | __ | Threaded NPT Female | 200 psi @ 72° F | -20° to 150° | 2 3/8" | 7" | Polypropylene Plastic | Manual | 00000000 | 00000 |
| A | 240 | 2 | __ | Threaded NPT Female | 225 psi @ 72° F | -20° to 150° | 2 3/8" | 7" | Polypropylene Plastic | Manual | 00000000 | 00000 |
For Use With Citric Acid, Nitric Acid, Phosphoric Acid, and Sodium Hydroxide | ||||||||||||
| B | 40 | __ | 1/2" | Barbed Male | 150 psi @ 72° F | 32° to 105° | 31/32" | 4 1/2" | Polypropylene Plastic | Manual | 00000000 | 000000 |
| B | 40 | __ | 3/4" | Barbed Male | 150 psi @ 72° F | 32° to 105° | 31/32" | 4 1/2" | Polypropylene Plastic | Manual | 00000000 | 000000 |
| B | 40 | __ | 1" | Barbed Male | 150 psi @ 72° F | 32° to 105° | 31/32" | 4 1/2" | Polypropylene Plastic | Manual | 00000000 | 000000 |
Diesel-Fuel Hose Nozzles
Control the flow while dispensing diesel fuel. Nozzles are aluminum, which is lightweight with good corrosion resistance.
Nozzles with automatic shut-off will stop dispensing when the tank is full or if the nozzle falls from the tank. They have a built-in check valve that reduces spillage when withdrawing the nozzle from tank. Nozzles have an angled design, which reduces hose kinking for efficient fueling. They come with a plastic scuff guard to protect the nozzle from damage.
Nozzles with manual shut-off have a trigger to stop the flow. Do not leave the nozzle unattended when in use.
Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.
Style A is also known as a service-station-style nozzle. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. Attach an optional splash guard (sold separately) to protect your hands from spray.
Styles B and C are also known as truck-stop nozzles. They have higher flow rates than Style A to dispense large quantities of fuel quickly. Style C includes a splash guard to protect your hands from spray.
Use hold-open clip kits to replace a broken clip. Install with pliers.
For technical drawings and 3-D models, click on a part number.
Nozzles | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spout | Scuff Guard | Threaded Swivels | Replacement Hold-Open Clip Kits | ||||||||||||||
| Style | Max. Flow Rate, gpm | Pipe Size | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Color | Shut-Off Type | Specifications Met | Each | Each | Each | |||
Nozzles | |||||||||||||||||
| A | 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 15/16" | 6 1/2" | Aluminum | Green | Automatic, Manual | UL Listed | 0000000 | 0000000 | 000000 | 00 | 000000 | 00 |
| A | 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 15/16" | 6 1/2" | Aluminum | Red | Automatic, Manual | UL Listed | 0000000 | 000000 | 0000000 | 000000 | 000000 | 00 |
| B | 25 | 1 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 1 1/8" | 6 13/16" | Aluminum | Green | Automatic, Manual | UL Listed | 0000000 | 000000 | 0000000 | 000000 | 000000 | 00 |
Nozzles with Three-Position Hold-Open Clip | |||||||||||||||||
| A | 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 15/16" | 6 1/2" | Aluminum | Green | Automatic, Manual | __ | 0000000 | 000000 | 000000 | 00 | 0000000 | 000000 |
| C | 75 | 1 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 1 3/8" | 7" | Aluminum | Green | Automatic, Manual | UL Listed | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
Coolant Hose Nozzles
Dispense and control the flow of coolant with these nozzles. They have a built-in check valve to reduce spillage when withdrawing the nozzle from the tank. Nozzles shut off manually, so you’ll have to release the trigger to stop the flow. They are brass for good corrosion resistance.
Warning: Do not leave nozzles unattended when in use.
For technical drawings and 3-D models, click on a part number.
Hydraulic Hose Nozzles
Nozzles allow you to control the flow while dispensing hydraulic fluid. They shut off manually, so you’ll have to release the trigger to stop the flow. Nozzles are aluminum, which is lightweight with good corrosion resistance.
Style A has a larger spout and a higher flow rate than Style B to dispense large quantities of hydraulic fluid quickly.
Style B is UL listed. It has an angled design, which reduces hose kinking for efficient fueling.
Warning: Do not leave nozzles unattended when in use.
For technical drawings and 3-D models, click on a part number.
Spout | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Max. Flow Rate, gpm | Pipe Size | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Shut-Off Type | Specifications Met | Each | |
| A | 60 | 1 1/2 | Threaded NPT Female | 50 psi @ 72° F | -40° to 300° | 1 7/8" | 8 3/8" | Aluminum | Manual | __ | 00000000 | 0000000 |
| B | 40 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 13/16" | 6" | Aluminum | Manual | UL Listed | 0000000 | 00000 |
| B | 40 | 1 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 13/16" | 6" | Aluminum | Manual | UL Listed | 0000000 | 00000 |
Gasoline Hose Nozzles
These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles. Nozzles will shut off automatically when the tank is full or if the nozzle falls from the tank. They have a built-in check valve to reduce spillage when withdrawing the nozzle from tank. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. A plastic scuff guard protects the nozzle from damage. Attach an optional splash guard (sold separately) to protect your hands from spray. Nozzles are aluminum, which is lightweight with good corrosion resistance.
Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.
Use hold-open clip kits to replace a broken clip. Install with pliers.
For technical drawings and 3-D models, click on a part number.
Nozzles | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spout | Threaded Swivels | Replacement Hold-Open Clip Kits | |||||||||||||
| Max. Flow Rate, gpm | Pipe Size | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Shut-Off Type | Specifications Met | Each | Each | Each | |||
Nozzles | |||||||||||||||
| 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 13/16" | 6 1/2" | Aluminum | Automatic, Manual | UL Listed | 0000000 | 0000000 | 0000000 | 000000 | 000000 | 00 |
Nozzles with Three-Position Hold-Open Clip | |||||||||||||||
| 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 13/16" | 6 1/2" | Aluminum | Automatic, Manual | __ | 0000000 | 000000 | 000000 | 00 | 0000000 | 000000 |
| Optional Red Splash Guard | 0000000 | Each | 000000 |