We will reply to your message within an hour.
You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.
Step on this hose and it springs back to its original shape.
Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle.
Cut the hose to your desired length and attach the fittings. You don't need any special equipment to install.
Use this conductive hose in a grounded system to eliminate static buildup. The material is blended with carbon black, which conducts static charges away from the hose walls.
The heating wire in this hose warms adhesives or paraffin wax to keep them flowing. Pair it with the matching temperature controller to set the temperature.
Yarn reinforcement gives this hose good strength under pressure.
Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.
Use this general purpose tubing with a variety of chemicals.
Made of highly chemical-resistant materials, this tubing withstands harsh chemicals such as hydrochloric acid, sodium hydroxide, and sulfuric acid.
With a diameter of 2" or larger, this tubing has the girth to handle high volumes of acids and other harsh substances.
Commonly used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle continuous bending and flexing.
With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.
Use this resilient tubing in high-temperature chemical applications up to 400° F.
Hard walls give this tubing excellent strength in high-pressure and vacuum applications.
Ultraviolet light won’t cause this tubing to degrade or deteriorate.
The corrugated design allows this tubing to extend and compress just like an accordion.
Run chemicals through this tubing at temperatures between -100° F and 500° F.
Not only can this tubing handle temperatures between -450° F and 500° F, it also has a convoluted spiral design for good flexibility and smooth flow.
You don’t have to worry about this tubing cracking due to stress or impact—even over a wide range of temperatures.
A lightweight alternative to stainless steel, this tubing can handle extreme-pressure applications up to 1,000 psi.
This durable tubing has the best abrasion and wear resistance of all our hard tubing for chemicals.
Keep your work site safe and clutter free—this coiled tubing extends when you need it and retracts out of the way when you don't.
This tubing can withstand high-temperature chemical applications up to 400° F.
An FEP liner gives this tubing better chemical resistance than any of our other firm tubing. It also provides a smooth interior for easy cleaning unrestricted flow.
Cold temperatures pose no problems for this tubing—it stays strong and flexible, even when temperatures drop to -100° F.
Made from TPE plastic, this tubing doesn’t contain plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through.
Made of Nomex fabric, this sleeving has excellent tear resistance and better abrasion resistance than nylon sleeving.
Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.
Use this PTFE sleeving in applications where temperatures reach up to 500° F.
Made of PVC, this sleeving resists chemicals, oil, and acids.
Protect cable, hose, and pipe in high temperature environments—this sleeving withstands temperatures over 450° F. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.
Coated with PVC, this polyester sleeving resists chemicals and solvents. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.
Made of PTFE, this sleeving has excellent resistance to chemicals and acids. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.
Often used to protect wire, cable, and hose in robotics and other automated applications, this highly flexible sleeving withstands continuous motion without tearing or fraying.
Maintain a supply of tubing in a variety of sizes that withstand abrasion, moisture, and chemicals.
With excellent resistance to tears and cuts, this tubing withstands demanding use.
Often used to bundle batteries, capacitors, and other electronics, this tubing tightly conforms to objects, similar to shrink wrap. It has excellent resistance to chemicals, oil, and acids.
Made of PVC, this tubing resists chemicals, oil, and solvents. The adhesive lining creates a water-resistant seal when heated.
Often used in automated applications such as robotics, this highly flexible silicone rubber tubing withstands continuous motion without cracking and tearing. It resists abrasion and can be dragged over rough surfaces without damage.
Use this tubing in applications where temperatures reach up to 500° F. It's often used to insulate electronic components.
With thin walls, this tubing shrinks faster than other high-temperature tubing. It withstands up to 500° F.
This tubing shrinks down to a quarter of its original ID, so it creates a tight seal over irregularly shaped objects. It withstands up to 500° F.
Made of PVDF, this tubing has excellent cut and abrasion resistance. It has a flame-retardant additive that resists combustion and minimizes the spread of flames.
Access connections more easily than with standard heat-shrink tubing. Make a small slit in this tubing to peel it away.
Resistant to diesel fuel, hydraulic fluid, and lubricating oil, this tubing is often used in vehicles.
This PTFE tubing withstands temperatures up to 450° F and has an inner lining that creates a water-resistant seal when heated.
Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.