Designed to withstand extreme environments, these fluoroelastomer sealants have excellent resistance to harsh chemicals. They’re non-sagging, so they won't drip from vertical and overhead surfaces.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

Wrap this tape tightly around pipe and other surfaces to seal cracks and joints without having to shut down your system.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

For quick repairs, these epoxies begin to harden in 6 minutes or less.

Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.

Seal freshly finished concrete to prevent it from drying too quickly during the curing process. These coatings also protect against mild chemicals, salts, soaps, and detergents.

These coatings are more durable than our standard coatings for concrete floors. They provide a stain-resistant finish that protects your floors from moisture, chemicals, foot traffic, and hand carts.

Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.

Also known as coal tar epoxy, these coatings are our most resistant to abrasion, chemicals, and corrosion on concrete and steel. They can be immersed in salt water and fresh water.

These coatings are used in enclosed, high-traffic spaces. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.

Protect brass, bronze, copper, and silver from moisture, chemicals, oxidation, and abrasion.

The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

These thin primers penetrate deeply into concrete floors to create a hard surface that can then be coated with any urethane or epoxy coating.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.