These pumps have a totally enclosed fan-cooled (TEFC) motor for use in dusty, dirty, and damp environments. The impeller is turned with magnets to eliminate seal wear and leakage for a long service life.

These pumps can be used to move water and lubricating oil in boiler feed systems, cooling towers, and heat exchangers.

The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Use these pumps to move water and lubricating oil in boiler feed systems, cooling towers, and heat exchangers

Use less electricity to achieve the same flow rates as other circulation pumps.

A sealless construction means these pumps have few moving parts that can fail and shorten service life. The intake can be completely submerged in liquid.

The durable motor and impeller can handle dirty coolant and machine lubricants with solids up to 1/4" diameter. These pumps have an intake that can be completely submerged in liquid.

The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Install these pumps up to 20 ft. above your liquid source to drain underground tanks and process wastewater.

A high-horsepower motor handles four times the flow and twice the pressure of other inline circulation pumps. Install these pumps directly in your pipeline for applications such as hot-water circulation and hydronic heating and cooling.

A 316 stainless steel housing sealed with fluoroelastomer resists mild chemicals and acids, such as coolant, oil, and phosphoric acid.

These pumps have the best chemical resistance of all our circulation pumps. Instead of a shaft seal, they use magnets to turn the impeller, reducing wear and leakage.

Keep your circulation pump in working order by replacing broken or worn parts.

Commonly used in food, beverage, and dairy processing, these pumps are 3-A certified to meet sanitary design standards.

Extend the service life of your pump by mounting it to a baseplate. These heavy duty plates minimize vibration and raise the pump off the floor, preventing damage to the motor from flooding or spills.

Rated for continuous use, these pumps are often used to move caustics such as antifreeze and salt water. Mount them in any position, even upside down. Also known as diaphragm pumps, they are typically used for low-flow spraying, draining, and washdown applications.

Designed to fit into small equipment, these pumps have miniature gears and a subfractional horsepower motor for low-flow applications.

A high-horsepower motor moves oil with a viscosity similar to SAE 60 motor oil. Also known as gear pumps, these produce a smooth flow of liquid to lubricate equipment and blend oils.

With all PTFE wetted parts, these pumps offer the best chemical resistance of all our air-powered transfer pumps and can handle solvents and petroleum-based fluids that PVDF pumps can’t.

A Buna-N diaphragm stands up to lubricating oil such as hydraulic and motor oil. These pumps are designed to handle thick sludges and slurries.

The Santoprene diaphragm resists cracking for a long service life and stands up to water and chemicals such as ammonium hydroxide. These pumps have a rugged aluminum housing for moving large volumes of thick sludges and slurries in demanding environments.

A neoprene diaphragm resists oil and chemicals such as isopropyl alcohol and deionized water. These pumps have a rugged aluminum housing for moving large volumes of thick sludges and slurries in demanding environments.

Small enough to fit in the palm of your hand, these pumps transfer water, detergents, and chemicals.

UL listed for pumping petroleum products and rated for use with flammable liquids, these pumps move diesel fuel, gasoline, kerosene, and mineral spirits. They can be grounded to dissipate static electricity.

The fluoroelastomer diaphragm withstands higher temperatures than a neoprene diaphragm and has better resistance to fuel such as gasoline and kerosene. These pumps have large internal pathways and check valves with flaps to accommodate thick sewage, abrasive slurries, and industrial waste with large solids that would damage standard air-powered transfer pumps.

Made of FDA listed materials for use with food and beverage, these pumps have a sanitary quick-clamp fluid connection for easy cleaning. They are commonly used to move sauces, concentrates, and other thick liquids with solids.

Also known as sprayer pumps, these provide a smooth, uniform flow for agricultural spraying, soap dispensing, and chemical transferring.

These pumps have a bronze housing and gears for use with water. Also known as gear pumps, they produce a smooth flow of liquid for water delivery.

Also known as centrifugal pumps, these send a high flow of liquid through a pipeline or a closed circuit. They're often used in heating and cooling applications, as well as for tank filling and emptying.

These pumps have a selectable flow rate, so you can adjust flow for different dispensing applications. A lever handle maximizes output with each stroke for low-effort dispensing.

Rotate the handle to dispense a continuous flow of liquid.

A 316 stainless steel housing makes these pumps resistant to coolants such as ethylene glycol.

Extract water from valve boxes, meter pits, and other small spaces.

Use these pumps to move lubricating oil, such as hydraulic and motor oil.

For low-effort dispensing, these pumps have a lever handle that maximizes output with each stroke. Use them to pump lubricating oil, such as motor oil.

Remove liquid from hard‐to‐reach areas with a long, flexible intake tube that extends into deep and hard‐to-access tanks.

Eliminate leaks and waste with a faucet-style nondrip nozzle that quickly starts and stops flow.

A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps.

For low‐effort dispensing, a lever handle maximizes output with each stroke. The handle delivers fluid on both the forward and backward strokes to quickly move drum contents.

Since these pumps use suction to draw liquid out of your container, they continue dispensing once you get them started.

A filter/lubricator ensures efficiency and reduces wear on the pump. Often used with hydraulic oil and motor oil in addition to acidic and alkaline liquids, these pumps have a nonsparking motor for use in applications where electricity is unavailable or dangerous.

These pumps have a motor that is rated for IEC Zone 1, Groups IIB and IIA; and IEC Zone 21, Groups IIIC, IIIB, and IIIA hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone, xylene, and mineral spirits.

Transfer lubricating oil such as hydraulic and motor oil with these pumps. They handle nearly twice the amount of pressure as other air-powered drum pumps to move high-viscosity liquids.

The polypropylene housing provides good resistance to caustics such as ammonia, electropolishing solutions, and detergents and cleaning fluids.

Use these pumps to move lubricating oil such as hydraulic and motor oil.

These pumps are designed for use in food and beverage applications.

These pumps quickly empty drum contents by moving 48 gallons of liquid per minute. Their electric motors are UL listed for use in environments with flammable gases and combustible dust.

Designed to move 40 gallons of liquid per minute, these pumps quickly empty drum contents.

Including nozzles and connectors, these pumps come with everything you need to start pumping.

These pumps are rated for fuel such as gasoline, kerosene, and diesel fuel.

A nozzle and hose allow you to dispense directly into your container. For on-site diesel fuel dispensing at construction sites, on boats, and in other environments without electrical hookups, attach these portable pumps to any 12-volt battery.

Operating on a 12-volt battery, use these pumps to transfer and drain fuel such as gasoline, diesel fuel, and kerosene.

Made of PVDF components, these pumps resist harsh chemicals such as hydrochloric acid and sulfuric acid. They have a foot pedal for hands-free operation.

Install these pumps in a panel cutout. Often used in food and beverage, pharmaceutical, and lab applications, they dispense small amounts of liquid at a set rate.

Automatically control output from a distance using 4‐20 mA or external-pulse signals. These pumps meter a consistent amount of liquid within ±2% of the maximum flow.

Rated for liquids with a viscosity up to 5,000 centipoise, these pumps can be used with thick chemicals such as electropolishing solutions.

An adjustment dial with a locking lever allows for easy flow control. Also known as diaphragm metering pumps, these can be used with pressures up to four times higher than standard pumps for chemicals.

With a footprint that's only a few inches in any direction, these pumps fit into compact systems to dispense small amounts of acids, cleaning fluids, and other chemicals. They're often used in sterilization, photochemical, and water treatment systems.

Automatically control output from a distance using variety of analog and digital signals, including 4-20mA and external pulse signals.

Commonly used in mining, wastewater treatment, and other systems that require large-diameter hose, these pumps have flanged hose connections and large diameter tubing.

Use these pumps in applications such as degassing and servicing refrigeration and freezer systems.

Achieve vacuum levels up to 1 x 10 ^-12 torr with these ultra-high-vacuum pumps.

Install these pumps right in your line and engage the lever handle to start pumping.

Dispense a sample many times without refilling your pipettor. No need to autoclave these tips before first use—they’re cleaned and bagged to prevent contamination.

Attach these tips to the end of your pipettor to transfer small amounts of liquid.

Fill syringes quickly without the mess—these tanks use compressed air to push viscous liquid into a syringe. They hold up to a gallon of material, so you can fill many syringes one after another.

Dispense multiple samples with a single press of a button. These pipettors have a capacity 10 times larger than that of our manual repeat dispensing pipettors.

Switch between transferring liquids, mixing samples, and separating mixtures with the touch of a button. Compared to manual pipettors, these pipettors dispense using a motor to improve accuracy and reduce fatigue.

Fill eight or more reservoirs with the same, precise amount of liquid in one go. Using air displacement, each channel on these pipettors draws or dispenses a set volume when you press the plunger.