Test different water-chemistry measurements in dirty, wet conditions. Often used in pools and spas, all of these meters are for use with clean liquids. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a calibration solution (not included) and the calibration button to maintain accuracy.

IP57 meters are protected from dust and temporary submersion in liquids.

IP65 meters are protected from dust and low-pressure jets of liquids.

Chlorine, oxidation reduction potential (ORP), and pH meters come with three sensors that each take one chemistry measurement. They cannot be sold to Canada due to import regulations.

Conductivity, salinity, and total dissolved solids (TDS) meters come with one sensor that takes all three chemistry measurements.

Conductivity and total dissolved solids (TDS) meters come with one sensor that takes both chemistry measurements. You can also use them in aquaculture solutions, wastewater, and other dirty liquids.

Import regulations restrict sales to the listed areas.

Test temperature, chemical concentration, contamination, and salt levels in liquid from up to 6 ft. away, then send the results to your computer for analysis. These meters include a USB cable that transfers up to 1,000 readings. Often used to test water quality, they work on both clean and dirty liquids—from tap water to wastewater. Conductivity tests measure the concentration of salts, nutrients, chemicals, and other substances. Total dissolved solids (TDS) tests report contaminant levels. Salinity tests determine the salt levels in liquid. The sensor is made of stainless steel, so it’s durable and resists breaking. IP67 rated, these meters are dust tight and withstand temporary submersion.

To prevent inaccurate results from changing temperatures, these meters automatically standardize temperature readings at 77° F. Temperature readings appear on screen with other measurements, so you won’t have to scroll through multiple screens. A data hold function freezes the current reading on the display.

To maintain accuracy of the meters, they come with calibration solutions and have a calibration button.

These meters cannot be sold to Canada due to import regulations.

Check the pH and conductivity of water and other clean liquids with one bench-top device. This meter has automatic temperature compensation that standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration knob to maintain accuracy.

Import regulations restrict sales to the listed areas.

Check pH in harsh field conditions. These floating meters that have a housing that meets IP67 for complete resistance to dust and protection from temporary submersion. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a calibration solution and the calibration button to maintain accuracy. They do not include Calibration Solution. Meters cannot be sold to Canada due to import regulations.

Meter for clean liquids is commonly used in pools and hydroponic solutions.

Meter for dirty liquids stands up to wastewater, plating bath solutions, and other harsh liquids.

Transmit pH readings to a PC for analysis. These meters have a sensor on a 6-ft. cable for taking remote readings of water and other clean liquids. They have automatic temperature compensation that standardizes readings at 77° F to prevent inaccurate readings in fluctuating temperatures. Use the included calibration solution and calibration button to maintain accuracy.

Import regulations restrict sales to the listed areas.

Monitor pH readings from your smartphone or tablet—download the app to view data up to 160 ft. away using Bluetooth. Made of durable nonglass, the sensor resists breaking. They are for use with dirty liquids, so they stand up to petrochemical, environmental, and agricultural testing. Rated IP67, they seal out dust and withstand temporary submersion. Use a calibration solution (not included) and the calibration setting in the app to maintain accuracy.

These meters cannot be sold to Canada due to import regulations.

Don’t worry about dropping this meter in your tank when checking electrical conductivity—it floats and has a housing that meets IP67 for complete resistance to dust and protection from temporary submersion. For use with water, hydroponic solutions, and other clean liquids, this meter measures a liquid's conductivity to indicate the concentration of salts, nutrients, chemicals, and other substances. It displays temperature in addition to conductivity. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.

Import regulations restrict sales to the listed areas.

Since these meters float and have a housing that meets IP67, they won’t be damaged by temporary submersion and have complete resistance to dust. They detect total dissolved solids (TDS) in water, hydroponic solutions, and other clean liquids to determine contaminant levels. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.

Import regulations restrict sales to the listed areas.

Since this oxidation reduction potential (ORP) meter has a housing that meets IP67 for complete resistance to dust and protection from temporary submersion, it’s often used to determine a solution’s ability to break down contaminants in harsh field conditions. For use with dirty liquids containing heavy metals, sulfides, and harsh chemicals, this meter is often used for wastewater treatment. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy. Meters cannot be sold to Canada due to import regulations.

Check the oxygen levels of water and other clean liquids in harsh field conditions. This meter has a housing that meets IP57 for good resistance to dust and protection from temporary submersion. It has automatic temperature compensation that standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use distilled water and the calibration button to maintain accuracy.

Import regulations restrict sales to the listed areas.

The same controller can actuate equipment based on pH or oxidation reduction potential (ORP). Attach pH and ORP sensors (not included) and set the current measurement type with the selection switch. Controllers turn equipment on or off when the reading reaches the actuation point. They have one control relay and two alarm relays. Relays are SPDT (single pole, double throw) and can be set to turn one circuit from “off” to “on” (normally open) or from “on” to “off” (normally closed). Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures.

Controller with LED display is more visible in low-light conditions than controller with LCD display.

Turn pumps, mixers, valves, and other equipment on or off based on the conductivity of a solution. These controllers compare input from a sensor (sold separately) to a programmed actuation point and react when the reading reaches the actuation point. They’re often used in water treatment and electroplating. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures.

Controllers with mechanical relay output directly turn equipment on or off with two SPDT (single pole, double throw) relays.

Controllers with analog output send 4-20mA signals to a PLC or other receiving device (not included) to record data and control equipment.

Dip these strips into your liquid to quickly test water conditions. Strips change color to indicate the value reached; match the color of the strip to the color chart on the bottle to interpret the results.

Test for contaminants before installing water-treatment equipment such as boilers and filters. You can also check your pipes and equipment for improper chemical levels that can cause corrosion and scale buildup, shortening their life.

367-test kits include tests for six common water-quality parameters in boiler systems and cooling towers.

340-test kits include tests for monitoring municipal water, which is often treated with chlorine.

290-test kits include tests that help you monitor well water, which often contains sulfur compounds.

All the chemicals and labware you need for on-site sampling and water-quality testing.