These chucks have a ratcheting mechanism which allows for easier tightening and releasing of drill bits and other tools.

Use the included spanner wrench to tighten the chuck for up to three times the gripping torque of hand tightening.

The integral arbor is more rigid for greater accuracy than a drill chuck used with a separate arbor.

Adapt standard impact wrenches for drilling applications. These chucks mount directly onto the square-drive spindle of an impact wrench.

A ball-bearing design provides increased gripping force to keep bits from slipping, which allows these chucks to take on high-torque drilling applications. Also known as super chucks.

A gripping ring in these chucks absorbs vibration and holds drill bits tighter than standard chucks during heavy hammer-drilling operations.

Convert a power screwdriver or impact driver into a versatile drill. Also known as adapt-a-drive, these chucks have a 1/4" hex shank that fits the hex drive in most power screwdrivers and impact drivers.

The Morse taper end fits into a machine spindle and the Jacobs taper end is compatible with a Jacobs taper drill chuck.

Separate Morse taper shank cutting tools from machinery spindles and Morse taper adapters. These tools are also known as drill drifts and drift keys.

The Morse taper end fits into a machine spindle and the threaded end is compatible with a thread-mount drill chuck.

For better control when drilling small holes with a drill press or milling machine, the attachment on these arbors lets you apply light feed pressure with your fingers while the machine rotates the bit.

Use with R8 taper spindles which are most often found on manual milling machines.

One end attaches to your SDS-drive rotary hammer, and the other end attaches to a drill chuck so you can perform regular drilling and driving operations with round- and hex-shank drill bits.

No more lost keys—also known as key leashes, use these holders to secure your chuck key to your drill's power cord.

These collets tightly grip workpieces when installed into a 5C collet chuck or holder. They provide a stronger hold on small workpieces than a standard lathe chuck. Choose from collets that can grip round-, hexagon-, or square-shaped workpieces.

Install into an ER-16 collet chuck or holder to tightly grip round-shank tool bits in milling machines.

Install into an ER-20 collet chuck or holder to tightly grip round-shank tool bits in milling machines.

Install into a 100-TG collet chuck or holder to tightly grip round-shank tool bits in milling machines.

Insert into a 16C collet chuck or holder to tightly grip round workpieces. They provide a stronger hold on small workpieces than a standard lathe chuck.

Also known as emergency collets, these collets have a machinable face for boring an opening to the exact size and shape you need.

Insert into a 16C collet chuck or holder to tightly grip workpieces.

These collets tightly grip workpieces when installed into a 5C collet chuck or holder. They provide a stronger hold on small workpieces than a standard lathe chuck.

Install a 5C collet into one of these chucks to hold a workpiece for machining parallel or square edges and drilling crossholes.

Attach taps to auto-reversing tap holders for Jacobs taper shanks.

A V-groove enables these holders to grip round-shank as well as square-shank tools.

Four flat head screws lock down round-shank tools in a precision-ground bore for increased rigidity over other round-shank tool holders.

Mount any tool with a Morse taper shank to a quick-change tool post.

Also known as tap chucks, these fit into machines that have a Morse taper spindle.

Also known as scroll chucks, these are self centering—all three jaws move in unison, centering the workpiece as they close.

Hold machinable lathe chuck jaws in place during machining to make accurate cuts, ensuring the jaws will securely grip your workpiece.

Machine these jaws to fit the curves and edges of your unique workpiece for a tighter hold and more stability than standard hardened jaws.

When hand pressure is released, these wrenches automatically pop out of lathe chucks to keep users and machines safe from harm. Use them to prevent accidents that can occur when someone forgets to remove their wrench before turning on a lathe.

Secure jaws to a CNC lathe chuck with industry standard 1.5 mm × 60° serrations or wider 3 mm × 60° serrations.

Pass wires and rods through the hollow body of these vises.

Each end of the vise has a collet to hold a different tool—turn the collar to close the collets around them.

A rubber-covered body provides a comfortable grip. These vises have a rotating end cap on the handle that allows you to apply constant pressure while turning the body of the vise with your fingertips.

Squeeze the body to open the flat jaws; release to grip.

Control clamping action with air. Use 5C collets to grip and release parts on milling machines and drill presses.

Use multiple fixtures to create a workholding system capable of clamping and unclamping multiple parts with the push of a button.

With a T-handle design, these wrenches are more compact than straight-handle tap wrenches but provide less leverage.

Use with a tap to thread holes by hand. These tools have long handles to provide more leverage than T-handle wrenches, but they require more space for tapping.

Also known as hand tappers, these wrenches mount to a flat surface for stability and guide the tap straight into the hole for accurate threading.

These holders work like sockets to connect taps to ratchet wrenches.

Add or replace parts such as die sets, power drives, and die head adapters on Ridgid Pipe and Conduit Threaders.

Use with Ridgid Electric Pipe and Conduit Threaders and Ridgid Hand-Held Electric Pipe and Conduit Threaders to thread pipe and conduit sizes of 2-1/2, 3, 3-1/2, and 4.

Thread, cut, and ream pipe and conduit with these machines.

Connect to a compatible ratchet or electric threader to cut external pipe and conduit threads.