With more than 1.5 times more teeth than a standard circular saw blade, these blades make smooth cuts across the wood grain for a finish that needs minimal sanding. Use them on wood, plywood, and particleboard. They make both straight and plunge cuts, so they can cut lumber down to size and slice through material that’s already installed.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.

Cut through hidden nails in reclaimed lumber. The carbide-tipped steel teeth on these blades are designed to handle impact as they cut across and with the grain (ripping). They bite into wood to make both straight and plunge cuts, so they can slice through material that’s already installed. Detach the center piece to expose the diamond shape of the arbor.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

No need to change blades when cutting different material—these blades cut through both metal and wood. Their carbide teeth make clean cuts in wood and burr-free cuts in metal. They’re also impact-resistant, so these blades easily slice through wood with nails in it. An aluminum coating reduces heat buildup, keeping these blades cool as you cut. This helps prevent material from burning, deforming, or gumming up your blades, and it also helps keep blades sharp. Anti-vibration vents limit shaking for accurate, stable cuts, and they also reduce cutting noise.

These blades make straight and plunge cuts. Detach the center piece to expose the diamond shape of the arbor.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make fast, clean cuts in steel sheets, angle iron, rebar, and pipe with the carbide teeth on these blades. They bite into steel to make both straight and plunge cuts, so they can slice through material that’s already installed. When choosing a blade, you'll want to keep in mind the number of teeth and the width of the cut. Choose more teeth for a smoother cut; choose fewer teeth for a faster cut and for cutting thicker materials. A narrower cut width makes faster cuts with minimal material loss; a wider cut width increases stability for straighter cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Cut steel and stainless steel without having to change blades—the ceramic/carbide blend teeth on these blades cut both. They also last five times longer than blades with carbide teeth. An aluminum coating on their body resists heat buildup to prevent these blades from dulling and getting gummed up with metal shards. Because they stay cool, they won’t accidentally harden the edge that you’re cutting. Anti-vibration vents limit shaking, so your cuts are straight and accurate. The vents further reduce heat buildup to prevent dulling. Use these blades to make both straight and plunge cuts. They’re great for cutting steel channel to size and cutting material that’s already installed.

Choose blades with more teeth for a smoother cut; choose blades with fewer teeth for a faster cut and for cutting thicker materials.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.

A razor-sharp knife edge minimizes dust and makes quick, clean cuts through foam sheets such as expanded polystyrene insulation and extruded polystyrene.

A razor-sharp knife edge minimizes dust and makes quick, clean cuts through foam sheets such as expanded polystyrene insulation and extruded polystyrene. Detach the center piece to expose the diamond shape of the arbor.

Use these blades for occasional cutting. Choose blades with more teeth for cutting across the grain; choose blades with fewer teeth for cutting with the grain (ripping). For blades with a round/diamond arbor, detach the center piece to expose the diamond shape.

The edge of the blade is segmented to cut faster than a continuous edge. These blades have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For blades with a round/diamond arbor, detach the center piece to expose the diamond shape.

A continuous diamond-grit edge on these blades produces smooth cuts in hard, abrasive materials such as masonry, stone, asphalt, and concrete. Use dry or with water or coolant (not included).

A continuous edge on these blades produces smooth cuts. They have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For blades with a round/diamond arbor, detach the center piece to expose the diamond shape.

A continuous edge on these blades produces smooth cuts. They have diamond grit that lasts up to three times longer than the grit on other blades for masonry, stone, and concrete in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included).

Blades come with a reducer bushing to adjust the arbor diameter. Detach the center piece on the round/diamond arbor to expose the diamond shape.

The edge of the blade is segmented to cut faster than a continuous edge. These blades have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included).

For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.

A continuous edge on these blades produces smooth cuts. It's coated in diamond grit to cut hard, abrasive materials such as masonry, stone, asphalt, and concrete. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.

The edge of the blade is segmented to cut faster than a continuous edge. It's coated in diamond grit to cut hard, abrasive materials such as masonry, stone, asphalt, and concrete. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.

The edge of the blade is segmented to cut faster than a continuous edge. It's coated in diamond grit to cut hard, abrasive materials such as masonry, stone, asphalt, and concrete. Use dry or with water or coolant (not included).

For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.