Make clean cuts in rubber and plastic hose with the scalloped knife edge on these blades.

Teeth are carbide tipped and designed to push chips away from the blade to prevent clogging and produce smooth cuts in aluminum sheets, tubing, and T-slotted framing. Choose blades with more teeth for a smoother cut. Blades with a narrower width of cut make faster cuts with less material loss.

The edge of the blade is segmented to cut faster than a continuous edge. These blades have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For blades with a round/diamond arbor, detach the center piece to expose the diamond shape.

A continuous edge on these blades produces smooth cuts. They have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For blades with a round/diamond arbor, detach the center piece to expose the diamond shape.

Make fast, clean cuts in steel sheets, angle iron, rebar, and pipe with the carbide teeth on these blades. They bite into steel to make both straight and plunge cuts, so they can slice through material that’s already installed. When choosing a blade, you'll want to keep in mind the number of teeth and the width of the cut. Choose more teeth for a smoother cut; choose fewer teeth for a faster cut and for cutting thicker materials. A narrower cut width makes faster cuts with minimal material loss; a wider cut width increases stability for straighter cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Cut stainless steel sheets, pipe, tubing, and grating with teeth made of impact-resistant carbide. Choose blades with more teeth for a smoother cut.

Cut steel and stainless steel without having to change blades—the ceramic/carbide blend teeth on these blades cut both. They also last five times longer than blades with carbide teeth. An aluminum coating on their body resists heat buildup to prevent these blades from dulling and getting gummed up with metal shards. Because they stay cool, they won’t accidentally harden the edge that you’re cutting. Anti-vibration vents limit shaking, so your cuts are straight and accurate. The vents further reduce heat buildup to prevent dulling. Use these blades to make both straight and plunge cuts. They’re great for cutting steel channel to size and cutting material that’s already installed.

Choose blades with more teeth for a smoother cut; choose blades with fewer teeth for a faster cut and for cutting thicker materials.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.

A continuous edge coated in diamond grit makes fast, smooth cuts in stone and ceramic tile. Blades with multiple arbor diameters come with a reducer bushing.

The edge of the blade is segmented to cut faster than a continuous edge. It's coated in diamond grit to cut hard, abrasive materials such as masonry, stone, asphalt, and concrete. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.

A continuous edge on these blades produces smooth cuts. It's coated in diamond grit to cut hard, abrasive materials such as masonry, stone, asphalt, and concrete. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.

Diamond grit bonded to a segmented edge cuts through hard metal such as cast iron and steel. Use dry or with water or coolant (not included). All blades come with a reducer bushing to adjust the arbor diameter. Blades with a narrower width of cut make faster cuts with less material loss.

Use these blades with water or coolant (not included) to produce smoother cuts in stone and ceramic tile than dry-cutting blades. They're also for use on glass. They have a continuous edge coated in diamond grit. Blades with multiple arbor diameters come with a reducer bushing.