Electric Circular Saws for Metal
Make long, straight cuts into steel sheets, structural framing, and other metal components. These handheld saws are good for longer cuts than chop saws. At a low speed, they’ll cut without burrs or excessive heat—no coolant required. They’ll also produce fewer sparks than saws with abrasive wheels. To keep your workspace clean, all can either blow metal chips out of the way or collect them during cutting.
Evolution and Fein 6 99 08 120 00 1 saws have a high-torque motor that powers the blade more efficiently than our other saws. This makes them the best choice for cutting hard, thick metal.
Saws with a brake stop rotating soon after you release the trigger, so you can quickly reposition your workpiece and make the next cut.
| Manufacturer Model Number | Current | For Blade Dia. | For Arbor Hole Size | No-Load Speed, rpm | Max. Cutting Dp. | Max. Bevel Cut Angle (Tilt Direction) | Wt., lbs. | Features | Blade Location | Includes | Each | |
Evolution | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S185CCSL | 15 A @ 120 V AC | 7 1/4" | 20 mm | 3,700 | 2 1/2" | 45° (Right) | 12 | Chip Blower | Right Side | One 7 1/4" Dia. Carbide-Tipped Steel Blade for Steel (40 Teeth) | 000000 | 0000000 |
Fein Power Tools | ||||||||||||
| 6 99 08 120 00 0 | 13 A @ 120 V AC | 7 1/4" | 20 mm | 3,800 | 2 1/2" | 45° (Right) | 15 | Chip Collector, Brake, Laser Guide | Right Side | One 7 1/4" Dia. Carbide-Tipped Steel Blade for Steel (36 Teeth); Plastic Case | 00000000 | 000000 |
Cordless Circular Saws for Metal
Make long, straight cuts in metal anywhere on your site. These saws cut with the same power as an electric saw but don’t need to be near an outlet. They’re often used to trim panels and structural framing to size. Because they use a low speed, they make a smooth, burr-free cut and don’t require coolant. Compared to saws that use abrasive wheels to cut metal, these saws generate fewer sparks, too.
Some tools include rechargeable batteries. For other tools, batteries and chargers are sold separately.
Evolution saws cut through wood and plastic in addition to metal. They protect against accidental starts since you have to pull the safety switch at the same time as the trigger. When you release the trigger, the brake stops the blade to let you quickly reposition your workpiece and move to your next cut. Connect the chip port to a dust collector to keep your workspace clean and safe.
Fein saws have a variable-speed dial, which allows you to fine-tune their speed for the material and thickness you’re cutting. The brake stops the blade when you release the trigger, so you can quickly reposition your workpiece and move to your next cut. A chip collector captures metal shards and chips, so your workspace stays clean and safe. These saws are compatible with Bosch batteries.
Batteries | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model No. | For Blade Dia. | For Arbor Hole Size | No-Load Speed, rpm | No. of Speeds | Max. Cutting Dp. | Max. Bevel Cut Angle | Wt., lbs. | Included | No. Required | No. Included | Battery Charger Included | Blade Included | Blade Location | Features | Each | |
DeWalt—20V DC | ||||||||||||||||
| DCS373P2 | 5 1/2" | 20 mm | 3,700 | 1 | 1 11/16" | 45° | 8.3 | Yes | 1 | 2 | Yes | Yes | Left Side | LED Light | 00000000 | 0000000 |
Evolution—18V DC | ||||||||||||||||
| R185CCSX-Li | 7 1/4" | 20 mm | 3,750 | 1 | 2 1/2" | 45° | 8.4 | Yes | 1 | 1 | Yes | Yes | Right Side | Brake, Chip Collection Port, Safety Switch | 000000000 | 000000 |
Fein Power Tools—18V DC | ||||||||||||||||
| 7 136 04 61 09 0 | 6" | 20 mm | 1,300-2,800 | Variable | 2 1/4" | __ | 9.3 | No | 1 | __ | No | Yes | Right Side | Brake, Chip Collector, LED Light | 000000000 | 000000 |
| 7 136 04 62 09 0 | 6" | 20 mm | 1,300-2,800 | Variable | 2 1/4" | __ | 9.3 | Yes | 1 | 1 | Yes | Yes | Right Side | Brake, Chip Collector, LED Light | 000000000 | 000000 |
Milwaukee—18V DC | ||||||||||||||||
| 2782-20 | 5 3/8" | 20 mm | 3,900 | 1 | 2" | __ | 4.8 | No | 1 | __ | No | Yes | Right Side | LED Light | 000000000 | 000000 |
Air-Powered Circular Saws
With more consistent power than electric and battery-powered saws, these saws make smooth cuts through tough material without stalling out. They cut wood, metal, and plastic, so you can switch jobs without switching saws. A safety lock button protects you from accidental starts, and a built-in chip collector keeps your space clean and safe.
Air Inlet | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power, hp | Average Air Consumption | For Blade Dia. | For Arbor Hole Size | No-Load Speed, rpm | Max. Cutting Dp. | Max. Bevel Cut Angle | Wt., lbs. | Pipe Size  | Thread Type | Gender | For Air Hose ID | Exhaust Location | Blade Included | Blade Location | Features | Each | |
| 1.7 | 50 cfm @ 90 psi | 7 1/4" | 5/8", 20 mm | 3,200 | 2 1/2" | 45° | 19 | 1/2 | NPT | Female | 1/2" | Front | No | Right Side | Chip Collector, Safety Switch | 0000000 | 000000000 |
Electric Track Saws
Take these saws anywhere and use the included track to make perfectly straight, splinter-free cuts in wood. They are also called plunge saws because they can make plunge cuts. Control the speed of the blade with a dial; use slower speeds for hard wood and faster speeds for soft wood. A second dial lets you have precise control over the depth of the cut. These saws also have a riving knife that reduces kickback by keeping the cut material from pinching the blade. Connect a vacuum hose to the dust port to collect up to 90% of the sawdust created so you can keep your work area clean. Optional track clamps hold the track to your workpiece.
| Manufacturer | Manufacturer Model No. | Current | For Arbor Hole Size | For Blade Dia. | No-Load Speed, rpm | Max. Cutting Depth | Wt., lbs. | Includes | Features | Each | |
| DeWalt | DWS520CK | 12 A @ 120 V AC | 20 mm | 6 1/2" | 1,750-4,000 | 2 1/8" | 11.5 | One 6 1/2" Dia. Carbide-Tipped Steel Blade for Wood (48 Teeth); 59" Lg. Track; 102" Lg. Track | Speed Control, Depth Control, Kickback Reduction, Dust Extraction Port | 000000 | 0000000 |
| Manufacturer | No. of Clamps | Each | |
| DeWalt | 2 | 0000000 | 000000 |
Cordless Track Saws
Make straight, splinter-free cuts in wood anywhere in your facility. Also known as plunge saws, they mount to a precision track (sold separately) and move along the track for a straight cut. They’re more portable than a table saw and deliver the same power as an electric track saw without requiring you to be near an outlet. A high-voltage rechargeable battery gives them enough power to maintain speed while cutting through thick and hard materials. These saws have a brushless motor that optimizes battery usage, so they run longer on a single charge. It also enhances longevity—they run cool and have few moving parts that require maintenance.
These saws feature two control dials: one for speed and one for depth. Slow the blade down for cutting hard woods or speed it up for soft woods. You can also raise and lower the blade to cut at a precise depth. To reduce kickbacks, they have a riving knife, a small piece of metal behind the blade. If the material starts to kick back, small teeth grip and dig into it. Connect the dust port to a dust collector to suck up the sawdust generated by your cuts.
Some saws include rechargeable batteries. For saws where they’re not included, see DeWalt batteries and chargers and Milwaukee batteries and chargers.
An optional track connector allows you to join multiple tracks together for longer cuts. Optional track clamps hold the track to your workpiece.
Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model No. | Motor Type | For Blade Dia. | For Arbor Hole Size | No-Load Speed, rpm | Max. Cutting Dp. | Max. Bevel Cut Angle | Wd. | Dp. | Ht. | Wt., lbs. | Batteries Included | Battery Charger Included | Includes | Features | Each | |
DeWalt—60V DC | ||||||||||||||||
| DCS520B | Brushless | 6 1/2" | 20 mm | 2,500-4,200 | 2 1/8" | 47° | 17 1/4" | 13 1/4" | 11 7/8" | 12.5 | No | No | One 6 1/2" Dia. Carbide-Tipped Steel Blade for Wood (42 Teeth); One L-Key | Speed Control, Depth Control, Kickback Reduction, Dust Extraction Port | 00000000 | 0000000 |
| DCS520T1 | Brushless | 6 1/2" | 20 mm | 2,500-4,200 | 2 1/8" | 47° | 17 1/4" | 13 1/4" | 11 7/8" | 12.5 | Yes | Yes | One 6 1/2" Dia. Carbide-Tipped Steel Blade for Wood (42 Teeth); One L-Key; Plastic Case | Speed Control, Depth Control, Kickback Reduction, Dust Extraction Port | 00000000 | 000000 |
Milwaukee—18V DC | ||||||||||||||||
| 2831-20 | Brushless | 6 1/2" | 20 mm | 2,500-5,600 | 2 1/4" | 45° | 8 3/4" | 14 1/4" | 10 3/4" | 9 | No | No | __ | Speed Control, Depth Control, Kickback Reduction, Dust Extraction Port | 00000000 | 000000 |
| 2831-21 | Brushless | 6 1/2" | 20 mm | 2,500-5,600 | 2 1/4" | 45° | 8 3/4" | 14 1/4" | 10 3/4" | 9 | Yes | Yes | Plastic Case | Speed Control, Depth Control, Kickback Reduction, Dust Extraction Port | 00000000 | 000000 |
| Manufacturer | For Track Lg. | No. of Connectors | Each | |
| Milwaukee | 31", 55", 106" | 2 | 00000000 | 000000 |
Compact Electric Bench-Top Chop Saws for Metal
These lightweight saws have a smaller wheel diameter than standard bench-top cutoff saws. They’re small and easy to move, yet powerful enough to cut through steel. They use metal blades instead of abrasive wheels for cooler, burr-free cuts with few sparks, fumes, and dust. Operate these saws at a low rpm to make quick, straight cuts in metal. A quick-release vise lets you secure and release your material quickly with the flip of a lever. Connect a dust collector or vacuum to the dust-extraction port to keep your work area clean and improve air quality.
Max. Cutting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Current | For Blade Dia. | For Arbor Hole Size | No-Load Speed, rpm | Ht. | Wd. | Max. Miter Cut Angle (Swivel Direction) | Wt., lbs. | Specifications Met | Blade Location | Includes | Features | Each | |
| 10 A @ 120 V AC | 7 1/4" | 20 mm | 4,200 | 4" | 2" | 45° (Left/Right) | 23 | CSA Certified | Right Side | One 7 1/4" Dia. Carbide-Tipped Steel Blade for Metal (40 Teeth) | Dust Extraction Port, Quick-Release Vise | 0000000 | 0000000 |