Threaded Rod Mount Clamping Hangers

Filter by

Pipe Size

Material

Mount Type

For Rigid Conduit Trade Size

For EMT Conduit Trade Size

Thread Size

Copper Tube Size

Mounting Location

Closure Method

For IMC Conduit Trade Size

Finish

Mounting Hole Diameter

Width

Construction

Weight Capacity

1,000 lb. to 1,999 lb.

2,000 lb. to 2,999 lb.

3,000 lb. to 3,999 lb.

Height

Length

Cushion Color

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Not Compliant

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Load Location

Cushion Material

428 Products

Performance

Vibration Damping

A rubber cushion reduces vibration and noise

139 products

Snug Fit

The split ring forms a complete circle for 360° support with no gaps

128 products

Performance

Stackable

Stack to organize multiple lines of pipe, tubing, and conduit

76 products

Adjustable

Fit a range of line sizes and easily adjust after installation

51 products

Clamp Pipe Hangers


Top Load with Bolt Closure	Bottom Load with Bolt Closure	Bottom Load with Snap Closure

Tightly grip pipe, tube, and conduit and hold it firmly in place. Unlike loop hangers, which cradle lines and allow for slight movement, these hangers wrap closely around lines for a rigid, secure hold.

Top Load with Bolt Closure—The solid base of the hanger cradles pipe. Attach to a strap (sold separately) to adjust the height of your hanger, or attach to an eye nut so you can mount it with threaded rod.

Bottom Load with Bolt Closure—Load from the bottom so you can add or remove material without uninstalling the hanger.

Bottom Load with Snap Closure—Faster and easier to install than bolt closures, these snap closed without any additional tools or fasteners.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture, but won't stand up to chemicals.

Galvanized Steel—These clamps won't rust in wet and outdoor environments, but they'll corrode when exposed to salt water and chemicals.

304 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.

316 Stainless Steel—Our most corrosion-resistant metal pipe hangers. These won’t degrade when exposed to harsh weather, salt water, and most chemicals.

	ID			For Conduit Trade Size						Pipe Hangers			Pipe Hangers with Bolt and Nut Included
	Inch	Metric, mm	For Pipe Size	EMT	IMC	Rigid	For Thread Size	Wt. Cap., lb.	Mounting Hole Dia.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
Top Load with Bolt Closure







				Zinc-Plated Steel

				13/16"	21	1/2	1/2	1/2	1/2	1/4"-20	270	9/32"	—	———	0	1	3033T11	00000


				1 1/16"	27	3/4	—	3/4	3/4	1/4"-20	270	9/32"	—	———	0	1	3033T12	0000
				1 5/16"	33	1	—	1	1	1/4"-20	270	9/32"	—	———	0	1	3033T13	0000
				1 11/16"	43	1 1/4	—	1 1/4	1 1/4	1/4"-20	270	9/32"	—	———	0	1	3033T14	0000
				1 7/8"	48	1 1/2	—	1 1/2	1 1/2	1/4"-20	270	9/32"	—	———	0	1	3033T15	0000
				2 3/8"	60	2	—	2	2	1/4"-20	270	9/32"	—	———	0	1	3033T16	0000
				2 7/8"	73	2 1/2	2 1/2	2 1/2	2 1/2	1/4"-20	500	9/32"	—	———	0	1	3033T17	0000
				3 1/2"	89	3	3	3	3	1/4"-20	500	9/32"	—	———	0	1	3033T18	0000
				4 1/2"	114	4	4	4	4	1/4"-20	500	9/32"	—	———	0	1	3033T21	0000
				5 9/16"	141	5	—	—	5	1/4"-20	500	9/32"	—	———	0	1	3033T32	0000
				6 5/8"	168	6	—	—	6	1/4"-20	500	9/32"	—	———	0	1	3033T33	0000




						Galvanized Steel

						7 5/8"	194	7	—	—	—	1/4"-20	320	9/32"	—	———	0	1	6538N11	0000


						8 5/8"	219	8	—	—	—	1/4"-20	320	9/32"	—	———	0	1	6538N12	0000
						10 3/4"	273	10	—	—	—	1/4"-20	320	9/32"	—	———	0	1	6538N13	0000
						12 3/4"	324	12	—	—	—	1/4"-20	320	9/32"	—	———	0	1	6538N14	00000
						14"	355	14	—	—	—	1/4"-20	320	9/32"	—	———	0	1	6538N15	00000
						16"	406	16	—	—	—	1/4"-20	320	9/32"	—	———	0	1	6538N16	00000


						Bottom Load with Bolt Closure







										Zinc-Plated Steel

										13/16"	21	1/2	1/2	1/2	1/2	1/4"-20	50	1/4"	10	3006T71	00000	10	3006T78	00000


										1 1/16"	27	3/4	—	3/4	3/4	1/4"-20	50	1/4"	10	3006T72	0000	10	3006T79	00000
										1 5/16"	33	1	—	1	1	1/4"-20	60	1/4"	10	3006T73	00000	10	3006T81	00000
										1 1/2"	38	—	1 1/4	—	—	1/4"-20	70	1/4"	10	3006T311	00000	10	3006T312	00000
										1 3/4"	44	1 1/4	1 1/2	1 1/4	1 1/4	1/4"-20	80	1/4"	10	3006T74	00000	10	3006T82	00000
										1 7/8"	48	1 1/2	—	1 1/2	1 1/2	1/4"-20	80	5/16"	10	3006T18	00000	10	3006T27	00000
										2 3/8"	60	2	—	2	2	5/16"-18	100	5/16"	10	3006T75	00000	10	3006T83	00000
										2 7/8"	73	2 1/2	2 1/2	2 1/2	2 1/2	1/4"-20	120	5/16"	10	3006T19	00000	10	3006T28	00000
										3 1/2"	89	3	3	3	3	5/16"-18	160	5/16"	5	3006T76	00000	5	3006T84	00000
										4"	102	3 1/2	3 1/2	3 1/2	3 1/2	5/16"-18	200	5/16"	5	3006T2	00000	5	3006T31	00000
										4 1/2"	114	4	4	4	4	1/2"-13	230	1/2"	2	3006T77	00000	2	3006T85	00000




	304 Stainless Steel

	13/16"										21	1/2	1/2	1/2	1/2	1/4"-20	50	1/4"	1	3006T86	0000	1	3006T51	0000


	1 1/16"	27									3/4	—	3/4	3/4	1/4"-20	50	1/4"	1	3006T87	0000	1	3006T52	0000
	1 5/16"	33	1								—	1	1	1/4"-20	60	1/4"	1	3006T88	0000	1	3006T53	0000
	1 1/2"	38	—								1 1/4	—	—	1/4"-20	70	1/4"	1	3006T313	0000	1	3006T314	0000
	1 3/4"	44	1 1/4								1 1/2	1 1/4	1 1/4	1/4"-20	80	1/4"	1	3006T89	0000	1	3006T5	0000
	1 7/8"	48	1 1/2								—	1 1/2	1 1/2	1/4"-20	80	5/16"	1	3006T32	0000	1	3006T68	0000
	2 3/8"	60	2								—	2	2	5/16"-18	100	5/16"	1	3006T91	0000	1	3006T94	0000
	2 7/8"	73	2 1/2								2 1/2	2 1/2	2 1/2	1/4"-20	120	5/16"	1	3006T33	0000	1	3006T69	00000
	3 1/2"	89	3								3	3	3	5/16"-18	160	5/16"	1	3006T92	0000	1	3006T95	00000
	4"	102	3 1/2								3 1/2	3 1/2	3 1/2	5/16"-18	200	5/16"	1	3006T48	00000	1	3006T7	00000
	4 1/2"	114	4								4	4	4	1/2"-13	230	1/2"	1	3006T93	00000	1	3006T96	00000




			316 Stainless Steel

			13/16"								21	1/2	1/2	1/2	1/2	1/4"-20	50	1/4"	1	3006T421	0000	1	3006T411	0000


			1 1/16"								27	3/4	3/4	3/4	3/4	1/4"-20	50	1/4"	1	3006T422	0000	1	3006T412	0000
			1 5/16"	33							1	1	1	1	1/4"-20	60	1/4"	1	3006T423	0000	1	3006T413	0000
			1 11/16"	43	1 1/4						1 1/4	1 1/4	1 1/4	1/4"-20	70	1/4"	1	3006T424	0000	1	3006T414	0000
			1 7/8"	48	1 1/2						1 1/2	1 1/2	1 1/2	1/4"-20	80	5/16"	1	3006T425	0000	1	3006T415	0000
			2 3/8"	60	2						2	2	2	1/4"-20	100	5/16"	1	3006T426	0000	1	3006T416	0000
			2 7/8"	73	2 1/2						2 1/2	2 1/2	2 1/2	5/16"-18	120	3/8"	1	3006T427	0000	1	3006T417	00000
			3 1/2"	89	3						3	3	3	5/16"-18	160	3/8"	1	3006T428	00000	1	3006T418	00000
			4 1/2"	114	4						4	4	4	5/16"-18	230	3/8"	1	3006T429	00000	1	3006T419	00000


			Bottom Load with Snap Closure







							Steel

							11/16"				17	3/8	3/8	3/8	3/8	1/4"-20	20	1/4"	10	3006T216	0000	—	———	0


							1 1/16"	27			1/2, 3/4	1/2, 3/4	1/2, 3/4	1/2, 3/4	1/4"-20	20	1/4"	10	3006T214	0000	—	———	0
							1 5/16"	33	1		1	1	1	1/4"-20	20	1/4"	10	3006T211	00000	—	———	0
							1 1/2"	38	1 1/4		1 1/4	1 1/4	1 1/4	1/4"-20	20	1/4"	10	3006T213	00000	—	———	0
							1 3/4"	44	1 1/2		1 1/2	1 1/2	1 1/2	1/4"-20	20	1/4"	10	3006T212	00000	—	———	0
							2 3/16"	56	2		2	2	2	1/4"-20	20	1/4"	10	3006T215	00000	—	———	0

Accessories for Pipe Hangers

Eye Nuts for Top Load Hangers

Suspend pipe hangers overhead by twisting threaded rod (not included) through the eye nut.

	Threaded Hole Dp.	Wt. Cap., lb.	Eye Dia.	Ctr. Ht.	Wd.	Ht.	Threaded Rod Included	Fasteners Req.		Each
Iron



	1/4"-20	3/8"	225	1/4"	1"	7/8"	1 3/8"	No	No	9436T029	00000

Pipe Hanger Straps for Top Load Hangers

Cut as much strap as you need. Straps are perforated with mounting holes, so you don't need to drill into them. These semi-flexible straps can be slightly bent to adjust during installation.

					Mounting Hole
	Ga.	Lg., ft.	Wd.	Thk.	Ctr.-to-Ctr.	Dia.		Each
Steel



		12	5	1 1/4"	7/64"	5/8"	3/8"	9600T51	000000


		Zinc-Plated Steel



				16	5	3/4"	1/16"	5/8"	9/32"	9600T36	00000


				16	5	7/8"	1/16"	5/8"	9/32"	9600T37	00000
				14	5	1"	5/64"	5/8"	9/32"	9600T38	00000

Vibration-Damping Clamp Pipe Hangers

The rubber cushion on these pipe hangers fits tightly around lines to reduce disruptive noise and damaging vibrations. It also protects lines from sharp edges on the hanger and prevents corrosion from metal-to-metal contact. These pipe hangers are often installed in hydraulic systems. Mount by twisting the nut onto a threaded rod.

Hinged—Combine the flexibility of a two-piece clamp with the simplicity of a one-piece clamp. These are easy to assemble, reposition, and take apart.

Two Piece—Detach the two halves and place them around pipe to install without accessing the end of your line.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture, but won't stand up to chemicals.

304 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.

	Pipe Hangers												Replacement Cushions
	ID				For Conduit Trade Size
	Inch	Metric, mm	For Pipe Size	For Copper Tube Size	EMT	IMC	Rigid	For Thread Size	Wt. Cap., lb.	Cushion Material		Each		Each
Hinged







				Zinc-Plated Steel

				9/16"	14	1/4	3/8	—	—	—	3/8"-16	180	EPDM/SBR	2615T11	00000	———	0


				11/16"	17	3/8	1/2	—	—	3/8	3/8"-16	180	EPDM/SBR	2615T12	0000	———	0
				13/16"	20	—	5/8	—	—	—	3/8"-16	180	EPDM/SBR	2615T31	0000	———	0
				7/8"	22	1/2	3/4	—	1/2	1/2	3/8"-16	180	EPDM/SBR	2615T13	0000	———	0
				1 1/16"	27	3/4	1	—	3/4	3/4	3/8"-16	180	EPDM/SBR	2615T14	0000	———	0
				1 3/8"	35	1	1 1/4	—	1	1	3/8"-16	180	EPDM/SBR	2615T15	0000	———	0
				1 11/16"	43	1 1/4	1 1/2	—	1 1/4	1 1/4	3/8"-16	180	EPDM/SBR	2615T16	0000	———	0
				1 15/16"	49	1 1/2	—	—	1 1/2	1 1/2	3/8"-16	180	EPDM/SBR	2615T17	0000	———	0
				2 3/16"	56	—	2	2	—	—	3/8"-16	180	EPDM/SBR	2615T18	0000	———	0
				2 3/8"	60	2	—	—	2	2	3/8"-16	180	EPDM/SBR	2615T19	0000	———	0
				2 5/8"	67	—	2 1/2	—	—	—	3/8"-16	300	EPDM/SBR	2615T21	0000	———	0


				2 7/8"	73	2 1/2	—	2 1/2	2 1/2	2 1/2	3/8"-16	300	EPDM/SBR	2615T22	0000	———	0
				3 1/8"	79	—	3	—	—	—	3/8"-16	300	EPDM/SBR	2615T23	0000	———	0
				3 1/2"	89	3	—	3	3	3	3/8"-16	300	EPDM/SBR	2615T24	0000	———	0
				3 15/16"	100	—	3 1/2	—	—	—	3/8"-16	300	EPDM/SBR	2615T32	0000	———	0
				4 1/8"	105	3 1/2	4	3 1/2	—	3 1/2	3/8"-16	300	EPDM/SBR	2615T25	0000	———	0
				4 1/2"	114	4	—	4	4	4	3/8"-16	300	EPDM/SBR	2615T26	0000	———	0


				Two Piece







								304 Stainless Steel

								3/4"	19	3/8	5/8	1/2	—	3/8	3/8"-16	Not Rated	Buna-N	2218T51	00000	2218T777	00000


								1"	25	—	3/4	3/4	—	—	3/8"-16	Not Rated	Buna-N	2218T52	00000	2218T776	0000
								1 1/2"	38	—	1 1/4	1 1/4	—	—	3/8"-16	Not Rated	Buna-N	2218T53	00000	2218T779	0000
								2"	51	1 1/2	—	—	1 1/2	1 1/2	3/8"-16	Not Rated	Buna-N	2218T54	00000	2218T778	0000
								2 1/2"	64	2	—	—	—	2	3/8"-16	Not Rated	Buna-N	2218T55	00000	2218T778	0000
								3"	76	2 1/2	—	2 1/2	—	2 1/2	3/8"-16	Not Rated	Buna-N	2218T56	00000	2218T778	0000
								4"	102	3 1/2	—	3 1/2	3 1/2	3 1/2	3/8"-16	Not Rated	Buna-N	2218T57	00000	2218T778	0000
								6"	152	—	—	—	—	—	3/8"-16	Not Rated	Buna-N	2218T58	00000	2218T779	0000
								8"	203	—	—	—	—	—	3/8"-16	Not Rated	Buna-N	2218T59	00000	2218T779	0000

Snug-Fit Clamp Pipe Hangers

Place pipe between the hanger halves and adjust the side bolts for a tighter fit than other pipe hangers. When closed, the split ring forms a complete circle around the pipe for 360° support with no gaps. Mount by twisting a threaded rod through the threaded hole.

Zinc-Plated Iron—Mildly corrosion resistant, so these hangers are ideal for dry or slightly humid environments.

Epoxy-Coated Iron—Resist corrosion better than zinc-plated iron.

304 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.

	ID				For Conduit Trade Size
	Inch	Metric, mm	For Pipe Size	For Copper Tube Size	EMT	IMC	Rigid	For Thread Size	Wt. Cap., lb.	Mounting Hole Dia.		Each
Iron



		11/16"	17	3/8	1/2	—	—	3/8	3/8"-16	180	3/8"	3023T67	00000


		7/8"	22	1/2	3/4	3/4	1/2	1/2	3/8"-16	180	3/8"	3023T68	0000
		1 1/16"	27	3/4	—	—	3/4	3/4	3/8"-16	180	3/8"	3023T69	0000
		1 5/16"	33	1	—	—	1	1	3/8"-16	180	3/8"	3023T71	0000
		1 11/16"	43	1 1/4	1 1/2	—	1 1/4	1 1/4	3/8"-16	180	3/8"	3023T72	0000
		1 7/8"	48	1 1/2	—	—	1 1/2	1 1/2	3/8"-16	180	3/8"	3023T73	0000
		2 3/8"	60	2	—	—	2	2	3/8"-16	180	3/8"	3023T74	00000
		2 7/8"	73	2 1/2	—	2 1/2	2 1/2	2 1/2	1/2"-13	300	1/2"	3023T15	00000
		3 1/2"	89	3	—	3	3	3	1/2"-13	300	1/2"	3023T16	00000
		4 1/2"	114	4	—	4	4	4	1/2"-13	300	1/2"	3023T48	00000


		Zinc-Plated Iron



				11/16"	17	3/8	1/2	—	—	3/8	3/8"-16	180	3/8"	3023T22	0000


				7/8"	22	1/2	3/4	3/4	1/2	1/2	3/8"-16	180	3/8"	3023T23	0000
				1 1/16"	27	3/4	—	—	3/4	3/4	3/8"-16	180	3/8"	3023T24	0000
				1 5/16"	33	1	—	—	1	1	3/8"-16	180	3/8"	3023T25	0000
				1 11/16"	43	1 1/4	1 1/2	—	1 1/4	1 1/4	3/8"-16	180	3/8"	3023T26	0000
				1 7/8"	48	1 1/2	—	—	1 1/2	1 1/2	3/8"-16	180	3/8"	3023T27	0000
				2 3/8"	60	2	—	—	2	2	3/8"-16	180	3/8"	3023T28	00000
				2 7/8"	73	2 1/2	—	2 1/2	2 1/2	2 1/2	1/2"-13	300	1/2"	3023T29	00000
				3 1/2"	89	3	—	3	3	3	1/2"-13	300	1/2"	3023T31	00000
				4 1/2"	114	4	—	4	4	4	1/2"-13	300	1/2"	3023T32	00000


				Epoxy-Coated Iron



						1/2"	12	—	3/8	—	—	—	3/8"-16	180	3/8"	3023T33	0000


						5/8"	15	—	1/2	—	—	—	3/8"-16	180	3/8"	3023T34	0000
						7/8"	22	—	3/4	—	—	—	3/8"-16	180	3/8"	3023T51	0000
						1 1/8"	28	—	1	—	—	—	3/8"-16	180	3/8"	3023T52	0000
						1 3/8"	34	—	1 1/4	—	—	—	3/8"-16	180	3/8"	3023T53	0000
						1 5/8"	41	—	1 1/2	—	1 1/4	—	3/8"-16	180	3/8"	3023T54	00000
						2 1/8"	53	—	2	—	—	—	3/8"-16	180	3/8"	3023T55	00000


						304 Stainless Steel



								11/16"	17	3/8	1/2	—	—	3/8	3/8"-16	180	3/8"	3023T81	00000


								7/8"	22	1/2	3/4	3/4	1/2	1/2	3/8"-16	180	3/8"	3023T82	00000
								1 1/16"	27	3/4	—	—	3/4	3/4	3/8"-16	180	3/8"	3023T83	00000
								1 5/16"	33	1	—	—	1	1	3/8"-16	180	3/8"	3023T84	00000
								1 11/16"	43	1 1/4	1 1/2	—	1 1/4	1 1/4	3/8"-16	180	3/8"	3023T85	00000
								1 7/8"	48	1 1/2	—	—	1 1/2	1 1/2	3/8"-16	180	3/8"	3023T86	00000
								2 3/8"	60	2	—	—	2	2	3/8"-16	180	3/8"	3023T87	00000
								2 7/8"	73	2 1/2	—	2 1/2	2 1/2	2 1/2	1/2"-13	300	1/2"	3023T88	000000
3 1/2"								89	3	—	3	3	3	1/2"-13	300	1/2"	3023T89	000000
4 1/2"	114							4	—	4	4	4	1/2"-13	300	1/2"	3023T91	000000

Weld-Mount Vibration-Damping Clamp Pipe Hangers

Weld these hangers to a rod or flat surface for a strong, secure connection, even in places with heavy vibration. The cushions damp vibration that could damage equipment or cause disruptive noise, such as in hydraulic systems.

304 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.

Buna-N Cushion—Cushions tightly grip material and won't swell, weaken, or lose elasticity when exposed to oil.

Fluoroelastomer Cushion—Grip lines tightly and stand up to chemicals such as fuels, oils, and solvents. More durable than Buna-N.

	Pipe Hangers										Replacement Cushions
	ID				For Conduit Trade Size
	Inch	Metric, mm	For Pipe Size	For Copper Tube Size	EMT	IMC	Rigid	Wt. Cap., lb.		Each		Each
304 Stainless Steel







				Buna-N Cushion

				1/2"	13	1/8	3/8	—	—	—	Not Rated	2218T22	000000	2218T78	00000


				3/4"	19	3/8	5/8	1/2	—	3/8	780	2218T1	00000	2218T777	0000
				1"	25	—	3/4	3/4	—	—	780	2218T2	00000	2218T776	0000
				1 3/8"	35	1	1 1/4	—	1	1	Not Rated	2218T23	00000	2218T778	0000
				1 1/2"	38	—	1 1/4	1 1/4	—	—	780	2218T3	00000	2218T779	0000
				1 7/8"	48	1 1/2	—	—	1 1/2	1 1/2	Not Rated	2218T24	00000	2218T778	0000
				2"	51	1 1/2	—	—	1 1/2	1 1/2	780	2218T4	00000	2218T778	0000
				2 3/8"	60	2	—	—	2	2	Not Rated	2218T25	00000	2218T778	0000
				2 1/2"	64	2	—	—	—	2	780	2218T5	00000	2218T778	0000
				2 7/8"	73	2 1/2	—	2 1/2	2 1/2	2 1/2	Not Rated	2218T26	00000	2218T778	0000
				3"	76	2 1/2	—	2 1/2	—	2 1/2	780	2218T6	00000	2218T778	0000


				3 1/2"	89	3	—	3	3	3	Not Rated	2218T27	00000	2218T779	0000
				4"	102	3 1/2	—	3 1/2	3 1/2	3 1/2	780	2218T7	00000	2218T779	0000
				4 1/2"	114	4	—	4	4	4	Not Rated	2218T28	00000	2218T779	0000
				5"	127	—	5	—	—	—	Not Rated	2218T73	00000	2218T779	0000
				6"	152	—	—	—	—	—	780	2218T71	00000	2218T779	0000
				6 5/8"	168	6	—	—	—	6	Not Rated	2218T29	00000	———	0
				8"	203	—	—	—	—	—	780	2218T72	00000	2218T779	0000
				10"	254	—	—	—	—	—	Not Rated	2218T728	000000	2218T779	0000




						Fluoroelastomer Cushion

						3/4"	19	3/8	5/8	1/2	—	3/8	Not Rated	2218T745	00000	2218T781	00000


						1"	25	—	3/4	3/4	—	—	Not Rated	2218T746	00000	2218T784	00000
						1 1/2"	38	—	1 1/4	1 1/4	—	—	Not Rated	2218T747	00000	2218T783	0000
						2"	51	1 1/2	—	—	1 1/2	1 1/2	Not Rated	2218T748	00000	2218T782	00000
						2 1/2"	64	2	—	—	—	2	Not Rated	2218T749	00000	2218T782	00000
						3"	76	2 1/2	—	2 1/2	—	2 1/2	Not Rated	2218T75	00000	2218T782	00000
						4"	102	3 1/2	—	3 1/2	3 1/2	3 1/2	Not Rated	2218T751	00000	2218T783	0000
						6"	152	—	—	—	—	—	Not Rated	2218T752	00000	2218T783	0000

Weld-Mount Clamp Pipe Hangers

Weld these hangers to a rod or flat surface for a strong, secure connection. For lines that expand and contract due to changes in temperature or pressure, choose a hanger with a plastic cushion.

Galvanized Steel—These clamps won't rust in wet and outdoor environments, but they'll corrode when exposed to salt water and chemicals.

304 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.

ABS Cushion—Withstand impacts better than polypropylene and resist scratching and indentation.

Polysulfone Cushion—Withstand higher temperatures than polypropylene and ABS plastic cushions, up to 325° F.

Polypropylene Cushion—Resist water, most acids, alcohols, and salts. They're more flexible and less impact-resistant than polysulfone at high temperatures.

	Pipe Hangers										Replacement Cushions
	ID				For Conduit Trade Size
	Inch	Metric, mm	For Pipe Size	For Copper Tube Size	EMT	IMC	Rigid	Wt. Cap., lb.		Each		Each
Galvanized Steel



		3 1/2"	89	3	—	3	3	3	3,300	2218T721	000000	———	0


		4 1/2"	114	4	—	4	4	4	3,500	2218T722	00000	———	0
		5 9/16"	141	5	—	—	—	5	3,500	2218T723	00000	———	0
		6 5/8"	168	6	—	—	—	6	4,800	2218T724	000000	———	0
		8 5/8"	219	8	—	—	—	—	4,800	2218T725	000000	———	0
		10 3/4"	273	10	—	—	—	—	6,000	2218T726	000000	———	0


		304 Stainless Steel







						ABS Cushion

						1/2"	13	1/8	3/8	—	—	—	Not Rated	2218T21	00000	2218T765	00000


						3/4"	19	3/8	5/8	1/2	—	3/8	Not Rated	2218T74	00000	2218T766	0000
						1"	25	—	3/4	3/4	—	—	780	2218T41	00000	2218T767	0000
						1 1/2"	38	—	1 1/4	1 1/4	—	—	780	2218T42	00000	2218T768	0000
						2"	51	1 1/2	—	—	1 1/2	1 1/2	780	2218T43	00000	2218T769	0000
						2 1/2"	64	2	—	—	—	2	780	2218T44	00000	2218T77	0000
						3"	76	2 1/2	—	2 1/2	—	2 1/2	780	2218T45	00000	2218T771	0000
						4"	102	3 1/2	—	3 1/2	3 1/2	3 1/2	780	2218T46	00000	2218T772	0000
						6"	152	—	—	—	—	—	780	2218T47	00000	2218T774	0000
						8"	203	—	—	—	—	—	780	2218T48	000000	2218T775	00000




								Polysulfone Cushion

								1"	25	—	3/4	3/4	—	—	Not Rated	2218T733	00000	2218T758	00000


								1 1/2"	38	—	1 1/4	1 1/4	—	—	Not Rated	2218T734	00000	2218T759	00000
								2"	51	1 1/2	—	—	1 1/2	1 1/2	Not Rated	2218T735	00000	2218T76	0000
								2 1/2"	64	2	—	—	—	2	Not Rated	2218T736	00000	2218T761	00000
								3"	76	2 1/2	—	2 1/2	—	2 1/2	Not Rated	2218T737	00000	2218T762	00000
								4"	102	3 1/2	—	3 1/2	3 1/2	3 1/2	Not Rated	2218T738	00000	2218T763	00000




										Polypropylene Cushion

										1 5/16"	33	1	1 1/4	—	1	1	Not Rated	2218T31	00000	2218T786	00000


										1 7/8"	48	1 1/2	—	—	1 1/2	1 1/2	Not Rated	2218T32	00000	2218T787	00000
										2 3/8"	60	2	—	—	2	2	Not Rated	2218T33	00000	2218T788	00000
										2 7/8"	73	2 1/2	—	2 1/2	2 1/2	2 1/2	Not Rated	2218T34	00000	2218T789	00000
										3 1/2"	89	3	—	3	3	3	Not Rated	2218T35	00000	2218T79	00000
										4 1/2"	114	4	—	4	4	4	Not Rated	2218T36	00000	2218T791	00000
										6 5/8"	168	6	—	—	—	6	Not Rated	2218T37	000000	2218T792	000000

Push-to-Close Clamp Pipe Hangers

Lock pipe, tube, and conduit into place in a single step. Press material into the open hanger, then close by hand—no tools or adjustments needed. Mount with a fastener through the unthreaded hole.

Nylon—Lightweight, nonconductive, and naturally rust resistant. The plastic won't cause corrosion on metal parts. It does swell and weaken when exposed to moisture, so these are best for dry environments.

HDPE—FDA compliant for direct contact with food. These hangers stand up to chemicals such as strong acids, bases, and solvents without swelling or losing strength. They also keep their shape in washdown environments.

Strut Channel Adapters—Attach to hangers to mount them on strut channel.

Threaded Rod Adapters—Attach to hangers to mount them on threaded rod.

	Pipe Hangers												Strut Channel Adapters			Threaded Rod Adapters
	ID					Mounting Hole
	Inch	Metric, mm	For Pipe Size	For Copper Tube Size	Wt. Cap., lb.	Dia.	Lg.	Wd.	Food Industry Std.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
Strut-Channel/Threaded-Rod/Wall Mount







				Nylon Plastic

				7/16" to 1/2"	12 to 14	1/8, 1/4	1/4, 3/8	140	—	5/16"	3/16"	—	10	30075T112	00000	1	30075T29	00000	10	30075T21	00000


				9/16" to 5/8"	15 to 17	1/4, 3/8	3/8, 1/2	150	—	5/16"	3/16"	—	10	30075T113	0000	1	30075T29	0000	10	30075T21	0000
				5/8" to 3/4"	17 to 20	3/8	1/2, 5/8	160	—	5/16"	3/16"	—	5	30075T114	0000	1	30075T29	0000	10	30075T21	0000
				3/4" to 13/16"	20 to 22	1/2	5/8, 3/4	180	—	5/16"	3/16"	—	5	30075T115	0000	1	30075T29	0000	10	30075T21	0000
				13/16" to 7/8"	22 to 23	1/2	3/4	200	—	5/16"	3/16"	—	5	30075T116	0000	1	30075T29	0000	10	30075T21	0000
				15/16" to 1 1/16"	25 to 28	3/4	—	230	—	5/16"	3/16"	—	5	30075T117	0000	1	30075T29	0000	10	30075T21	0000
				1 1/16" to 1 3/16"	28 to 31	—	1	240	—	5/16"	3/16"	—	5	30075T118	0000	1	30075T29	0000	10	30075T21	0000
				1 1/4" to 1 3/8"	32 to 36	1	1 1/4	240	3/8"	—	—	—	1	30075T119	0000	1	30075T29	0000	1	30075T24	0000
				1 3/8" to 1 1/2"	36 to 40	1	1 1/4	240	3/8"	—	—	—	1	30075T211	0000	1	30075T29	0000	1	30075T24	0000
				1 9/16" to 1 11/16"	40 to 43	1 1/4	1 1/2	240	3/8"	—	—	—	1	30075T212	0000	1	30075T29	0000	1	30075T24	0000
				1 13/16" to 2"	47 to 51	1 1/2	—	240	3/8"	—	—	—	1	30075T213	0000	1	30075T29	0000	1	30075T24	0000


				2" to 2 3/16"	51 to 56	—	2	300	3/8"	—	—	—	1	30075T214	0000	1	30075T29	0000	1	30075T24	0000
				2 5/16" to 2 1/2"	59 to 64	2	2	360	3/8"	—	—	—	1	30075T215	0000	1	30075T29	0000	1	30075T24	0000
				2 3/4" to 3 1/8"	71 to 80	2 1/2	3	460	1/2"	—	—	—	1	30075T216	0000	1	30075T31	0000	1	30075T25	0000
				3 1/8" to 3 1/2"	80 to 90	3	3	810	1/2"	—	—	—	1	30075T217	00000	1	30075T31	0000	1	30075T25	0000
				4 7/16" to 5"	113 to 127	4	—	1,300	1/2"	—	—	—	1	30075T218	00000	1	30075T31	0000	1	30075T25	0000




						HDPE Plastic

						7/16" to 1/2"	12 to 14	1/8, 1/4	1/4, 3/8	80	—	5/16"	3/16"	FDA Compliant 21 CFR 177.1520	10	30075T411	00000	1	30075T29	0000	10	30075T21	0000


						9/16" to 5/8"	15 to 17	1/4, 3/8	3/8, 1/2	90	—	5/16"	3/16"	FDA Compliant 21 CFR 177.1520	10	30075T412	00000	1	30075T29	0000	10	30075T21	0000
						5/8" to 3/4"	17 to 20	3/8	1/2, 5/8	100	—	5/16"	3/16"	FDA Compliant 21 CFR 177.1520	5	30075T413	0000	1	30075T29	0000	10	30075T21	0000
						3/4" to 13/16"	20 to 22	1/2	5/8, 3/4	100	—	5/16"	3/16"	FDA Compliant 21 CFR 177.1520	5	30075T414	0000	1	30075T29	0000	10	30075T21	0000
						13/16" to 7/8"	22 to 23	1/2	3/4	130	—	5/16"	3/16"	FDA Compliant 21 CFR 177.1520	5	30075T415	0000	1	30075T29	0000	10	30075T21	0000
						15/16" to 1 1/16"	25 to 28	3/4	—	130	—	5/16"	3/16"	FDA Compliant 21 CFR 177.1520	5	30075T416	0000	1	30075T29	0000	10	30075T21	0000
						1 1/16" to 1 3/16"	28 to 31	—	1	140	—	5/16"	3/16"	FDA Compliant 21 CFR 177.1520	5	30075T417	00000	1	30075T29	0000	10	30075T21	0000
						1 1/4" to 1 3/8"	32 to 36	1	1 1/4	160	3/8"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T418	0000	1	30075T29	0000	1	30075T24	0000
						1 3/8" to 1 1/2"	36 to 40	1	1 1/4	160	3/8"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T419	0000	1	30075T29	0000	1	30075T24	0000
						1 9/16" to 1 11/16"	40 to 43	1 1/4	1 1/2	180	3/8"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T421	0000	1	30075T29	0000	1	30075T24	0000
						1 13/16" to 2"	47 to 51	1 1/2	—	120	3/8"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T422	0000	1	30075T29	0000	1	30075T24	0000


						2" to 2 3/16"	51 to 56	—	2	190	3/8"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T423	0000	1	30075T29	0000	1	30075T24	0000
						2 5/16" to 2 1/2"	59 to 64	2	2	150	3/8"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T424	0000	1	30075T29	0000	1	30075T24	0000
						2 3/4" to 3 1/8"	71 to 80	2 1/2	3	600	1/2"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T425	0000	1	30075T31	0000	1	30075T25	0000
						3 1/8" to 3 1/2"	80 to 90	3	3	690	1/2"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T426	00000	1	30075T31	0000	1	30075T25	0000
						4 7/16" to 5"	113 to 127	4	—	1,140	1/2"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T427	00000	1	30075T31	0000	1	30075T25	0000

Spacers for Nylon Plastic Hangers

Image of Product. Front orientation. Spacers for Pipe Hangers.

Create consistent space between lines and mounting surfaces to provide extra clearance for insulation, wiring, or other components. You can also align multiple pipes at the same level when mounted on uneven surfaces.

	Wd.	Ht.	Temp., ° F	Pkg. Qty.		Pkg.
Nylon Plastic



	1 3/16"	13/16"	1 3/4"	20 to 180	5	30075T91	00000


	2"	1 3/16"	3 3/8"	20 to 180	1	30075T92	0000

Sanitary Clamp Pipe Hangers

Rounded edges, polished surfaces, and concealed threads limit bacteria growth on these hangers. Use them to hold pipe in environments with frequent washdowns, such as food and pharmaceutical plants. They resist corrosion in wet environments and stand up to frequent washdowns with harsh cleaners and sanitizers. The FDA compliant cushion is safe for direct contact with food. It fits tightly around lines to damp vibrations that cause disruptive noises or damage to equipment. It also prevents corrosion caused by metal-to-metal contact. Mount these pipe hangers by twisting a threaded rod through the threaded hole on top.

304 Stainless Steel—Often used with utility and water piping, these withstand mild chemicals and solvents and won't rust in wet environments.

316 Stainless Steel—Our most corrosion-resistant metal pipe hangers, use these around steam sterilization, aggressive sanitizers, and chemical processing.

Silicone Rubber Cushion—Withstand steam cleaning, ozone, sunlight, and oxidation.

PTFE Cushion—Withstand most chemicals and accommodate thermal expansion.

	ID				For Conduit Trade Size
	Inch	Metric, mm	For Pipe Size	For Copper Tube Size	EMT	IMC	Rigid	For Thread Size	Wt. Cap., lb.	Food Industry Std.		Each
304 Stainless Steel







				Silicone Rubber Cushion

				1/4"	6	—	—	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N11	000000


				3/8"	10	—	1/4	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N12	00000
				1/2"	13	—	3/8	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N13	00000
				9/16"	14	1/4	—	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N14	00000
				5/8"	16	—	1/2	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N15	00000
				11/16"	17	3/8	—	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N16	00000
				3/4"	19	5/8	—	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N17	00000
				13/16"	21	1/2	—	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N18	00000
				7/8"	22	—	3/4	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N19	00000
				1"	25	—	—	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N21	00000
				1 1/16"	27	3/4	—	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N22	00000


				1 1/8"	29	—	1	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N23	00000
				1 1/4"	32	—	—	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N24	00000
				1 5/16"	34	1	—	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N25	00000
				1 3/8"	35	—	1 1/4	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N26	00000
				1 1/2"	38	—	—	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N27	00000
				1 5/8"	41	—	1 1/2	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N28	00000
				1 11/16"	42	1 1/4	—	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N29	00000
				1 7/8"	48	1 1/2	—	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N31	00000
				2"	51	—	—	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N32	00000
				2 1/8"	54	—	2	—	—	—	3/8"-16	Not Rated	FDA Compliant 21 CFR 177.2600	8028N33	00000


				2 3/8"	61	2	—	—	—	—	1/2"-13	Not Rated	FDA Compliant 21 CFR 177.2600	8028N34	00000
				2 3/8"	61	2	—	—	—	—	1/2"-13	Not Rated	FDA Compliant 21 CFR 177.2600	8028N38	000000
				2 1/2"	64	—	—	—	—	—	1/2"-13	Not Rated	FDA Compliant 21 CFR 177.2600	8028N35	00000
				2 1/2"	64	—	—	—	—	—	1/2"-13	Not Rated	FDA Compliant 21 CFR 177.2600	8028N39	000000
				2 5/8"	67	—	2 1/2	—	—	—	1/2"-13	Not Rated	FDA Compliant 21 CFR 177.2600	8028N36	00000
				2 5/8"	67	—	2 1/2	—	—	—	1/2"-13	Not Rated	FDA Compliant 21 CFR 177.2600	8028N41	000000
				2 7/8"	73	2 1/2	—	—	—	—	1/2"-13	Not Rated	FDA Compliant 21 CFR 177.2600	8028N37	00000
				2 7/8"	73	2 1/2	—	—	—	—	1/2"-13	Not Rated	FDA Compliant 21 CFR 177.2600	8028N42	000000
				3"	76	—	—	—	—	—	1/2"-13	Not Rated	FDA Compliant 21 CFR 177.2600	8028N43	000000
				3 1/8"	79	—	3	—	—	—	1/2"-13	Not Rated	FDA Compliant 21 CFR 177.2600	8028N44	000000


				3 1/2"	89	3	—	—	—	—	1/2"-13	Not Rated	FDA Compliant 21 CFR 177.2600	8028N45	000000
				4"	102	—	—	—	—	—	1/2"-13	Not Rated	FDA Compliant 21 CFR 177.2600	8028N46	000000
				4 1/8"	105	—	4	—	—	—	1/2"-13	Not Rated	FDA Compliant 21 CFR 177.2600	8028N47	000000
				4 1/2"	114	4	—	—	—	—	1/2"-13	Not Rated	FDA Compliant 21 CFR 177.2600	8028N48	000000


				316 Stainless Steel







								Silicone Rubber Cushion

1/4"								6	—	—	—	—	—	3/8"-16	400	FDA Compliant 21 CFR 177.2600	8831T31	00000


3/8"	10							—	1/4	—	—	—	3/8"-16	400	FDA Compliant 21 CFR 177.2600	8831T32	00000
1/2"	13							1/8	3/8	—	—	—	3/8"-16	400	FDA Compliant 21 CFR 177.2600	8831T33	00000
3/4"	19	3/8						5/8	1/2	—	3/8	3/8"-16	400	FDA Compliant 21 CFR 177.2600	8831T34	00000
1"	25	—	3/4					3/4	—	—	3/8"-16	400	FDA Compliant 21 CFR 177.2600	8831T35	00000
1 1/4"	32	—	1					1	—	—	3/8"-16	400	FDA Compliant 21 CFR 177.2600	8831T36	00000
1 1/2"	38	—	1 1/4					1 1/4	—	—	3/8"-16	600	FDA Compliant 21 CFR 177.2600	8831T37	00000
2"	51	1 1/2	—					—	1 1/2	1 1/2	3/8"-16	600	FDA Compliant 21 CFR 177.2600	8831T38	00000
2 1/2"	64	2	—					—	—	2	1/2"-13	600	FDA Compliant 21 CFR 177.2600	8831T39	000000
3"	76	2 1/2	—					2 1/2	—	2 1/2	1/2"-13	600	FDA Compliant 21 CFR 177.2600	8831T41	000000
4"	102	3 1/2	—					3 1/2	3 1/2	3 1/2	5/8"-11	1,000	FDA Compliant 21 CFR 177.2600	8831T42	000000


6"	152	—	—					—	—	—	3/4"-10	2,000	FDA Compliant 21 CFR 177.2600	8831T43	000000




		PTFE Cushion

		1/2"	13					1/8	3/8	—	—	—	3/8"-16	400	FDA Compliant 21 CFR 177.2600	8831T46	00000


		3/4"	19					3/8	5/8	1/2	—	3/8	3/8"-16	400	FDA Compliant 21 CFR 177.2600	8831T47	00000
		1"	25					—	3/4	3/4	—	—	3/8"-16	400	FDA Compliant 21 CFR 177.2600	8831T48	00000
		1 9/16"	40					—	1 1/4	1 1/4	—	—	3/8"-16	600	FDA Compliant 21 CFR 177.2600	8831T62	000000
		2"	51					1 1/2	—	—	1 1/2	1 1/2	3/8"-16	600	FDA Compliant 21 CFR 177.2600	8831T63	00000
		2 1/2"	64					2	—	—	—	2	1/2"-13	600	FDA Compliant 21 CFR 177.2600	8831T64	000000
		3"	76					2 1/2	—	2 1/2	—	2 1/2	1/2"-13	600	FDA Compliant 21 CFR 177.2600	8831T65	000000
		4"	102					3 1/2	—	3 1/2	3 1/2	3 1/2	5/8"-11	1,000	FDA Compliant 21 CFR 177.2600	8831T66	000000

Adjustable Clamp Pipe Hangers

Fit a range of line sizes without any cutting, then easily adjust after they're installed. Feed the wire rope through the hanger until it's the size you need. The hanger clicks as you pull the wire so you know it's locked in place, just like a cable tie. Press the quick-release key to loosen the hanger, such as to add insulation, or to remove the hanger and install it elsewhere.

	ID
	Inch	Metric, mm	For Pipe Size	For Thread Size	Wt. Cap., lb.	Cushion Material		Each
Zinc



		7/8" to 6 5/8"	22 to 168	1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4, 5, 6	3/8"-16	170	EPDM	6326N21	00000

Quick-Mount Push-to-Close Clamp Pipe Hangers


Threaded-Rod Mount	Strut-Channel/Threaded-Rod Mount

Install and lock your line into place faster than any other hanger we sell. Snap the hanger onto a threaded rod, then press your line into the open hanger and close by hand without extra tools or adjustments.

Strut-Channel Mount—These hangers also connect to strut channel without additional fasteners.

	ID
	Inch	Metric, mm	For Pipe Size	For Copper Tube Size	For Thread Size	For Strut Channel Wd.	Wt. Cap., lb.		Each
Threaded-Rod Mount







				Nylon Plastic

				3/4"	19	3/8	5/8	3/8"-16	—	150	3945T71	00000


				1"	25	—	3/4	3/8"-16	—	150	3945T73	0000
				1 1/4"	32	—	1	3/8"-16	—	150	3945T75	0000
				1 1/2"	38	—	1 1/4	3/8"-16	—	150	3945T77	0000
				2"	51	1 1/2	—	3/8"-16	—	150	3945T79	0000


				Strut-Channel/Threaded-Rod Mount







								Nylon Plastic

								1/2" to 5/8"	12 to 16	1/4	3/8, 1/2	3/8"-16	1 5/8"	170	3166T41	0000


								11/16" to 3/4"	17 to 20	3/8	5/8	3/8"-16	1 5/8"	190	3166T42	0000
								13/16" to 15/16"	21 to 24	1/2	3/4	3/8"-16	1 5/8"	210	3166T43	0000
								1" to 1 1/8"	25 to 29	3/4	1	3/8"-16	1 5/8"	310	3166T44	0000
								1 3/16" to 1 5/16"	30 to 34	1	—	3/8"-16	1 5/8"	320	3166T45	0000
								1 5/8" to 1 11/16"	40 to 44	1 1/4	1 1/2	3/8"-16	1 5/8"	360	3166T46	0000
								1 7/8" to 2 1/8"	48 to 54	1 1/2	2	3/8"-16	1 5/8"	380	3166T47	0000
								2 1/4" to 2 7/16"	56 to 63	2	—	3/8"-16	1 5/8"	410	3166T48	0000
								2 5/8" to 3"	66 to 76	2 1/2	2 1/2	3/8"-16	1 5/8"	500	3166T49	0000
								3 1/8" to 3 5/8"	79 to 93	3	3, 3 1/2	3/8"-16	1 5/8"	600	3166T51	0000
								4" to 4 1/2"	101 to 115	3 1/2, 4	4	3/8"-16	1 5/8"	950	3166T52	00000

Stackable Vibration-Damping Clamp Pipe Hangers

Shown

Connected

End Clamps

Stacking

Clamps

Stack these pipe hangers to organize multiple lines of pipe, tubing, and conduit. The rubber tightly fits around lines to minimize disruptive noise and equipment damage. It also prevents debris build-up and corrosion from metal-to-metal contact.

End Clamps—The top plate has a threaded hole for mounting with threaded rod. The bottom plate has fasteners for holding clamps together. You can attach a stacking clamp to the bottom of an end clamp.

Stacking Clamps—Include stacking hardware and a plate for attaching to an end clamp or other stacking clamps. To mount, the stacked clamps must be connected to an end clamp.

	ID				For Conduit Trade Size				End Clamps			Stacking Clamps
	Inch	Metric, mm	For Pipe Size	For Copper Tube Size	EMT	IMC	Rigid	Wt. Cap., lb.	For Thread Size		Each		Each
Santoprene Rubber



		1/4"	6	—	—	—	—	—	350	3/8"-16	3063T11	000000	3063T19	000000


		1/2"	13	1/8	3/8	—	—	—	350	3/8"-16	3063T12	00000	3063T21	00000
		3/4"	19	3/8	5/8	1/2	—	3/8	350	3/8"-16	3063T13	00000	3063T22	00000
		1"	25	—	3/4	3/4	—	—	350	3/8"-16	3063T14	00000	3063T23	00000
		1"	25	—	3/4	3/4	—	—	350	3/8"-16	3063T24	00000	3063T31	00000
		1 1/2"	38	—	1 1/4	1 1/4	—	—	350	3/8"-16	3063T25	00000	3063T32	00000
		2"	51	1 1/2	—	—	1 1/2	1 1/2	350	3/8"-16	3063T26	00000	3063T33	00000
		2"	51	1 1/2	—	—	1 1/2	1 1/2	350	3/8"-16	3063T84	00000	3063T95	00000
		2 1/2"	64	2	—	—	—	2	350	3/8"-16	3063T85	00000	3063T96	00000
		3"	76	2 1/2	—	2 1/2	—	2 1/2	350	3/8"-16	3063T86	00000	3063T97	00000
		3 1/2"	89	3	—	3	3	3	350	3/8"-16	3063T87	00000	3063T98	00000

Stackable Clamp Pipe Hangers


Shown Connected	Hinged End Clamps

Two Piece End Clamps	Two Piece Stacking Clamps

Stack these hangers to organize multiple lines of pipe, tubing, and conduit at any angle. Mount with threaded rod (not included) or connect two hangers using the included stacking screw.

Hinged—Combine the flexibility of a two-piece clamp with the simplicity of a one-piece clamp. These are easy to assemble, reposition, and take apart.

Two Piece—You don't need to access the end of your line to install these clamps. Detach the two halves and place them around pipe.

303 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.

End Clamps—Flat on one side and round on the other. Mount the flat side to threaded rod or connect it to the top of a stacking clamp. The round side has a finished look.

Stacking Clamps— Flat on top and bottom. Twist threaded rod through the stacking hole on top or the mounting hole on the bottom. You can also use a fastener to connect the top of one hanger to the bottom of another hanger.

	ID						End Clamps		Stacking Clamps
	Inch	Metric, mm	For Pipe Size	For Copper Tube Size	For EMT Conduit Trade Size	For Thread Size		Each	Stacking Hole Thread Size		Each
Hinged







				Steel

				3/4"	19	3/8	5/8	3/4	1/4"-20	5270N11	000000	—	———	0


				7/8"	22	1/2	3/4	3/4	1/4"-20	5270N32	00000	—	———	0
				1"	25	—	—	1	1/4"-20	5270N12	00000	—	———	0
				1 1/8"	29	3/4	1	1	1/4"-20	5270N13	00000	—	———	0
				1 1/4"	32	—	—	1 1/4	1/4"-20	5270N14	00000	—	———	0
				1 3/8"	35	1	1 1/4	1 1/4	1/4"-20	5270N15	00000	—	———	0
				1 1/2"	38	—	—	1 1/2	1/4"-20	5270N16	00000	—	———	0
				1 11/16"	42	1 1/4	1 1/2	1 1/2	1/4"-20	5270N36	00000	—	———	0
				1 15/16"	49	1 1/2	—	2	1/4"-20	5270N38	00000	—	———	0




						303 Stainless Steel

						3/4"	19	3/8	5/8	3/4	1/4"-20	5270N21	00000	—	———	0


						7/8"	22	1/2	3/4	3/4	1/4"-20	5270N52	00000	—	———	0
						1"	25	—	—	1	1/4"-20	5270N22	00000	—	———	0
						1 1/8"	29	3/4	1	1	1/4"-20	5270N23	00000	—	———	0
						1 1/4"	32	—	—	1 1/4	1/4"-20	5270N24	00000	—	———	0
						1 3/8"	35	1	1 1/4	1 1/4	1/4"-20	5270N25	000000	—	———	0
						1 1/2"	38	—	—	1 1/2	1/4"-20	5270N26	000000	—	———	0
						1 11/16"	42	1 1/4	1 1/2	1 1/2	1/4"-20	5270N56	00000	—	———	0
						1 15/16"	49	1 1/2	—	2	1/4"-20	5270N58	00000	—	———	0


						Two Piece







										Steel

										3/4"	19	3/8	5/8	1/2	1/4"-20	2236T17	00000	10-24	2236T11	000000


										7/8"	22	1/2	3/4	3/4	1/4"-20	2236T61	00000	10-24	2236T71	00000
										1"	25	—	3/4	3/4	1/4"-20	2236T18	00000	10-24	2236T12	00000
										1 1/8"	29	3/4	1	—	1/4"-20	2236T19	00000	10-24	2236T13	00000
										1 1/4"	32	—	1	1	1/4"-20	2236T27	00000	10-24	2236T14	00000
										1 3/8"	35	1	1 1/4	—	1/4"-20	2236T28	00000	10-24	2236T15	00000
										1 1/2"	38	—	1 1/4	1 1/4	1/4"-20	2236T29	00000	10-24	2236T16	00000
										1 11/16"	42	1 1/4	1 1/2	1 1/2	1/4"-20	2236T62	00000	10-24	2236T72	00000
										1 15/16"	49	1 1/2	—	2	1/4"-20	2236T63	00000	10-24	2236T73	00000




303 Stainless Steel

3/4"	19											3/8	5/8	1/2	1/4"-20	2236T31	00000	10-24	2236T21	00000


7/8"	22											1/2	3/4	3/4	1/4"-20	2236T52	00000	10-24	2236T42	00000
1"	25	—										3/4	3/4	1/4"-20	2236T32	00000	10-24	2236T22	00000
1 1/8"	29	3/4	1									—	1/4"-20	2236T33	00000	10-24	2236T23	00000
1 1/4"	32	—	1									1	1/4"-20	2236T34	00000	10-24	2236T24	00000
1 3/8"	35	1	1 1/4									—	1/4"-20	2236T35	00000	10-24	2236T25	00000
1 1/2"	38	—	1 1/4									1 1/4	1/4"-20	2236T36	00000	10-24	2236T26	00000
1 11/16"	42	1 1/4	1 1/2									1 1/2	1/4"-20	2236T55	00000	10-24	2236T45	00000
1 15/16"	49	1 1/2	—									2	1/4"-20	2236T56	00000	10-24	2236T46	00000