Not as bulky as our other constant-tension clamps, these round-wire clamps easily fit in cramped spaces. Use in low-pressure applications.

The T-bolt design provides excellent strength and creates a 360° seal. Clamps have a spring that automatically adjusts the clamp diameter when temperatures fluctuate.

A thumb screw instead of a slotted screw allows you to install these clamps without any tools.

Installing these clamps is a snap—push their interlocking teeth together with your fingers, then squeeze tight with pliers. To remove, use pliers to push sideways and separate the teeth.

These pinch clamps come packed in a box with individual compartments for each clamp size. Easier to install than worm-drive clamps, crimp the pinch points with pinch-clamp pincers for a secure hold. They’re commonly known as ear clamps.

Unlike vibration-resistant pinch clamps, these have a torque rating for extra holding power in high-vibration applications. They are also known as high-torque clamps.

Clamps offer extra holding power in high-torque applications.

Make quick changeovers without sacrificing a tight seal.

Made of our most corrosion resistant stainless steel, these worm-drive clamps stand up to harsh acids and chemicals. Their band is smooth and has rolled edges, so they won’t cut into your hose or tube.

These clamps are easier to install than our Extra-Strength Low-Profile Band Clamps. Also known as center-punch clamps, they seal with a quick hammer blow to the buckle.

Used to secure Viega PEX fittings to Viega PEX tubing, these clamps meet an ASTM standard to ensure compatibility.

Clamps have a smooth band with rolled edges to prevent them from cutting into your hose or tube.

An extended tail acts as a liner to protect hose and tube from being cut by the slots in the band.

The bolt design provides high strength and creates a 360° seal to prevent leaks.

Remove the bolt and flip open the hinged bridge to install.

Don't worry about your hose and tube expanding and contracting when temperatures fluctuate—these clamps have a Bellville spring that automatically increases and decreases the clamp's diameter.