A nonreflective black oxide finish prevents glare that can interfere with machine vision systems.

Hold workpieces of slightly different thicknesses with one clamp. These clamps automatically adjust to compensate for imperfections or small inconsistencies on the material’s surface.

The handle locks in a horizontal position for more clearance above the clamp than standard hold-down toggle clamps.

Hold workpieces of different thicknesses without adjustment.

Push the lever to lock the handle and prevent accidental opening.

Push the lever to lock the handle and prevent accidental opening.

Weld these clamps to the side of an object or drill your own holes in the mounting plate and bolt into place.

Mount these clamps below a surface.

The handle locks in a horizontal position for more clearance above the clamp.

Suitable for production applications, these clamps have double the service life of other air-powered toggle clamps.

Replace worn screws or customize your clamps.

The base fits into round or square holes on most workholding tables for clamping anywhere on the work surface.

Smaller than standard push/pull toggle clamps, these are often used for electronics and small fixturing applications.

Pull the handle backward to push the plunger forward. These clamps secure when the plunger is fully extended to hold your workpiece from the side.

Secure your workpiece from the side by fully extending the plunger, and push a lever to lock the handle in place.

Moving parts are protected by a metal cover when the clamp is engaged to prevent dirt and dust from clogging the clamp.

Panel mount through a hole with the included nut, or drill and tap a hole to flush mount. A pushing or pulling motion holds workpieces from the side.

Secure these clamps to a rail or bar.

Drill a hole to mount these clamps through a surface and secure the mounting flange with screws. The plunger can be locked at any position along its travel.

With five times the capacity of standard C-clamps, these are the highest capacity clamps we offer.

These clamps are made of stainless steel for excellent corrosion resistance.

Lighter weight than other metal clamps, these are less likely to bend thin material.

Made entirely of fiberglass, these clamps won’t transmit electricity and are chemical resistant. They're often used around electrical equipment as well as in plating and anodizing applications.

With no handle or protruding screw, these clamps can fit into tight spaces.

Three screws apply pressure to three sides of a workpiece.

Plastic clamping surfaces prevent damage to material.

Apply pressure to the side of a workpiece as well as the top and bottom.

These clamps meet DIN VDE 0680-1 for protection against accidental contact with live electrical circuits.

Press the lever to lock the clamp onto material.

Hold large workpieces with a standard-size clamp. Slide the jaws to adjust the opening size.

Extend the handle to reach the clamp into tight spaces.

Squeeze the handles and the jaws will automatically adjust to fit your workpiece.

A removable, heavy duty steel base plate provides a flat, durable clamping surface. Carry it where needed or mount the base plate to your workbench.

Press the lever down to lock these clamps, which fit in tight spaces and hold thin materials.

The jaws on these tools apply outward pressure for use as a spreader.

Use these tools for light duty clamping. Squeeze the handles to open; release to close.

Set includes 12 clamps and the installation pliers required for positioning and removal.

These clamps have twice the capacity of standard fast-action bar clamps.

Pull the handle to lock the jaw in place and prevent loosening caused by vibration.

Pull the lever to slide the clamping arm along the bar; release to lock in place.

Place the arms on a pipe that is threaded at one end and at least 12" long to create your own bar clamp.

Press the trigger to slide the clamping arm along the bar. Release the trigger and squeeze the pistol‐grip handle to lock the clamp in place.

The large, flat jaws remain parallel when clamping to apply even pressure without denting or marring the workpiece. Pull the handle to lock or release the clamping arm.

Attach to your bar clamp to hold material on three sides.

Also known as J-clamps, these provide additional clearance to reach around obstructions and clamp workpieces in recessed areas.

Push the lever to lock the handle and prevent accidental opening.

Mount the clamp on a lid and the latch plate on the side of a container.

Use with T-slot nuts or bolts and a support to secure a workpiece, vise, or fixture to a machine table.

The stepped end provides support and quick height adjustment when paired with a step block.

Get everything needed for basic workholding on a machine table.

Use these blocks to support setup clamps. Fit the nonslip steps together for quick height adjustments.

The offset shape provides more clearance above the nut than standard clamps. Also known as gooseneck clamps.

A plastic pad on the gripping surface of these clamps prevents workpiece marring, making them useful for holding polished surfaces and reducing the need for secondary finishing steps.

Unlike other setup clamps that grip the horizontal surface of a workpiece, these clamps have a pivoting ball in the tip to get a firm hold on angled parts.

The built-in T-slot nut on these side clamps lets you clamp a part to a machine table quickly. Their small footprint leaves more free space on your table than standard side clamps.

Use these clamps to hold large round parts for machining. Each clamp comes with five lengths of chain that combine to accommodate different size workpieces.

Attach to the end of a screw or threaded stud to apply uniform pressure on uneven and angled surfaces. Also known as toggle and swivel-foot pads.

Attach to the end of a screw or threaded stud—the serrated face swivels to grip uneven and angled surfaces. Also known as toggle and swivel-foot pads.

Also known as press screws, mount these clamps through a drilled hole and turn the crank to move the jaw end of the screw in and out.

Machine these clamps to match the contours of your workpiece and turn the screw to grip.

Install these clamps into a slot in your fixture to grip at the bottom of a workpiece edge, giving the cutting tool maximum access.

Set one of these clamps between two workpieces in a fixture and tighten the screw to push the clamp's sides out for a secure hold.

Tighten the spring-loaded socket head cap screw on these clamps to hold your workpiece from above.

Mount using the holes in the base.

These clamps wedge against the workpiece ID to grip cast, unfinished, or uneven parts, leaving the outside clear for machining.

Each jaw can be positioned at an angle to hold round, angled, and odd-shaped material.

Hold magnetic workpieces in place with these clamps.

Sized for small parts and tight spaces, these clamps have a pivoting pad at each end to hold workpieces at any angle up to 180°.

Clamp workpieces from the outside at a 90° angle, leaving the inside free for welding or fabrication.

With five times the capacity of standard corner clamps, these secure two workpieces at a 90° angle.

The open clamp design permits welding around almost the entire pipe circumference. A combination of chains and support bars hold a variety of pipe sizes.

Sets include clamps with different ODs as well as installation pliers.

For large workpieces, these vises open three times as wide as standard tilting-head vises. Tilt and lock the head to position work at an angle.

Rotate the head 360° to use three different vise jaws and lock workpieces in position at 45° intervals.

Use these vises for general purpose workholding.

A bright yellow vise body stands out on the shop floor.

The movable jaw can be repositioned to extend the jaw opening. Pull out the entire sliding section and insert it on the opposite side of the vise.

Insert these one-piece grooved liners between vise jaws to hold small-diameter material vertically.

These V-shaped liners hold large round material.

Hold your smallest workpieces in these vises, which have a clamp-on base for quick installation and removal from a benchtop.

Replace worn flat and V jaws.

Clamp tubing into these holders to keep it steady while you cut, flare, or expand the end.