These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.

To prevent accidental opening, these latches have a safety catch.

These latches use downward compression to pull surfaces together for sealing gasketed doors.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

These latches are typically used to secure hoods and covers.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

No need for a strike plate, these latches hook into a lip or notch.

Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.

Each latch comes with a variety of strike plates for different mounting options.

Draw lightweight surfaces together with these latches.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.

Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.

Adjust the latching distance to compensate for gasketing and misalignment.

Each latch comes with a variety of strike plates for different mounting options.

Open several draw locks with the same key.

For use on gasketed doors, these latches use downward compression to pull surfaces together.

Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.

Turn the screw on the latch to adjust the gripping force on the strike plate.

Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.

Close and open these grab latches with a push—there's no need for a handle.

There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.

To prevent doors from slamming, these latches are hydraulic.

To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.

Made to NSF/ANSI standards, these latches have a completely sealed magnet to eliminate crevices that can trap food particles.

Operate these padlockable latches from either side of the door—there is a handle on both sides.

Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.

For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.

Keep doors on refrigerators and industrial enclosures closed.

Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame.

Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

Mount these padlockable eyes to the front of a door and door frame.

Mount these hasps around complex curves, angles, and corners that other corner hasps can't reach.

Choose these hasps if you need hasps that each open with a different key.

The mounting screws on these latches are concealed to prevent tampering.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Designed for use in 1/2" dia. through holes.

These latches are IP65 rated for protection against dust, dirt, and washdowns.

With a flat inset grip, the handle is recessed to stay out of the way.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Raise the handle and it swings smoothly for easy latching and unlatching.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

Press the button and the handle snaps open; push the handle shut for a secure hold.

These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.

Designed for use in 1/4" or 1/2" dia. through holes.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Made of plastic, these locks are suitable for damp and humid environments.

Designed for use in 1/2" dia. through holes.

These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns.

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Designed for use in 1/2" dia. through holes.

Made of plastic, these locks are suitable for damp and humid environments.

To prevent internal damage, these locks have a stainless steel shutter that blocks rain, snow, and dirt from entering the cylinder.

Offering more security than standard master keyed cam locks, these have circular keys that are difficult to duplicate.

These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.