Connect claw-clamp high-vacuum fittings for an airtight seal.

Create airtight seals in high-vacuum systems by placing these rings between two claw-clamp (ISO-K) or bolt-together (ISO-F) fittings.

With no handle or protruding screw, these clamps can fit into tight spaces.

These clamps are made of stainless steel for excellent corrosion resistance.

Lighter weight than other metal clamps, these are less likely to bend thin material.

A bright finish makes these clamps easy to see.

With five times the capacity of standard C-clamps, these are the highest capacity clamps we offer.

Turn the handle to tighten these multipurpose tools for strong clamping in nearly any application.

Apply pressure to the side of a workpiece as well as the top and bottom.

Hold the workpiece down against a bench or table.

The long, pivoting jaws let you clamp farther into your workpiece and in tight spots.

Mount to the top of your workbench.

Squeeze the handles and the jaws will automatically adjust to fit your workpiece.

Slide the upper jaw to adjust the opening size. These clamps hold larger workpieces than other locking plier clamps of similar size.

Angled jaws clamp sheets, bars, and U-channels at 90°.

For repetitive clamping, turn the holding screw to adjust the opening size one time, and then use the handles to secure and release workpieces.

Pull the lever to slide the clamping arm along the bar; release to lock in place.

Press the trigger to slide the clamping arm along the bar. Release the trigger and squeeze the pistol-grip handle to lock the clamp in place.

All adjustments can be made from one end, allowing clamping in tight spaces.

The clamping arm slides freely along the bar for quick, one handed positioning. Tighten the screw onto a workpiece and the arm locks in place.

For the most demanding jobs, these clamps have almost five times the capacity of standard fast-action bar clamps.

The swivel pads pivot to grip nearly any shape of material.

The large, flat jaws remain parallel when clamping to apply even pressure without denting or marring the workpiece. Pull the handle to lock or release the clamping arm.

Install these clamps into a slot in your fixture to grip at the bottom of a workpiece edge, giving the cutting tool maximum access.

The matching jaws are ground flat for a firm grip and even pressure when clamping smooth surfaces.

Position these clamps between two workpieces, vises, or fixtures and secure both to your machine table using T-slot nuts or bolts.

Designed to provide more clearance above the nut than standard clamps, these have an offset shape. Also known as gooseneck clamps.

Add a crossbeam for hanging lifting equipment, creating overhead conveyor systems, and supporting structural applications.

Clamp to both sides of a beam to add an anchor point for hoists and other overhead equipment.

Also known as purlin clamps, these clamps are shaped to fit around beams that have a 45° or 90° lip.

For centered load distribution, these clamps grip both sides of the beam and hang threaded rod from the middle.

These clamps have a fixed hanger for rigid connections.

Combine these grippers with your gripping fingers to lift and move items in pick-and-place applications.

The needles on these grippers grab hold of flexible and porous items that are difficult for vacuum cups and magnetic grippers to grasp, such as fabric, foam, glass and metal fiber, and carpet.

Including a robot tool mount and electrical connectors, these grippers come ready to attach to robot arms with standard ISO 50 mounting hole patterns. Good for areas without compressed air, they use electricity to pick and place items in packaging, assembly, and machine-tending applications.

For applications without access to compressed air, such as mobile robots, these grippers use electricity to perform highly accurate pick and place tasks including assembly, finishing, and packaging.

Clamps can take a metal plate that is stacked horizontally and tilt it up 90° to lift vertically. After lifting, clamps can place the plate back down in the original position (plate can not be flipped over).

Pads on these clamps prevent the grip from biting into the load.

Use these clamps to raise a metal plate straight up from its original vertical position.