Clean Room Ball Bearing Carriages

Filter by

Rail Width

Carriage Length

Carriage Width

Overall Height

Carriage Profile

Carriage Material

Number of Mounting Holes

Mounting Hole Thread Size

Load Fastening

End Seal Material

Dynamic Load Capacity

Clean Room Standard

Static Roll Moment Load Capacity

Static Yaw Moment Load Capacity

Maximum Temperature

Static Pitch Moment Load Capacity

Static Load Capacity

Mounting Fastener Thread Size

REACH Compliance

RoHS Compliance

DFARS Compliance

Mounting Hole Depth

Lubrication Inlet

Forward

How can we improve?

48 Products

About Moment Loads

Standard Carriage

Flanged Carriage

Load Fastening from Top

Load Fastening from Bottom

Guide Rail

Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity. End seals keep lubricant in and dirt out.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Flanged carriages have threaded mounting holes on the flanges rather than the carriage body, so you can fasten loads from both the top and bottom. When fastening from the bottom, use the mounting hole as a through-hole.

Add mounting hole plugs to protect mounting fasteners from corrosion.

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

For technical drawings and 3-D models, click on a part number.

Standard Carriages and Guide Rails

440 Stainless Steel Carriages								440 Stainless Steel Guide Rails			Made-to-Order 440 Stainless Steel Guide Rails			Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Environmental Rating		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each
Load Fastening From Top
5	120	6	12	16	Fed. Std. Class 1,000; ISO Class 6	00000000	0000000	60; 90; 120; 150	0000000	00000	30-195	0000000	00000	000000	00
5	150	6	12	19	Fed. Std. Class 1,000; ISO Class 6	000000	000000	60; 90; 120; 150	0000000	000	30-195	0000000	000	000000	00
7	210	8	17	19	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	60; 90; 120; 180	0000000	000	30-285	0000000	000	000000	00
7	290	8	17	23.5	Fed. Std. Class 1,000; ISO Class 6	000000	000000	60; 90; 120; 180	0000000	000	30-285	0000000	000	000000	00
7	380	8	17	31	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	60; 90; 120; 180	0000000	000	30-285	0000000	000	000000	00
9	260	10	20	21.5	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	80; 160; 220; 280	0000000	000	40-840	0000000	000	00000000	00000
9	400	10	20	30	Fed. Std. Class 1,000; ISO Class 6	000000	000000	80; 160; 220; 280	0000000	000	40-840	0000000	000	00000000	0000
9	530	10	20	40.5	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	80; 160; 220; 280	0000000	000	40-840	0000000	000	00000000	0000
12	490	13	27	25	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	150; 200; 350; 475	0000000	000	50-975	0000000	000	00000000	0000
12	740	13	27	34	Fed. Std. Class 1,000; ISO Class 6	000000	000000	150; 200; 350; 475	0000000	000	50-975	0000000	000	00000000	0000
12	960	13	27	44	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	150; 200; 350; 475	0000000	000	50-975	0000000	000	00000000	0000
15	780	16	32	32	Fed. Std. Class 1,000; ISO Class 6	0000000	000000	160; 240; 560; 680	0000000	000	80-960	0000000	000	00000000	0000
15	1,100	16	32	42	Fed. Std. Class 1,000; ISO Class 6	000000	000000	160; 240; 560; 680	0000000	000	80-960	0000000	000	00000000	0000
15	1,450	16	32	57	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	160; 240; 560; 680	0000000	000	80-960	0000000	000	00000000	0000
20	1,000	20	40	38	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	240; 480; 660; 840	0000000	000	120-900	0000000	000	00000000	0000
20	1,450	20	40	50	Fed. Std. Class 1,000; ISO Class 6	000000	000000	240; 480; 660; 840	0000000	000	120-900	0000000	000	00000000	0000
20	1,900	20	40	68	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	240; 480; 660; 840	0000000	000	120-900	0000000	000	00000000	0000

Flanged Carriages and Guide Rails

440 Stainless Steel Carriages								440 Stainless Steel Guide Rails			Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Environmental Rating		Each	Rail Lengths, mm		Per mm		Each
Load Fastening From Top and From Bottom
15	3,150	24	47	64	Fed. Std. Class 10,000; ISO Class 7	00000000	0000000	160; 280; 460; 640	0000000	00000	000000	00000
20	5,000	30	63	79	Fed. Std. Class 10,000; ISO Class 7	00000000	000000	220; 460; 640; 820	0000000	000	000000	000
23	7,100	36	70	92	Fed. Std. Class 10,000; ISO Class 7	00000000	000000	220; 460; 820; 1,240	0000000	000	000000	000

Clean Room Electric Positioning Slides

Controller (Included)

Slide

Prevent dust from circulating while precisely positioning parts for drilling, fastening, assembly, and measuring. These slides have a built-in vacuum port to remove fine particles that could damage electronics or contaminate batches in clean rooms. Because they have an integrated stepper motor with an included controller, you can adjust the speed, timing, and positioning with no extra software required. At ± 0.02 mm, these slides have a repeatability thinner than a single sheet of paper, so the carriage hits the same spot every time. Unlike air-powered actuators, they’ll hold their position even if power fails. They’re also more energy efficient.

Dynamic load capacity is the maximum load slides can move. If you increase the speed, the dynamic load capacity decreases. Use a load-speed chart to confirm which slides will work for your application. Click on a part number and select "Product Detail" to view the chart.

Maximum speed is how fast the slide will move under no-load conditions. If you increase the load, the slide speed will decrease.

Travel distance per full step determines the control you have over the slide’s positioning. The smaller the measurement, the finer positioning control you have.

Travel distance per turn, also known as screw lead, is how far the carriage moves with one rotation of the ball screw.

For technical drawings and 3-D models, click on a part number.

Dynamic Load Cap., lbs.			Travel Distance per			Overall			Carriage
Horizontal	Vertical	Max. Speed, mm/s	Full Step, mm	Turn, mm	Repeatability, mm	Lg., mm	Wd., mm	Ht., mm	Lg., mm	Wd., mm	Bearing Type	Base Material	Full Load Current	Voltage	Environmental Rating		Each
200 mm Stroke Length
110	44	250	0.08	8	±0.02	541	70	84	122	60	Ball	Aluminum	5A	24V DC	Fed. Std. Class 10, ISO Class 4	0000000	000000000
143	50	250	0.1	10	±0.02	614.5	90	85.5	170	74	Ball	Aluminum	5A	24V DC	Fed. Std. Class 10, ISO Class 4	0000000	00000000
300 mm Stroke Length
110	44	250	0.08	8	±0.02	641	70	84	122	60	Ball	Aluminum	5A	24V DC	Fed. Std. Class 10, ISO Class 4	0000000	00000000
400 mm Stroke Length
110	44	250	0.08	8	±0.02	741	70	84	122	60	Ball	Aluminum	5A	24V DC	Fed. Std. Class 10, ISO Class 4	0000000	00000000
143	50	250	0.1	10	±0.02	814.5	90	85.5	170	74	Ball	Aluminum	5A	24V DC	Fed. Std. Class 10, ISO Class 4	0000000	00000000
600 mm Stroke Length
143	50	250	0.1	10	±0.02	1,014.5	90	85.5	170	74	Ball	Aluminum	5A	24V DC	Fed. Std. Class 10, ISO Class 4	0000000	00000000
800 mm Stroke Length
143	50	250	0.1	10	±0.02	1,214.5	90	85.5	170	74	Ball	Aluminum	5A	24V DC	Fed. Std. Class 10, ISO Class 4	0000000	00000000

Email Us

About Moment Loads

Clean Room Ball Bearing Carriages and Guide Rails

Clean Room Electric Positioning Slides