Often worn when stress-testing semiconductors—where parts go from freezer to furnace—these gloves won't contaminate your clean room. They’re cleaned and bagged in environments with low levels of particulates. These gloves also give you more dexterity when handling items than the basic pinching you get with mitts. Plus, they're ambidextrous, so you can wear them on either hand to extend their life.

Aramid fabric gloves have a wider temperature range than silicone rubber gloves. Even at 1000° F, they won’t burn or leave a residue. These gloves should only be used to handle dry objects.

Silicone rubber gloves meet EN 374 standards for protection against chemicals. And unlike aramid fabric gloves, they can be used to handle wet material.

Cleaned and bagged in environments with low levels of particulates, these gloves won't contaminate your work area.

Style A gloves are knitted—the higher the knitting gauge, the thinner the glove. Thinner gloves let you move more freely and feel finer details; thicker gloves are more durable. These gloves have a rubber coating for a secure grip and an extra layer of protection without restricting movement. Polyurethane-coated gloves are thin and lightweight. They’re good for assembling small parts, handling fragile materials, and other jobs that require touch sensitivity. Nitrile-coated gloves resist oil and chemicals.

Style B gloves keep static electricity from building up and damaging sensitive electronic equipment. Rated to ANSI/ESD S20.20 standards, they’re safe to use with components that could be damaged by any amount of voltage. You can wear these gloves during electronics manufacturing, semiconductor fabrication, and other jobs where static control is essential.

Gloves that meet ANSI/ISEA 105 are rated for various forms of protection, such as cut, abrasion, or puncture resistance. The higher the rating, the greater the protection.

Dip components into acid baths, assemble circuits, and take on other clean room tasks involving hazardous chemicals. Made from a blend of neoprene, latex, and nitrile, these gloves withstand harsh substances such as hydrochloric acid and isopropyl alcohol. They’re flexible enough to let you handle small parts with control. Cleaned and bagged in an environment with low levels of particulates, these gloves won't contaminate your clean room. Plus, they're powder-free and unlined, so they won't shed particles either.

All meet EN 374, a European safety standard for protection from chemicals. Rated Type B, they resist chemical permeation for at least 30 minutes. They also meet EN 388 standards for resistance to abrasions, cuts, and tears.

Gloves with a sleeve extend past the elbow to protect the full hand and arm.

Snip circuit board leads, inspect silicon wafers, and handle other sharp components in clean rooms. Not only are these gloves rated to protect your hands from cuts, they’re also lint-free and unlined to prevent shedding. They’re cleaned and bagged in environments with low levels of particulates, so they won’t contaminate your work area.

All meet ANSI/ISEA 105 standards for various forms of protection, such as cuts, abrasions, and punctures. Gloves with an A5 rating can be used with blades, knives, and sharp wire. A9-rated gloves can be used to handle spikes or lift heavy objects with sharp edges.

Gloves with a nitrile coating are more resistant to oil and chemicals than polyurethane-coated gloves.

Protect objects in your clean room from skin oil and other contaminants when dexterity is essential and full hand coverage is not needed. Cleaned and bagged in clean environments, these powder-free, unlined cots won't contaminate your work area.

Static-control cots minimize the buildup of electrostatic charge to protect sensitive equipment from damage. The lower the surface resistivity, the faster and more effectively cots drain electrical charge.

Latex cots are the most form fitting. They’re good for jobs that require tactile precision.

Nitrile cots are a good alternative for those concerned with latex allergies.

Textured cots provide a better grip than smooth cots.

Handle everything from frozen samples to freshly soldered circuit boards without contaminating your clean room. These mitts protect your hands between -75° and 390° F. They don’t shed fibers, so your clean room stays clean. Compared to gloves, they’re easier to slip on and off—and they can even be worn over gloves—but aren’t a good choice when you need high dexterity. These mitts meet EN 374 standards for protection against chemicals.