We will reply to your message within an hour.
More
Remove oxidation, discoloration, and heat stains from most metals without causing pitting or other surface damage.
Clean, polish, and protect aluminum, brass, copper, chrome, and stainless steel with this polish. It removes oxidation, tarnish, and surface rust without scratching or dulling brushed finishes.
Designed for use in Fed. Spec. Class 100 and ISO Class 5 clean rooms, these cleaners won't leave a residue that could attract contaminants. They come sterilized and double bagged.
Polish molds, dies, fixtures, and molded materials. This polish removes plate-out, oxidation, and stains.
Less harsh than general purpose electrical cleaners, these cleaners are suitable for the delicate contacts in electronics and printed circuit boards.
Keep electric motors and generators working efficiently by removing dirt, grease/oil, gum, and wax.
Designed to be used together to improve the performance of electrical connections, cleaners remove oxidation and corrosion on connections while sealants coat them to prevent oxidation and corrosion.
Spray these abrasion- and wear-resistant coatings on motor winding wire, transformers, and other metal electrical parts to protect them from oils, chemicals, and moisture.
Chill individual electronic components on a circuit board to troubleshoot one circuit at a time.
Remove scale from water-cooled condensers, chillers, and non-potable water boilers.
Spray on to clean without rinsing.
Dissolve scale and mineral buildup in drinking water systems with these scale removers. They meet NSF/ANSI Standard 60 for use with components that come into contact with drinking water.
Remove scale and mineral deposits without damaging aluminum, brass, and other soft metals commonly found in pumps and heat exchangers.
Often used on the outside of cooling towers and condensers, these scale removers cling to vertical surfaces to dissolve scale and mineral deposits.
In addition to cleaning steam and hot water boilers, these conditioners control foam and pH levels to improve boiler efficiency and reduce energy costs.
Brush or spray on; then rinse off. These cleaners contain sodium hydroxide for tough jobs.
Spray on all types of metal molds to eliminate moisture, dirt, oils, and release agents.
Remove gels, blocking and filling compounds, dirt, grease, oil, tar, and wax often found in or on outdoor telecommunications cables before splicing them together to make a reliable connection.
Twice as concentrated as our standard disinfectant/cleaners, these cleaners are often used in laboratories and medical environments where contamination is a concern.
Kill bacteria, viruses, and fungi.
These disinfectants are NSF registered D2 for use in food-processing environments.
Less harsh than our other disinfectants, these disinfectants won't irritate sensitive skin.
These disinfectants contain quaternary ammonium compounds—also known as quats—to kill bacteria, viruses, and fungi on hard, nonporous surfaces. They’re commonly used to clean laboratories and areas that are regularly exposed to pathogens, such as hospital rooms.
These sanitizers are made from sterile denatured ethanol and can be used in clean rooms. The containers come double bagged.
Quickly dissolve and remove most adhesive residue.
Remove oil- or solvent-based residue from metal, plastic, wood, carpet, upholstery, and painted surfaces.
Remove oil-based residue from hard surfaces, painted surfaces, vinyl, carpet, and fabric.
Often used to clean sensitive parts and equipment in precision applications, such as electronics and medical device manufacturing, these cleaners rinse away without leaving a residue.
The handle makes it easy to brush by hand. Clean delicate surfaces inside tubes, pipes, and holes.
These sets include brushes in the most common screw sizes.
Attach the shank to a handle or power tool.
Clean delicate surfaces inside tubes, pipes, and holes.
Keep a variety of brushes on hand to clean surfaces inside tubes, pipes, and holes where scratching is a concern.
The handle makes it easy to brush by hand.
These brushes withstand temperatures up to 500°.
The handle makes it easy to clean tubes, pipes, and holes by hand.
Grip the handles on these brushes for extra leverage when cleaning tubes, pipes, and holes by hand.
Remove light-to-medium rust and stains and small burs from tubes, pipes, and holes.
The long shaft on these brushes snakes around curves to reach deep into tubes.
Made of phosphorus bronze that is Factory Mutual approved, these brushes inhibit sparking and are nonmagnetic and corrosion resistant.
Remove light to medium rust, stains, and small burs from tubes, pipes, and holes.
Abrasive grains are embedded in the entire length of the bristles to remove workpiece material as well as surface contamination in a single step.
Use for tasks such as removing weld slag, heavy surface contamination, and large burs from tubes, pipes, and holes.
Bristles inside the housing and a protruding brush clean the inside and outside of tubes in one step. Sets include brushes for three different tube sizes.
Bristles inside the housing and a protruding brush clean the inside and outside of tubes in one step.
Clean the inside and outside of a tube with one brush.
Sets include an assortment of brushes for cleaning the inside and outside of tubes.
Use for tasks such as removing weld slag, heavy surface contamination, and large burs.
Use on delicate surfaces.
Bristles at the top of these brushes clean the bottom of closed-end holes.
Clean delicate surfaces in hard-to-reach spots. Use these brushes to remove light-to-medium rust and stains and small burs.
Removable bands around the bristles keep them from flaring and breaking. Adjust the bands to change bristle length.
Use for tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. The small brush face can access hard-to-reach spots.
The bristles are coated with a synthetic compound that keeps them stiff and straight so they last longer than standard brushes.
The small brush face can access hard-to-reach spots to remove light-to-medium rust and stains and small burs.
The abrasive lasts longer than that of standard brushes.
These brushes conform to corners, curves, and irregular surfaces to remove light-to-medium rust and stains and small burs.
The bristles are coated with a synthetic compound that keeps them stiff and straight so they’re more aggressive and last longer than standard brushes.
Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step.
Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.
The rigid, front-facing bristles are partially twisted for added cleaning power when removing debris from flat surfaces.
The bristles are partially twisted in alternating directions, which prevents them from separating.
Two rows of bristles cover more surface area.
Made of phosphorus bronze that is Factory Mutual approved, the bristles on these brushes inhibit sparking and are nonmagnetic and corrosion resistant.
Clean around edges, corners, and contours with these dish-shaped brushes.
A special fastener on the back of these brushes allows you to easily swap one brush for another.
Remove light-to-medium rust and stains and small burs.
The handle curves sharply for cleaning in hard-to-reach spots.
Work in tiny spaces and on very small parts to remove light-to-medium rust and stains and small burs.
Use two types of bristles on one brush to remove light-to-medium rust and stains and small burs.
Turn the handle to expose more bristles as they wear.
Work on delicate surfaces in tiny spaces and on very small parts.
Use two types of bristles on one brush.
The cleaner fits into the T-slot grooves of your machine table to clear chips and debris.
The bristles angle inward in a V shape to get into narrow spaces.
Use on contours and angles or for reaching into cracks and corners.
Rigid, partially twisted bristles handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. Also known as knot-wire brushes.
Rigid, twisted bristles handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs.
Bristles are partially twisted in alternating directions, which prevents them from separating.
The bristles are twisted all the way to the end so they’re more rigid and clean fastest.
Leave a corrosion-resistant film on parts after washing.
Unlike other solvent-based parts washing solutions, these won't leave anything behind.
Use in bioremediating (also known as self-cleaning) parts washers. Microbes in the solution consume and destroy grease and oil to prevent it from building up in the solution.
Also known as aqueous cleaning solutions, these water-based solutions are for general purpose cleaning.
Also known as semi-aqueous cleaning solutions, these consist of water and other components such as ammonia or citrus. They clean parts with heavy contamination such as buffing and lapping compounds.
These petroleum-based, ammonia-free solutions are the strongest we offer.
Dissolve residue that solvent-based cleaning solutions can leave behind.
These brushes have steel bristles for removing weld slag and heavy surface contamination.
Regulate the flow of washing solution with the push-button control.
Clean grease and oil from parts.
Prevent rust on parts and stored steel media.
Control media residue so it isn’t transferred to your parts.