Maximize your dust mop's cleaning power with these dust- and dirt-grabbing treatments. They stop dust and debris from scattering during shakeout.

Treatment in the 1-gallon jug is UL listed for slip resistance.

Treatments that cannot be sold outside the United States are restricted by product labeling requirements.

Quickly strip multiple layers of acrylic and urethane floor finish.

Strippers that cannot be sold to Canada exceed local regulatory limits on VOC (volatile organic compounds).

Clean dust, dirt, and flux off work surfaces while also dissipating static. Product regulations restrict sales to the listed jurisdictions/areas.

Clean rust and lime deposits such as calcium and scale from HVAC systems, coolers, tools, and vehicles. These removers are nonabrasive and noncorrosive, so they won’t damage surfaces. Derived from plants, they don’t contain toxic chemicals such as bleach, ammonia, alcohol, or phosphates. These removers break down quickly, so they won’t pollute air and water. They’re NSF registered for use in food- and beverage-processing facilities, and meet the EPA Safer Choice standard for environmentally friendly ingredients. They also help you meet LEED Green Building standards.

Eliminate static buildup to protect electronic equipment from damage caused by static discharge. These neutralizers also help prevent dust and dirt buildup on equipment.

Neutralizers that are NSF registered P1 can be used in food-processing environments.

For strong bonds, clean and degrease surfaces before applying adhesives. These cleaners are NSF registered K1 for use in non-food-processing areas within food-processing facilities.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

Use these cleaners on PVC, CPVC, and ABS pipe to remove dirt and degrease surfaces.

Twice as concentrated as our standard disinfectant/cleaners, these cleaners are often used in laboratories and medical environments where contamination is a concern. They comply with OSHA 29 CFR 1910.1030 for disinfecting surfaces soiled with blood or bodily fluids. Due to product registration requirements for disinfectants, they cannot be sold outside the United States.

Kill bacteria, viruses, and fungi. Some of these cleaners also remove dirt. They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).

Foam cleaners cling to vertical surfaces to clean them more effectively than liquid cleaners.

Tablet cleaners dissolve in water to create a neutral-pH solution for use on hard surfaces or in foggers to disinfect large areas. They’re less irritating on skin than bleach, give off less of an odor, and won’t damage equipment or finishes. Their tablet form makes it easy to mix up a solution, with no risk of spilling hazardous chemicals.

These disinfectants are NSF registered D2 for use in food-processing environments. They kill bacteria, viruses, and fungi with silver ions, so there are no harsh or toxic ingredients. They cannot be sold outside the United States due to import regulations.

Less harsh than our other disinfectants, these disinfectants won't irritate sensitive skin. Use them on most surfaces to kill bacteria, viruses, and fungi. They cannot be sold outside the United States due to product registration requirements.

These disinfectants contain quaternary ammonium compounds—also known as quats—to kill bacteria, viruses, and fungi on hard, nonporous surfaces. They’re commonly used to clean laboratories and areas that are regularly exposed to pathogens, such as hospital rooms. In addition to killing pathogens, they also remove dirt and odors. These disinfectants meet the EPA’s criteria for use against SARS-CoV-2, the virus that causes COVID-19, and help you comply with OSHA 29 CFR 1910.1200 for workplace decontamination. For proper use, let disinfectants soak on surfaces for the listed contact time before wiping away.

Liquid-concentrate disinfectants must be mixed with water before use and applied from a spray bottle. With a five-minute contact time, they kill pathogens more quickly than liquid and dissolvable-packet disinfectants.

Disinfectants that come in dissolvable packets easily break down in water to create a neutral-pH solution with no risk of spilling hazardous chemicals. Use them with sprayers, cloths, mops, and sponges. They don’t take up a lot of storage space.

Disinfectants that cannot be sold outside of the United States do not meet regulatory limits on VOCs (volatile organic compounds).

Bleach disinfects almost any surface as long as discoloration is not a concern. It cannot be sold to regions outside the United States due to regulatory limits on VOCs (volatile organic compounds).

Note: Do not mix with ammonia or other cleaners.

These sanitizers are made from sterile denatured ethanol and can be used in clean rooms. The containers come double bagged. They cannot be sold outside the United States due to product registration requirements.

Remove oil- or solvent-based residue from metal, plastic, wood, carpet, upholstery, and painted surfaces.

Gels cling to vertical surfaces to remove residue more effectively than liquids.

Remove oil-based residue from hard surfaces, painted surfaces, vinyl, carpet, and fabric.

Remove silicone, foam sealants, caulk, wet or dry latex-based foams, and construction adhesives. Safe for use on plastics, fiberglass, and most metals. These removers cannot be sold to Canada due to local chemical regulations.

Less aggressive than our standard epoxy removers, these solvent-based wipes remove uncured epoxy adhesives and solder paste. They are often used to wipe excess epoxy and paste off printed circuit boards and other electronic components.

These clinging gels eliminate mold stains and can be used on most surfaces, including grout, concrete, and brick.

Remove lime and hard-water stains with these nonfoaming cleaners. They can be used on most surfaces, including metal and plastic.