McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    12 Products

    No-Residue Solvent-Based Parts Washing Solutions

    Image of Product. Front orientation. Parts Washing Solutions. No-Residue Solvent-Based Parts Washing Solutions.
    Unlike other solvent-based parts washing solutions, these won't leave anything behind. They have a mild odor.
    Note: Use only at room temperature; do not heat.
    153° F Flash Point—Solutions with 153° F flash point are known as high-flash-point solutions.
    Cannot Be Sold To—These solutions cannot be sold to the areas listed because they exceed local regulatory limits on VOC (volatile organic compounds).
    Container
    Size,
    gal.
    Type
    Solution
    Type
    For Use On
    For Removing
    Flash Point,
    ° F
    Cannot Be
    Sold To
    Each
    Liquids
    5PailSolvent BasedAluminum, Brass, Bronze, Copper, Glass, Iron, Plastic, Stainless Steel, Steel, TitaniumAsphalt, Buffing and Polishing Compounds, Fingerprints, Grease, Lapping Compounds, Oil, Paint105California1974N110000000
    5PailSolvent BasedAluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel, TitaniumBuffing and Polishing Compounds, Grease, Lapping Compounds, Oil153California3457K15000000
     

    Solvent-Based Parts Washing Solutions

    Image of Product. Front orientation. Parts Washing Solutions. Solvent-Based Parts Washing Solutions.
    Leave a corrosion-resistant film on parts after washing. These solutions have a mild odor and contain no chlorinated solvents.
    Note: Use only at room temperature; do not heat.
    153° F Flash Point—Solutions with 153° F flash point are known as high-flash-point solutions.
    Cannot Be Sold To—These solutions cannot be sold to the areas listed because they exceed local regulatory limits on VOC (volatile organic compounds).
    Container
    Size,
    gal.
    Type
    Solution
    Type
    For Use On
    For Removing
    Flash Point,
    ° F
    Cannot Be
    Sold To
    Each
    Liquids
    5PailSolvent BasedAluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel, TitaniumBuffing and Polishing Compounds, Grease, Lapping Compounds, Oil105California3229K10000000
    5PailSolvent BasedAluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel, TitaniumBuffing and Polishing Compounds, Grease, Lapping Compounds, Oil153California3457K11000000
    50DrumSolvent BasedAluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel, TitaniumBuffing and Polishing Compounds, Grease, Lapping Compounds, Oil105California3229K300000000
     

    Water-Based Parts Washing Solutions

    Image of Product. Front orientation. Parts Washing Solutions. Water-Based Parts Washing Solutions.
    Clean faster by heating these solutions up to 140°. After washing, parts can be rinsed with water.
    Liquid Concentrates—Dilute liquid concentrates with water. 5-gallon pail makes up to 50 gallons of solution. 55-gallon drum makes up to 500 gallons of solution.
    Powders—Mix three to eight ounces of powder per gallon of water.
    Container
    Size,
    gal.
    Net Wt.,
    lb.
    Type
    Solution
    Type
    For Use On
    For Removing
    Max. Temp.,
    ° F
    Each
    Liquid Concentrates
    5—PailWater BasedAluminum, Brass, Bronze, Copper, Glass, Iron, Plastic, Stainless Steel, Steel, TitaniumCarbon Residue, Epoxy, Grease, Oil, Paint, Rust1403309K510000000
    55—DrumWater BasedAluminum, Brass, Bronze, Copper, Glass, Iron, Plastic, Stainless Steel, Steel, TitaniumCarbon Residue, Epoxy, Grease, Oil, Paint, Rust1403309K55000000
     
    Powders
    —25PailWater BasedAluminum, Brass, Bronze, Copper, TitaniumCarbon Residue, Epoxy, Grease, Oil, Paint, Rust1403309K63000000
     

    Microbial Parts Washing Solutions

    Image of Product. Front orientation. Parts Washing Solutions. Microbial Parts Washing Solutions.
    Use in bioremediating (also known as self-cleaning) parts washers. Microbes in the solution consume and destroy grease and oil to prevent it from building up in the solution. Dilute with water to make 19 gallons of solution.
    Container
    Size,
    gal.
    Type
    Solution
    Type
    For Use On
    For Removing
    Max. Temp.,
    ° F
    Each
    Liquid Concentrates
    1JugWater BasedAluminum, Brass, Bronze, Copper, Glass, Iron, Plastic, Stainless Steel, Steel, TitaniumAsphalt, Carbon Residue, Fingerprints, Grease, Lapping Compounds, Oil, Paint, Wax1201975N110000000
     

    Low-Foam Water-Based Parts Washing Solutions

    Image of Product. Front orientation. Parts Washing Solutions. Low-Foam Water-Based Parts Washing Solutions.
    This type of solution is good for use in spray washers where foaming can be a concern. It can be heated to 140° for faster cleaning. Dilute with water to make up to 40 gallons of solution.
    Container
    Size,
    gal.
    Type
    Solution
    Type
    For Use On
    For Removing
    Max. Temp.,
    ° F
    Each
    Liquid Concentrates
    5PailWater BasedIron, Stainless Steel, SteelCarbon Residue, Epoxy, Grease, Oil, Paint, Rust1403309K670000000
     

    Electropolishing Solutions

    Image of Product. Front orientation. Electropolishing Solutions.
    Smooth, brighten, and passivate metal parts for a mirror-like finish. When current is applied to these solutions, they dissolve microscopic surface flaws from your parts. These solutions contain mild concentrations of acids.
    For Stainless Steel—Polish 300-series, 17-4, and 420 stainless steel parts.
    Container
    For Use On
    Size,
    gal.
    Type
    Solution
    Type
    Harshness
    Each
    Cobalt Chromium1JugSolvent BasedModerate8660N11000000
    Stainless Steel
    		1JugSolvent BasedModerate8660N1200000
    back to top