Debur, clean, and blend faster than other nylon mesh discs.

The heavy duty construction provides more support than standard discs for heavy material removal.

The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.

A special fastener on the back of these discs allows you to easily swap one disc for another.

Used for heavy cleaning and stripping, these discs have an abrasive-embedded nylon mesh construction that gives you more control over sanding pressure.

The premium abrasive stays sharp longer.

A special fastener on the back of these discs allows you to easily swap one disc for another.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Fit these discs over your tool's arbor.

Holes in the disc let you see the surface you’re sanding.

Used for stripping, these discs eliminate discoloration from heat buildup.

Fit these discs over your tool’s arbor to sand stainless steel and hard metals.

The premium abrasive stays sharp longer. Holes in the disc let you see the surface you’re sanding.

Fit these discs over your tool's arbor to sand masonry, ceramics, and composites.

Press onto a compatible sanding tool or backup pad; peel off to remove.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Holes allow dust removal when used with a vacuum sander.

These discs have a long-lasting diamond abrasive.

Holes allow dust removal when used with a vacuum sander.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.

Made of foam, these discs can conform to contoured shapes, corners, and sharp edges.

The thick, abrasive-embedded nylon mesh construction gives you maximum control over sanding pressure.

Holes allow dust removal when used with a vacuum sander.

These discs have a harder abrasive than standard flap sanding discs.

The backing plate on these discs can be sheared away as the abrasive flaps wear down, allowing you to use more of the disc rather than replacing with a new one.

The flaps wrap around the outer edge of these discs to sand welds at right angles.

Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.

The flaps alternate between an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating more consistent finishes.

With more flaps than standard discs, these last 30-40% longer.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

Set at an angle and widely spaced, the flaps reach into corners.

Use with commercial floor buffing machines to sand wood floors and strip tape from concrete.

A coating prevents dust and debris from building up on the abrasive surface.

These assortments include various sizes and grits of flap sanding wheels. The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.

An additive in the abrasive resists heat.

The abrasive‐embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Various sizes and grits of flap sanding wheels are included in these assortments. Secure the shank into the collet or chuck of your tool.

The flaps are slit into narrow strips to provide more flexibility than other flap wheels.

A coating prevents dust and debris from building up on the abrasive surface.

Fit these wheels over your tool's arbor. The flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces.

Assortments include a selection of flap wheels to polish, clean, and deburr deep inside tubes and cylinders.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap wheels.

Polish, deburr, and remove rust from metal surfaces such as tools, machine parts, and electrical contacts.

Quickly remove vinyl, decals, tape, and double-sided molding striping and trim without damaging the surface below.

A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits.

The special shapes of these wheels provide more clearance than typical straight wheels.

Use these wheels for precision grinding on surface, cylindrical, and tool and cutter grinders. They are also known as Type 1 wheels and straight wheels.

Typically used with cylindrical, surface, and ID grinders, these wheels are specially designed to grind the inside diameter of workpieces.

Made with boron nitride, second in hardness to diamond, these wheels are highly wear resistant and easily cut difficult-to-grind steel parts.

The silicon carbide abrasive in these wheels is suspended in rubber for a cushioned grind with light material removal.

Use these wheels for light grinding, deburring, and sharpening.

Grind a variety of materials, such as metal, fiberglass, and ceramics. Also known as (AVOS) Type 29 wheels, they have an upside-down dish shape for a large contact area.

A large grinding surface, combined with a thick layer of rough abrasive removes more material than other wheels. They are also known as Type 11 wheels, flared-cup wheels, snagging wheels, and cup stones.

The saucer shape lets you hold these wheels at shallower angles than Type 27 wheels, so they’re more comfortable to handle. They are also known as Type 28 wheels and raised-hub wheels.

A blend of cotton laminate and aluminum oxide creates a smoother surface than other grinding wheels with similar grits. Wheels are also known as Type 27 wheels and raised-hub wheels.

A blend of ceramic alumina and zirconia alumina removes material at a 50% faster rate than our Long-Life Grinding Wheels. Wheels are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Made with aluminum oxide in a diamond pattern, these flexible wheels remove mill scale from metal, including pipe, in a single step.

Heat-dissipating holes reduce material buildup and extend the life of the wheel. Wheels have a semiflexible backing that conforms to curved and rough surfaces.

The flexible backing on these wheels conforms to curved and rough surfaces.

Mount these truing cleaners to a T-slot to reshape worn diamond and CBN grinding wheels.

Bits are specially formulated to stay cool during grinding, so they won’t mar or discolor stainless steel.

Made of aluminum oxide, these bits are well suited for use on most metals and materials that are not heat sensitive.

Made of ceramic alumina, these bits prevent material and heat buildup better than bits made of boron nitride and aluminum oxide when used on steel, stainless steel, iron, and titanium.

Almost as hard as diamond, these tungsten carbide bits cut through nonmetals without generating heat.

A uniform density helps distribute abrasive grains evenly throughout these felt wheels for a more consistent surface polish.

Loose layers of cloth conform to curves and contours.

Long, soft cotton strings conform to irregular surfaces and hold on to burring compounds longer than other wheels.

Pleats hold more buffing compound so you can work longer before having to reapply. The cotton is also cut at an angle to prevent fraying and extend wheel life.

Softer than flat-surface wheels, these conform to curves and contours.

The layers of sisal are sewn together for maximum rigidity and resistance to fraying.

The layers of flannel are sewn together, making these wheels more rigid than those for curved surfaces. Also known as Canton flannel buffs.

The abrasive is already embedded in these nylon mesh wheels so you don’t need messy polishing compounds.

Made of loose layers of cotton.

The wheel flares out as it spins for use on depressions and curved surfaces.

These bonnets won’t leave swirl marks or scratches when polishing waxed surfaces.