Clear Coat | McMaster-Carr

Filter by

Container Type

For Use On

Appearance

Type

For Use Outdoors

Formulation

Solution Type

Material

Performance

Primer Required for Use On

Touch Dry Time

Maximum Temperature

Container Size

Environment

RoHS

Mixing Required

Overall Dry Time

Container Net Weight

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Minimum Application Temperature

Maximum Application Temperature

Approximate Coverage @ Thickness

Minimum Temperature

39 Products

About Paint and Protective Coatings

Compare our offering of paint and protective coatings to find the right material for your surfaces.

Plastic Protective Coatings for Metal

Tough and long-lasting, these flexible coatings protect against rust and corrosion.

Acrylic Plastic—Aerosol Can

		Dry Time										Each
Container Net Wt., oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		1-11	12-Up



	12	Solvent Based	5	24	14 ft² @ 1 mil	No	150	55 to 80	Yes	Steel, Iron, Wood	Gloss Clear	7850T4	00000	00000


	12	Solvent Based	5	24	15 ft² @ 1 mil	No	150	55 to 80	Yes	Steel, Iron, Wood	Flat Clear	7850T5	0000	0000

Reflective Paint

Make items stand out under emergency lighting or in low-light environments. Excellent for signs and emergency equipment, this paint is clear so it won’t obscure the color of your item.

			Dry Time, hr.									Each
	Container Net Wt., oz.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Spray Position	Max. Temp., ° F	For Use Outdoors	For Use On	Color (Appearance)		1-5	6-Up
Alkyd—Aerosol Can



		10	Solvent Based	3	24	1 ft² @ 1 mil	Upright	200	Yes	Steel, Iron, Masonry, Concrete, Wood	Clear (Satin)	8116T81	000000	000000

Antislip Protective Coatings

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Epoxy—Aerosol Can

		Dry Time
Container Net Wt., oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	12	Solvent Based	20	24	15 ft² @ 1 mil	No	250	50 to 90	Yes	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Iron, Galvanized Iron, Galvanized Steel, Fiberglass, Masonry, Concrete, Stone, Asphalt, Wood	Gloss Clear	63825T74	000000

Covers

		Each
Roller Cover for Solvent-Based Coatings	6439T73	00000

Epoxy—Can

Apply gallon-sized water-based coatings with a roller.

Water Based—Water-based epoxy coatings are clear and can be applied over nearly any surface, even old coatings, without altering their appearance. These two-part coatings come with a mixer that attaches to a hand-held drill and a roller cover to apply them once mixed. The size listed is the combined total of the two parts.

OSHA Compliant 29 CFR 1910.22—Coatings that comply with OSHA 29 CFR 1910.22 meet requirements for walking-working surfaces.

		Dry Time, min.
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, min.	Max. Temp., ° F	Application Temp. Range, ° F	Specs. Met	For Use Outdoors	For Use On	Includes	Color		Each



	1	Water Based	27	30	185 ft² @ 38 mil	Yes	4:1	25	180	50 to 120	OSHA Compliant 29 CFR 1910.22	Yes	Aluminum, Brass, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall	Mixer, Roller Cover	Gloss Clear	6135T11	0000000

Covers

		Each
Roller Cover for Solvent-Based Coatings	6439T73	00000

Protective Coatings

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Rubber—Aerosol Can

Rubber coatings withstand salt and acids.

Cannot Be Sold Outside United States—Coatings that cannot be sold outside of the United States do not meet product labeling requirements. VOC (Volatile Organic Compounds) regulations restrict sales to the listed jurisdictions/areas.

Sealant Primers—Although sealant primer is not required for use on all materials, it can be used to prepare any surface to maximize the life of the coating. They cannot be sold outside of the United States due to product regulations.

Topcoats—Apply topcoat to give coated surfaces a glossy finish that resists fading. They cannot be sold outside of the United States due to product regulations.

Coatings																Sealant Primers			Topcoats
		Dry Time												Each
Container Net Wt., oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Primer Req. for Use On	Cannot Be Sold To	Color		1-5	6-Up	Cannot Be Sold To		Each		Each



	11	Solvent Based	40	24	6 ft² @ 5 mil	No	200	65 to 85	Yes	Steel, Iron, Plastic, Wood, Fabric	Steel, Iron	Outside United States	Semi-Gloss Clear	9560T4	000000	000000	Outside United States	9560T82	000000	9560T2	000000

Protective Coatings for Wood

Apply these wear-resistant coatings to wood to protect from scuffs, water, and oil damage.

Lacquer—Aerosol Can

Cannot Be Sold to Canada—Coatings that cannot be sold to the listed areas are restricted due to product labeling requirements.

		Dry Time											Each
Container Net Wt., oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp.	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color	Cannot Be Sold To		1-11	12-Up



	11.25	Solvent Based	30	2	40 ft² @ 1 mil	No	Not Rated	55 to 90	No	Wood	Flat Clear	—	20035T66	000000	000000


	11.25	Solvent Based	30	2	40 ft² @ 1 mil	No	Not Rated	55 to 90	No	Wood	Gloss Clear	Canada	20035T67	00000	00000

Polyurethane Rubber—Aerosol Can

		Dry Time
Container Net Wt., oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp.	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	11	Solvent Based	30	4	17 ft² @ 1 mil	No	Not Rated	40 to 80	Yes	Steel, Iron, Wood	Gloss Clear	7961T5	000000

Tung Oil—Can

Tung oil creates a clear, hard finish that has excellent moisture resistance. Apply with a brush.

		Dry Time
Container Size, qt.	Solution Type	Touch	Overall, hr.	Approx. Coverage, ft²	Mixing Req.	Max. Temp., ° F	For Use Outdoors	For Use On	Color		Each



	1	Solvent Based	Not Rated	24	150	No	95	Yes	Wood	Satin Clear	2542N1	000000

Plastic Protective Coatings for Nonferrous Metal

Protect brass, bronze, copper, and silver from moisture, chemicals, oxidation, and abrasion. This lacquer dries to a clear, hard finish that preserves the natural appearance of polished metal. It provides a long-lasting barrier against tarnish. The aerosol format allows even coverage on detailed or hard-to-reach surfaces without brush marks.

Lacquer—Aerosol Can

		Dry Time										Each
Container Net Wt., oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		1-11	12-Up



	12	Solvent Based	5	8	10 ft² @ 1 mil	No	150	60 to 80	No	Brass, Bronze, Copper, Silver	Gloss Clear	76885T73	000000	000000


	12	Solvent Based	5	8	10 ft² @ 1 mil	No	160	60 to 80	Yes	Brass, Bronze, Copper, Silver	Gloss Clear	76885T75	00000	00000

Peel-Away Protective Coatings for Metal

These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration. Water-based coatings are low odor, so they’re a good option for use in enclosed areas. Apply with a brush, roller, or sprayer.

Acrylic Plastic—Jug

	Max. Protection Time			Dry Time
Container Size, gal.	Indoor, mo.	Outdoor	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	For Use Outdoors	For Use On	Color		Each



	1	48	Not Rated	Water Based	30	8	750 ft² @ 1 mil	No	150	Yes	Aluminum, Steel, Ceramic, Glass, Concrete, Asphalt, Wood	Clear	7888T42	000000

Vinyl Plastic—Pail

			Dry Time
Container Size, gal.	Max. Indoor Protection Time	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	For Use Outdoors	For Use On	Color		Each



	5	Not Rated	Water Based	60	12	800 ft² @ 10 mil	No	250	No	Steel, Iron	Clear	7874T15	0000000

Polyurethane Protective Coatings

Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Polyurethane Rubber—Can

Image of Product. Front orientation. Protective Coatings. Polyurethane Protective Coatings.

		Dry Time, hr.
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	1	Solvent Based	2.5	8	230 ft² @ 5 mil	Yes	4:1	2.5	200	40 to 120	Yes	Steel, Iron, Concrete	Gloss Clear	70325T21	0000000

Protective Coatings for Concrete Floors

Protect concrete from mild chemicals, salts, soaps, and detergents. Use on concrete that's at least 30 days old. Apply coatings with a roller or sprayer.

Acrylic Plastic—Can

Image of Product. Front orientation. Protective Coatings. Protective Coatings for Concrete Floors.

		Dry Time
Container Size, gal.	Solution Type	Touch, min.	Overall, day	Approx. Coverage, ft²	Mixing Req.	Max. Temp.	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	1	Water Based	60	3	300	No	Not Rated	50 to 90	Yes	Concrete	Satin Clear	7572T71	000000

Glare-Reducing Protective Coatings

Put a temporary dull finish on glossy surfaces to reduce glare during inspection. This acrylic plastic formula dries quickly without leaving permanent residue and wipes off easily.

Acrylic Plastic—Aerosol Can

		Dry Time										Each
Container Net Wt., oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp.	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		1-5	6-Up



	6	Solvent Based	15	24	9 ft² @ 1 mil	No	Not Rated	40 to 80	No	Plastic, Glass	Flat Clear	7972T4	000000	00000

Heavy Duty Epoxy Protective Coatings for Concrete Floors

These coatings are more durable than our standard coatings for concrete floors. They provide a stain-resistant finish that protects your floors from moisture, chemicals, foot traffic, and hand carts. Repair cracks and holes prior to application. Apply with a squeegee, roller, or sprayer. The size listed is the combined total of the two parts.

Epoxy—Can

Image of Product. Front orientation. Protective Coatings. Heavy Duty Epoxy Protective Coatings for Concrete Floors.

		Dry Time, hr.
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	1	Water Based	24	72	160 ft² @ 5 mil	Yes	2:1	2	250	50 to 90	No	Concrete	Gloss Clear	7844T7	0000000

Flame-Retardant Protective Coatings

Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Epoxy—Can

Image of Product. Front orientation. Protective Coatings. Flame-Retardant Protective Coatings.

Clear—Clear coatings are frequently used on wood—use one coat on sealed wood and two on unsealed. They can be used outside without breaking down, but prolonged exposure to UV light may cause them to yellow.

		Dry Time, hr.
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	Flammability Rating	For Use Outdoors	For Use On	Color		Each



	1	Water Based	8	48	150 ft² @ 10 mil	Yes	100:26	2.5	250	40 to 100	UL 94 V-0	Yes	Aluminum, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Composite, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	Gloss Clear	2557N2	0000000

Protective Coatings for Masonry

Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water. Use them in exterior, above-grade vertical surfaces to minimize deterioration and to prevent salt deposits and surface stains. Apply with a brush or sprayer.

Silicone Rubber—Jug

Image of Product. Front orientation. Protective Coatings. Protective Coatings for Masonry.

		Dry Time
Container Size, gal.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	1	Water Based	30	72	210 ft² @ 1 mil	No	90	50 to 90	Yes	Masonry, Concrete, Stone	Flat Clear	2394N1	000000

Powder Protective Coatings

More durable and scratch resistant than liquid paint, use this dry paint with your powder coating system. Apply directly to unpainted metal and heat-cure in an oven for a smooth, baked-on finish.

Polyester Plastic—Bag

Image of Product. Front orientation. Protective Coatings. Powder Protective Coatings.

		Dry Time, min.
Container Net Wt., oz.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	16	Solvent Based	10	10	68 ft² @ 2 mil	350	50 to 80	No	Aluminum, Brass, Bronze, Copper, Steel, Titanium, Iron	Gloss Clear	6356T201	000000

Low-Temperature Polyurethane Protective Coatings

Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention. Apply with a brush, roller, or sprayer. They're often used as a topcoat over epoxy coatings.

Polyurethane Rubber—Can

Clear—Clear coatings create a thin layer with an easy-to-clean finish that resists mold and mildew.

		Dry Time, hr.
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Primer Req. for Use On	Color		Each



	1	Solvent Based	5	6	465 ft² @ 2 mil	No	250	20 to 100	Yes	Aluminum, Steel, Iron, Galvanized Iron, Galvanized Steel, Concrete	Aluminum, Steel	Gloss Clear	7615T47	0000000

Accessories for Protective Coatings

Thinner (1 gal. Can)—Cannot Be Sold To CA, CO, CT, DE, MD, NH, NY, RI, UT, Canada—Thinners cannot be sold to the listed areas due to VOC (Volatile Organic Compounds) regulations.

		Each
Primer (1 gal. Can)	7615T31	0000000
Thinner (1 gal. Can)—Cannot Be Sold To CA, CO, CT, DE, MD, NH, NY, RI, UT, Canada	7615T25	00000

Low-Odor Heavy Duty Epoxy Protective Coatings for Concrete Floors

Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Epoxy—Can

Image of Product. Front orientation. Protective Coatings. Low-Odor Heavy Duty Epoxy Protective Coatings for Concrete Floors.

	Dry Time, hr.
Container Size, gal.	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, min.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	3/4	24	72 to 96	90 ft² @ 10 mil	Yes	2:1	20 to 30	250	50 to 100	Yes	Concrete	Gloss Clear	7682T25	0000000

Cure-and-Seal Protective Coatings for Concrete Floors

Seal freshly finished concrete to prevent it from drying too quickly during the curing process. These coatings also protect against mild chemicals, salts, soaps, and detergents. Apply with a brush, roller, or sprayer.

Acrylic Plastic—Pail

Image of Product. Front orientation. Protective Coatings. Cure-and-Seal Protective Coatings for Concrete Floors.

		Dry Time, hr.
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp.	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	5	Water Based	2.5	12	1,500 ft² @ 2 mil	No	Not Rated	40 to 90	Yes	Concrete	Gloss Clear	7572T49	0000000

Oil-Resistant Protective Coatings

Spray these coatings on glass to create a clear, scratch-resistant surface that repels oil and water. They’re also known as oleophobic and hydrophobic coatings. Good for use on machine windows to repel coolant for a clear view, they can also be used on exterior windows to help keep them clean. Coatings are made from nanoparticles of fumed silica, also known as quartz, suspended in a solvent. Spray them onto glass, fiberglass, and ceramic surfaces and spread with a cloth. Allow to dry overnight and buff for a thin, glass-like finish that protects against chemicals, such as acids, alkalies, coolant, fuel, and solvents.

Fumed Silica—Spray Bottle

		Dry Time
Container Size, fl. oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	3.4	Solvent Based	10	12	215 ft² @ 0.004 mil	No	480	40 to 75	Yes	Fiberglass, Ceramic, Glass	Clear	2615N1	000000

Corrosion-Resistant Reusable Peel-Away Protective Coatings for Metal

Protect tools, dies, and other parts during shipping and storage with these durable, removable coatings. After peeling, they leave a greasy film for continued corrosion protection. To apply, heat coating and dip the object. Once removed, coating can be melted again for repeat use.

Mineral Oil

Image of Product. Front orientation. Protective Coatings. Corrosion-Resistant Reusable Peel-Away Protective Coatings for Metal.

		Dry Time
Max. Indoor Protection Time, yr.	Solution Type	Touch, sec.	Overall, min.	Approx. Coverage @ Thk.	Mixing Req.	Melting Temp., ° F	For Use Outdoors	For Use On	Color		1 lb.	5 lb.	10 lb.



	10	Water Based	60	5	3 ft² @ 100 mil	No	360	No	Steel, Iron	Clear	7762T73	000000	000000	0000000

Heavy Duty Polyurethane Protective Coatings for Concrete Floors

Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures. Repair cracks and holes prior to application. Apply with a roller or sprayer. The size listed is the combined total of the two parts.

Polyurethane Rubber—Can

Image of Product. Front orientation. Protective Coatings. Heavy Duty Polyurethane Protective Coatings for Concrete Floors.

		Dry Time, hr.
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, min.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	2	Solvent Based	6	48	150 ft² @ 5 mil	Yes	1:1	30	200	35 to 135	Yes	Concrete	Gloss Clear	2747T2	0000000

Abrasion-Resistant Reusable Peel-Away Protective Coatings for Metal

Protect tools, dies, and other parts during shipping and storage with these durable peel-away coatings. They resist abrasion, moisture, and corrosion. To apply, heat coatings and dip the object. Once removed, coatings can be melted again for repeat use.

Acetate

Image of Product. Front orientation. Protective Coatings. Abrasion-Resistant Reusable Peel-Away Protective Coatings for Metal.

Water Based—Water-based coatings are the most durable peel-away coatings we offer.

Solvent Based—Solvent-based coatings won’t dry out, even when stored over a long time.

Max. Protection Time			Dry Time
Indoor, yr.	Outdoor	Solution Type	Touch, sec.	Overall, min.	Approx. Coverage @ Thk.	Mixing Req.	Melting Temp., ° F	Mil. Spec.	For Use Outdoors	For Use On	Color		1 lb.	5 lb.	10 lb.



	Not Rated	Not Rated	Solvent Based	90	4	3 ft² @ 1/16"	No	360	MIL-P-23242	Yes	Steel, Iron	Clear	7762T76	000000	000000	0000000


	10	—	Water Based	60	5	3 ft² @ 100 mil	No	350	—	No	Steel, Iron	Clear	7762T74	00000	00000	000000

Impact-Resistant Reusable Peel-Away Protective Coatings for Metal

These soft, pliable coatings add cushion and absorb shock. Use them to protect tools, dies, and other parts during shipping and storage. To apply, heat coatings and dip the object. Once removed, coatings can be melted again for repeat use.

Rubber

Image of Product. Front orientation. Protective Coatings. Impact-Resistant Reusable Peel-Away Protective Coatings for Metal.

Water Based—Water-based coatings have no odor and won’t leave an oily residue once removed.

Solvent Based—Solvent-based coatings won’t dry out, even when stored over a long time.

Max. Protection Time			Dry Time
Indoor, yr.	Outdoor	Solution Type	Touch, sec.	Overall, min.	Approx. Coverage @ Thk.	Mixing Req.	Melting Temp., ° F	For Use Outdoors	For Use On	Color		1 lb.	5 lb.	10 lb.



	Not Rated	Not Rated	Solvent Based	90	4	3 ft² @ 1/16"	No	360	Yes	Steel, Iron	Clear	7762T77	00000	000000	000000


	10	—	Water Based	90	5	3 ft² @ 100 mil	No	300	No	Steel, Iron	Clear	7762T75	0000	00000	00000

Protective Coatings for Grout

Spray these coatings on grout to form a barrier against dirt, water, mildew, and discoloration.

Silicone Rubber—Spray Bottle

Image of Product. Front orientation. Protective Coatings. Protective Coatings for Grout.

		Dry Time, hr.
Container Size, fl. oz.	Solution Type	Touch	Overall	Approx. Coverage, ft²	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Includes	Color		Each



	22	Water Based	2	24	200	No	80	50 to 80	No	Grout	Trigger Sprayer	Flat Clear	7219T22	000000

Flame-Retardant Protective Coatings for Wood

Use these coatings on structural lumber, decking, and wood shingles. Apply with a brush, pad, roller, or sprayer. Reapply every five years on exterior wood; coatings protect interior wood indefinitely. Once fully cured, they can be painted over with water-based paint.

Vinyl Plastic—Jug

		Dry Time, hr.
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage, ft²	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	1	Water Based	2	48	125	No	130	40 to 130	Yes	Wood	Clear	2559N1	000000

Vinyl Plastic—Pail

		Dry Time, hr.
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage, ft²	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each



	5	Water Based	2	48	625	No	130	40 to 130	Yes	Wood	Clear	2559N2	0000000