McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    19 Products

    Clevis Pins with Retaining Ring Groove

    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Clevis Pins with Retaining Ring Groove.
    Made for cramped assemblies under constant vibration. These pins come with a ring that snaps into a groove near one end, so they can’t slide out or shake loose. The ring also takes up less space than a cotter pin.
    These pins require retaining ring pliers to insert and remove the included ring.
    Steel
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Head,
    mm
    Usable
    Lg., mm
    Dia. Tolerance,
    mm
    Min.
    Hardness
    Lg.,
    mm
    Dia.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel with Retaining Ring
     
    6 mm Diameter
    18-0.070 to 0Rockwell B6320102592735A13100000
    23-0.070 to 0Rockwell B6325102592735A1320000
    28-0.070 to 0Rockwell B6330102592735A1330000
    33-0.070 to 0Rockwell B6335102592735A1340000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They're strong enough to fasten most components but won't withstand stress and vibration as well as steel.
    Head,
    mm
    Usable
    Lg., mm
    Dia. Tolerance,
    mm
    Min.
    Hardness
    Lg.,
    mm
    Dia.
    Ht.
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel with Retaining Ring
     
    6 mm Diameter
    23-0.070 to 0.01Rockwell B7025102592735A11100000
    28-0.070 to 0Rockwell B7030102592735A1120000
    33-0.070 to 0Rockwell B7035102592735A1130000
     

    Flat-Head Quick-Release Pins

    With no ring or handle to get caught on nearby components, these pins won’t pull out accidentally. The low profile makes them similar to basic clevis pins. Although the thin head fits in cramped spots, it also makes the pin harder to grab. A retaining ball holds pins in place once installed—pull to remove.
    Steel
    Image of Product. Front orientation. Contains Annotated. Quick-Release Pins. Flat-Head Quick-Release Pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Head,
    mm
    Usable
    Lg., mm
    Dia. at Extended
    Ball Ht., mm
    Dia.
    Ht.
    Single Shear Breaking
    Strength
    Min.
    Hardness
    Ball Material
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel
     
    6 mm Diameter
    66.7102Not RatedRockwell B60Stainless Steel
    		1090156A608000000
    106.7102Not RatedRockwell B60Stainless Steel
    		1090156A60900000
    196.7102Not RatedRockwell B60Stainless Steel
    		1090156A61100000
    246.7102Not RatedRockwell B60Stainless Steel
    		1090156A61200000
     

    Headless Clevis Pins with Retaining Ring Grooves

    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Headless Clevis Pins with Retaining Ring Grooves.
    Slide these pins out of cramped assemblies in either direction to add or remove parts. They come with two rings that snap into a groove at each end, so the pins can’t slide out or shake loose. The rings take up less space than cotter pins, so they won’t interfere with nearby moving parts. They’re often used with rod ends, hydraulic cylinders, and other pivoting components.
    These pins require retaining ring pliers to insert and remove the included rings.
    Steel
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Usable
    Lg., mm
    Dia. Tolerance,
    mm
    Min.
    Hardness
    Lg.,
    mm
    Each
    Zinc-Plated Carbon Steel with Retaining Ring
     
    6 mm Diameter
    12-0.050 to 0Rockwell B801893890A70900000
    20-0.050 to 0Rockwell B802693890A7110000
    24-0.050 to 0Rockwell B803093890A7120000
    30-0.050 to 0Rockwell B803693890A71300000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They're strong enough to fasten most components but won't withstand stress and vibration as well as steel.
    Usable
    Lg., mm
    Dia. Tolerance,
    mm
    Min.
    Hardness
    Lg.,
    mm
    Each
    18-8 Stainless Steel with Retaining Ring
     
    6 mm Diameter
    12-0.050 to 0Rockwell B801893890A732000000
    20-0.050 to 0Rockwell B802693890A73300000
    24-0.050 to 0Rockwell B803093890A73400000
    30-0.050 to 0Rockwell B803693890A73500000
     
    back to top