Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Designed for use in main lines with high contamination, these filters remove oil to extend the service life of air-powered tools and equipment.

A polyurethane bowl offers good chemical resistance for use with synthetic compressor oils and aggressive cleaning agents.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

With an activated carbon element, these filters remove all traces of oil vapor from your air lines, including odor. Joiner clamps connect these air filters into your Norgren setup.

Also known as coalescing filters, these filter elements fit in SMC modular compressed air filters to remove oil and particles.

Also known as coalescing filters, these filter elements fit in Norgren modular compressed air filters to remove oil and fine particles.

Also known as coalescing filters, these filter elements fit in Aventics modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in Festo modular compressed air filters to remove oil and particles as small as 0.01 microns.

Replace the filter element in your SMC modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets.

Replace the filter element in your Aventics modular compressed air filter to trap solid particles and water droplets.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.

Made of corrosion-resistant material, these filters withstand harsh environments where standard filters can break down and fail.

Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns.

Use these filters to extend the service life of air-powered tools and then throw them away when you're done.

Assembled, inspected, and packaged in a clean environment, these filters come sealed in antistatic double bags.

Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.

Replace a damaged bowl, swap it for a different material, or change the drain type in your Wilkerson modular compressed air filter.

Replace a damaged bowl on your Aventics modular compressed air filter.

Swap out a damaged bowl on your ARO modular compressed air filter, or switch to a different bowl material or drain type.

Produce clean air for instrumentation and other applications, such as food or medical device manufacturing.

Remove bacteria, viruses, moisture, and other particles from compressed air and gases used in food, pharmaceutical, biotech, and electronics applications.

These separators have higher flow rates compared to our other compressed air separators. Prevent equipment damage and wear caused by moisture in your compressed air supply. The first step in water removal, use one of these separators to remove the large amount of water created as compressed air cools.

In addition to removing large amounts of water, these separators also remove particles and oil droplets. Place them after your compressor and aftercooler, or at the point of use in applications that don't require an aftercooler.

Let these separators handle the dirty work of condensate disposal. These separators use two-stage filtration to cut oil content to under five parts per million.

Use these dryers with filters to protect air-powered tools from water, oil, oil vapor, and particles, then throw them away when you're done.

For an uninterrupted supply of clean, dry compressed air, these dryers have two desiccant towers. While desiccant in one tower absorbs moisture, the desiccant in the other is drying out, then they switch automatically.

Remove water and compressor oil from your air line to prevent damage to air-powered tools and equipment. The dryer and filter share the same cartridge to save space and reduce downtime when changing them.

Dry air without hassle—there’s no desiccant to change out with these dryers.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator stacked together, these filter/regulators clean your compressed air and maintain the pressure. Connect them to other ARO units in the same series with joiner clamps to customize your air preparation system.

A filter and regulator joined top-to-bottom, these filter/regulators provide clean, compressed air at the pressure you need. They connect to other Festo units of these same series with joiner clamps—even if the pipe sizes are slightly different—so you can customize your air preparation system.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

With ±0.8% accuracy, these filter/regulators react to smaller pressure changes than our other compressed air filter/regulators.

Built with a brass housing and a polyurethane bowl, these filter/regulators hold up to cleaning fluid, synthetic compressor oil, and other harsh chemicals.

Mount these filter/regulators to a 35 mm DIN rail with the included brackets. The filter and regulator are joined top-to-bottom, so they fit in the same space as a filter alone.

Connect these filter/regulators to your programmable logic controller (PLC) via IO-Link to remotely control the air pressure, monitor performance, and run diagnostics.