Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment. Joiner clamps connect these air filters into your Norgren setup.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Built to resist corrosion, these filters can withstand harsh environments that would cause standard filters to break down and fail.

A polyurethane bowl offers good chemical resistance for use with synthetic compressor oils and aggressive cleaning agents.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

Eliminate small traces of oil vapor and its associated odor with these filters and then throw them away when you're done.

Also known as coalescing filters, these filter elements fit in SMC modular compressed air filters to remove oil and particles.

Also known as coalescing filters, these filter elements fit in Wilkerson modular compressed air filters to remove oil and fine particles.

Also known as coalescing filters, these filter elements fit in Aventics modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in Festo modular compressed air filters to remove oil and particles as small as 0.01 microns.

Replace the filter element in your SMC modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets.

Replace the filter element in your Aventics modular compressed air filter to trap solid particles and water droplets.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air. Joiner clamps connect these air filters into your Parker setup.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.

Assembled, inspected, and packaged in a clean environment, these filters come sealed in antistatic double bags.

Protect small air-powered tools, such as impact wrenches, ratchet wrenches, grinders, and screwdrivers.

A polyurethane bowl provides good chemical resistance for use with synthetic compressor oils and cleaning fluids.

Quickly install these filters on your air line—no pipe nipples or joiner clamps required. Their push-to-connect fittings create tight seals around tubing.

No need to buy and service two filters—these filters have a single element that removes both oil and particles.

Replace a damaged bowl or change the bowl material or drain type on your Parker modular compressed air filter.

Replace a damaged bowl, or change the drain type on your Festo modular compressed air filter.

Replace a damaged bowl on your Aventics modular compressed air filter.

Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.

Remove bacteria, viruses, moisture, and other particles from compressed air and gases used in food, pharmaceutical, biotech, and electronics applications.

These separators have higher flow rates compared to our other compressed air separators. Prevent equipment damage and wear caused by moisture in your compressed air supply. The first step in water removal, use one of these separators to remove the large amount of water created as compressed air cools.

In addition to removing large amounts of water, these separators also remove particles and oil droplets. Place them after your compressor and aftercooler, or at the point of use in applications that don't require an aftercooler.

Let these separators handle the dirty work of condensate disposal. These separators use two-stage filtration to cut oil content to under five parts per million.

Use these dryers with filters to protect air-powered tools from water, oil, oil vapor, and particles, then throw them away when you're done.

With a polyurethane bowl and housing, these dryers resist synthetic compressor lubricants, solvents, acids, and other chemicals in your compressed air line. They have a clear bowl so you can monitor contents and the desiccant, which changes color when it needs to be replaced.

Install these dryers just before air-powered tools as final protection from water and particles and throw them away when you’re done.

These all-in-one dryers with filters eliminate the need for individual dryers and filters. They cool air through refrigeration to condense water vapor for removal.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

Connect these filter/regulators to other Aventics units of the same series with joiner clamps to customize your air preparation system. A filter and regulator joined top-to-bottom, they provide clean, compressed air at the pressure you need.

Built to resist corrosion, these filter/regulators withstand harsh environments that would cause standard filter/regulators to break down and fail.

No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.

Mount these filter/regulators to a 35 mm DIN rail with the included brackets. The filter and regulator are joined top-to-bottom, so they fit in the same space as a filter alone.

Push filtered, stable compressed air downstream to your system—even when your double-acting cylinder sends a rush of reverse airflow. These filter/regulators have a check valve that blocks backflow to protect the internal components of the regulator.

An SMC filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.

Distribute compressed air to multiple locations from a single source.