These gloves have a metal additive that will set off metal detectors if they fall into your line, so you can safely handle food and tools in a sanitary facility. They help you comply with Hazard Analysis and Critical Control Point (HACCP) programs for preventing contaminated food from leaving your facility. They’re also bright blue, which makes them easy to find and retrieve.

Fully coated in nitrile, these gloves are oil and chemical resistant, so they won’t break down from fatty foods or harsh cleaners. Nitrile is a good alternative for those with latex allergies—it’s also more durable than latex. The texture helps you grip tools and work surfaces, and the seamless cotton lining keeps you comfortable. These gloves meet EN 388 (3121), which means they protect you from abrasive surfaces and provide light protection against cuts, tears, and punctures. They also meet German food standard 31 LFGB, which means they are compliant with European regulatory requirements and free of toxic substances.

Minimize hand fatigue while operating rivet guns, jackhammers, and other power tools that produce high levels of vibration. All have shock-absorbing rubber padding that covers the palm and fingers.

The coating on these gloves provides extra protection and wear resistance. All meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade.

Kevlar aramid gloves absorb moisture. Kevlar aramid/nylon/spandex blend gloves have excellent flexibility. Polyethylene/fiberglass/steel blend gloves are designed with strong yet lightweight fibers that resist abrasion. Polyethylene/Kevlar aramid blend gloves combine the cut resistance of Kevlar with lightweight polyethylene for comfort. Dyneema gloves are thinner, more breathable, and more form fitting than Kevlar gloves.

Palm-coated gloves have an uncoated back side that makes the gloves more comfortable and breathable. Fully coated gloves provide the same protection for the front and back of the hand.

Nitrile-coated gloves are oil resistant and have better abrasion resistance than other coated gloves. Latex-coated gloves are water resistant. Polyurethane-coated gloves offer good tactility for precision handling and delicate tasks. PVC-coated gloves provide a good grip in dry as well as wet and oily conditions.

Style A provide cut protection without hindering dexterity. They are textured to provide added grip. For a secure fit, they have a knit cuff.

Style B have extra reinforcement between the thumb and forefinger for extended wear resistance. They are textured for an improved grip. A knit cuff provides a secure fit.

Style C are suitable for working with oily heavy metal parts with sharp, rough edges. They have a smooth surface. Open cuffs make them convenient to put on and take off.

Style D have a longer cuff for additional forearm protection. An open cuff style makes them convenient to put on and take off. For additional grip, they are textured.

In addition to being reinforced, the palms are coated to protect against punctures from objects such as needles and syringes. All meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade.

Bumpers on the back of these gloves protect your hands from impact when working in confined spaces. All meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade.

Often used on machine assembly jobs where protection against oil and cuts is essential, these gloves are thin enough for precision work. They resist tearing and degradation from oil and grease. All of these gloves meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade.

Nitrile-coated gloves have a layer of rubber on the palm for added comfort.

Use gloves with knit cuffs for a secure fit.

These gloves meet NFPA 70E for protection against arc-flash hazards. They are made with materials that protect against radiant heat and flames. All meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade.

Safeguard hands from cold objects as well as cold weather. These gloves remain flexible in low temperatures and have a thermal liner. All meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade.

Also known as wave solder gloves, wear these to avoid damaging static-sensitive electronic parts. They have a nitrile coating that protects hands while soldering.

Protect your hands from oil, acids, and scrapes while you’re working.

Nitrile gloves withstand deterioration from petroleum products and solvents such as alcohol.

Neoprene-coated latex gloves have a multi-layer construction that provides better protection against tears and pinholes than most single-layer gloves. Suitable for light duty jobs, they deteriorate faster than neoprene gloves.

Neoprene-coated neoprene gloves have a double-dipped construction for more abrasion resistance than neoprene-coated latex gloves.

Wear-indicating gloves have a yellow, blue, or red inner layer that shows through as the coating wears off, making it easy to inspect for cracks, pinholes, and other signs of wear.

Textured gloves provide a better grip than smooth gloves.

Gloves without a lining offer the best dexterity. Gloves with a flocked cotton fiber lining are easy to take on and off. Gloves with a cotton fabric lining and fleece fabric lining absorb perspiration.

The coating on these gloves provides extra grip and protection without limiting dexterity. They provide light abrasion resistance and have a fluorescent yellow back side that makes them easy to spot.