McMaster-Carr logo
    Filter by
    System of Measurement
    Primer Required for Use On
    Appearance
    Mixing Required
    For Use Outdoors
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    78 Products

    Protective Coatings

    Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
    Rubber—Aerosol Can
    Image of Product. Front orientation. Protective Coatings. Protective Coatings, Rubber—Aerosol Can.
    Rubber coatings withstand salt and acids.
    Cannot Be Sold Outside United States—Coatings that cannot be sold outside of the United States do not meet product labeling requirements. VOC (Volatile Organic Compounds) regulations restrict sales to the listed jurisdictions/areas.
    Sealant Primers—Although sealant primer is not required for use on all materials, it can be used to prepare any surface to maximize the life of the coating. They cannot be sold outside of the United States due to product regulations.
    Topcoats—Apply topcoat to give coated surfaces a glossy finish that resists fading. They cannot be sold outside of the United States due to product regulations.
    Coatings
    Sealant Primers
    Topcoats
    Dry Time
    Each
    Container
    Net Wt., oz.
    Solution
    Type
    Touch,
    min.
    Overall,
    hr.
    Approx. Coverage
    @ Thk.
    Mixing
    Req.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    For Use
    Outdoors
    For Use On
    Primer Req.
    for Use On
    Cannot Be Sold To
    Choose a Color
    1-5
    6-Up
    Cannot Be Sold To
    Each
    Each
    11Solvent Based40246 ft² @ 5 milNo20065 to 85YesSteel, Iron, Plastic, Wood, FabricSteel, IronOutside United StatesSemi-Gloss Black, Semi-Gloss Clear, Semi-Gloss Red, Semi-Gloss White9560T4000000000000Outside United States9560T820000009560T2000000
     
    Rubber—Can
    Image of Product. Front orientation. Protective Coatings. Protective Coatings, Rubber—Can.
    Rubber coatings withstand salt and acids.
    Coatings in a can can be dipped, brushed, or sprayed.
    Cannot Be Sold Outside United States—Coatings that cannot be sold outside of the United States do not meet product labeling requirements. VOC (Volatile Organic Compounds) regulations restrict sales to the listed jurisdictions/areas.
    Sealant Primers—Although sealant primer is not required for use on all materials, it can be used to prepare any surface to maximize the life of the coating. They cannot be sold outside of the United States due to product regulations.
    Topcoats—Apply topcoat to give coated surfaces a glossy finish that resists fading. They cannot be sold outside of the United States due to product regulations.
    Coatings
    Sealant Primers
    Topcoats
    Dry Time
    Container
    Size, fl. oz.
    Solution
    Type
    Touch,
    min.
    Overall,
    hr.
    Approx. Coverage
    @ Thk.
    Mixing
    Req.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    For Use
    Outdoors
    For Use On
    Primer Req.
    for Use On
    Cannot Be Sold To
    Choose a Color
    Each
    Cannot Be Sold To
    Each
    Each
    14.5Solvent Based402410 ft² @ 5 milNo20065 to 85YesSteel, Iron, Plastic, Wood, FabricSteel, IronOutside United StatesSemi-Gloss Black, Semi-Gloss Blue, Semi-Gloss Red, Semi-Gloss Yellow9560T7000000Outside United States9560T820000009560T2000000
     

    Air Brush Paint

    Image of Product. Front orientation. Paint. Air Brush Paint.
    Unlike paint that must be diluted, this paint comes ready for use with an air brush. Its water-based formula can be cleaned up with soap and water, so air brushes are easy to keep clean.
    Dry Time
    Container
    Size, fl. oz.
    Solution
    Type
    Touch,
    min.
    Overall,
    hr.
    Approx. Coverage
    @ Thk.
    Max.
    Temp.
    For Use
    Outdoors
    For Use
    On
    Choose a Color (Appearance)
    Each
    Acrylic Plastic—Bottle
    1Water Based20242 ft² @ 1 milNot RatedYesFabricBlack (Satin), Blue (Satin), Green (Satin), Red (Satin), White (Satin), Yellow (Satin)7867T500000
     

    Contact Adhesives

    Image of Product. Front orientation. Contact Adhesives. Contact Adhesives, Can.
    Image of Product. Front orientation. Contact Adhesives. Contact Adhesives, Applicator-Top Can.

    Can

    Applicator-Top Can

    Apply these adhesives on two surfaces, air dry, and then bring together to bond.
    Cannot Be Sold To—Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
    Container
    Mfr. Model
    No.
    Size
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength
    Shear Strength,
    psi
    Cure Type
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    Color
    For Joining
    Cannot Be Sold To
    Each
    3M
    109932 fl. oz.Can4072 hr.3,405Room TemperatureThick Liquid3,000-10 to 230BeigeFabric, Foam, Plastic, Rubber—75285A68000000
    10991 gal.Can4072 hr.3,405Room TemperatureThick Liquid3,000-10 to 230BeigeFabric, Foam, Plastic, Rubber—75285A73000000
    447532 fl. oz.Can1072 hr.Not RatedRoom TemperatureThick Liquid8,500-10 to 230ClearCeramic, Fabric, Glass, Plastic, RubberAlexandria, VA; Arlington County, VA; Connecticut; Delaware; District of Columbia; Fairfax County, VA; Fairfax, VA; Falls Church, VA; Los Angeles County, CA; Loudoun County, VA; Maine; Manassas Park, VA; Manassas, VA; Maryland; Massachusetts; New Jersey; New York; Orange County, CA; Pennsylvania; Prince William County, VA; Rhode Island; Riverside County, CA; San Bernardino County, CA; Stafford County, VA; Utah; Vermont75285A65000000
     
    Pliobond
    358 fl. oz.Applicator-Top Can314 day1,200Room TemperatureThick Liquid6,500-40 to 370BeigeCardboard, Fabric, Foam, Wood—7468A5300000
    3516 fl. oz.Can314 day1,200Room TemperatureThick Liquid6,500-40 to 370BeigeCardboard, Fabric, Foam, Wood—7468A5400000
    3532 fl. oz.Can314 day1,200Room TemperatureThick Liquid6,500-40 to 370BeigeCardboard, Fabric, Foam, Wood—7468A5100000
    351 gal.Can314 day1,200Room TemperatureThick Liquid6,500-40 to 370BeigeCardboard, Fabric, Foam, Wood—7468A52000000
     
    Other Contact Adhesives
    —4 fl. oz.Applicator-Top Can224 hr.Not RatedRoom TemperatureThin Liquid1,200-30 to 150ClearCopper, Fabric, Foam, Rubber, Steel, Wood—7507A100000
    —8 fl. oz.Applicator-Top Can224 hr.Not RatedRoom TemperatureThin Liquid1,200-30 to 150ClearCopper, Fabric, Foam, Rubber, Steel, Wood—7507A200000
    —16 fl. oz.Applicator-Top Can224 hr.Not RatedRoom TemperatureThin Liquid1,200-30 to 150ClearCopper, Fabric, Foam, Rubber, Steel, Wood—7507A300000
    —32 fl. oz.Applicator-Top Can224 hr.Not RatedRoom TemperatureThin Liquid1,200-30 to 150ClearCopper, Fabric, Foam, Rubber, Steel, WoodLos Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA7507A400000
    —1 gal.Can224 hr.Not RatedRoom TemperatureThin Liquid1,200-30 to 150ClearCopper, Fabric, Foam, Rubber, Steel, WoodLos Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA7507A5000000
     

    Fabric Coatings

    Image of Product. Front orientation. Fabric Coatings. Fabric Coatings.
    Repel spills and block stains without changing the look of fabric or upholstery.
    Dry
    Time, hr.
    Mfr. Model
    Name
    Container
    Net Wt., oz.
    Container
    Type
    Solution
    Type
    Approx.
    Coverage
    Touch
    Overall
    Max. Temp.,
    ° F
    For Use
    On
    Color
    Each
    3M
    Scotchgard10Aerosol CanSolvent BasedNot Rated624120FabricClear71315K41000000
     

    UV-Resistant Fabric Coatings

    Image of Product. Front orientation. Fabric Coatings. UV-Resistant Fabric Coatings, Spray Bottle.
    Image of Product. Front orientation. Fabric Coatings. UV-Resistant Fabric Coatings, Jug.

    Spray

    Bottle

    Jug

    Stop fabric from fading in the sun. These coatings also protect against spots, spills, and stains.
    Container
    Dry
    Time, hr.
    Size
    Type
    Solution
    Type
    Approx. Coverage,
    ft²
    Touch
    Overall
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    For Use
    On
    Includes
    Color
    Each
    32 fl. oz.Spray BottleSolvent Based37547212060 to 110FabricTrigger SprayerClear78915T34000000
    1 gal.JugSolvent Based1,50047212060 to 110Fabric—Clear78915T3800000
     

    Quick-Set Epoxy Structural Adhesives

    Image of Product. Bottle. Front orientation. Bottle.
    Image of Product. Cartridge. Front orientation. Cartridge.
    Image of Product. Syringe. Front orientation. Syringe.

    Bottle

    Cartridge

    Syringe

    For quick repairs, these epoxies begin to harden in six minutes or less. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength
    Shear,
    psi
    Peel, lbf/in.
    wd.
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    For Joining
    Each
    J-B Weld
     
    PlasticWeld
    501320.85Syringe560 min.2,000Not Rated1:1Thick Liquid9,000-20 to 300Composite, Masonry, Metal, Plastic, Rubber, Wood7605A500000
     
    Devcon
     
    5 Minute Epoxy
    1420015Bottle512 hr.1,90021:1Thick Liquid10,000-40 to 200Masonry, Metal, Plastic, Wood7524A400000
    142500.84Syringe512 hr.1,90021:1Thick Liquid10,000-40 to 200Masonry, Metal, Plastic, Wood7541A7600000
    142701.69Cartridge512 hr.1,90021:1Thick Liquid10,000-40 to 200Masonry, Metal, Plastic, Wood66215A3100000
     

    Glue

    Use these glues for general purpose bonding and repairs.
    Glue Sticks
    Image of Product. Front orientation. Glue. Glue.
    Container
    Each
    Package
    Net Wt.,
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, hr.
    Max. Temp.,
    ° F
    Color
    For Joining
    Each
    Pkg.
    Qty.
    Pkg.
    0.77Stick1012150ClearCardboard, Fabric66285A7400000666285A84000000
    3M Glue in Aerosol Cans
    Image of Product. Front orientation. Glue. Glue, 3M.
    Cannot Be Sold to California—3M glue cannot be sold to California due to local regulatory limits on VOCs (volatile organic compounds).
    Container
    Each
    Package
    Mfr. Model
    No.
    Net Wt.,
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, hr.
    Max. Temp.,
    ° F
    Color
    For Joining
    Cannot Be
    Sold To
    Each
    Pkg.
    Qty.
    Pkg.
    2713Aerosol Can1524140ClearFabric, Metal, Plastic, Rubber, WoodCalifornia7610A253000000127610A5530000000

    Low-Odor Instant-Bond Adhesives

    Image of Product. Bottle. Front orientation. Instant-Bond Adhesives. Low-Odor Instant-Bond Adhesives.

    Bottle

    Form bonds without the noticeable odor other instant-bond adhesives leave behind.
    Apply an accelerator first to reach a full-strength bond faster.
    Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
    Thick Liquid—Fill larger gaps than thin-liquid adhesives, so they're better for bonding slightly misaligned or uneven surfaces.
    Container
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, hr.
    Consistency
    Viscosity,
    cP
    Max. Gap
    Size Filled
    Temp. Range,
    ° F
    For Joining
    Each
    Loctite®
    4030.7Bottle5024Thick Liquid1,3800.008"-65 to 200Cardboard, Composite, Fabric, Metal, Plastic, Rubber, Wood74765A53000000
    4600.7Bottle5024Thin Liquid400.004"-65 to 200Cardboard, Composite, Fabric, Metal, Plastic, Rubber, Wood74765A5200000
    46016Bottle5024Thin Liquid400.004"-65 to 200Cardboard, Composite, Fabric, Metal, Plastic, Rubber, Wood74765A48000000
     

    Glue Shapes

    These small tabs of pressure-sensitive adhesive offer convenient, no-mess bonding.
    Discs
    Image of Product. Front orientation. Mounting Adhesives. Glue Shapes, Discs.
    Dia.
    Thk.
    Consistency
    Temp. Range,
    ° F
    Color
    For Joining
    Pkg.
    Qty.
    Pkg.
    3/8"0.014"Gel20 to 140YellowCeramic, Fabric, Wood1,0007187A33000000

    Skin-Safe Instant-Bond Adhesives

    Image of Product. Front orientation. Instant-Bond Adhesives. Skin-Safe Instant-Bond Adhesives.
    Protect your skin and prevent glue burns when making quick, permanent bonds. These adhesives bond instantly to a variety of materials, but they won't begin to harden on skin right away.
    Apply an accelerator first to reach a full-strength bond faster.
    Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
    Container
    Size, fl.
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, hr.
    Consistency
    Viscosity,
    cP
    Max. Gap
    Size Filled
    Temp. Range,
    ° F
    For Joining
    Each
    0.07Tube1024Thin Liquid400.006"-65 to 160Ceramic, Fabric, Metal, Plastic, Rubber, Wood66185A1100000
     

    Urethane Structural Adhesives

    Image of Product. Syringe. Front orientation. Syringe.

    Syringe

    Urethanes are the most flexible adhesives, so they bond dissimilar materials and damp vibration.
    Some of these adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    For Joining
    Each
    J-B Weld
     
    Plastic Bonder
    501390.85Syringe611,000Not Rated1:1Thick Liquid50,000-20 to 250Composite, Masonry, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Masonry, Plastic to Rubber, Rubber to Composite, Rubber to Masonry7605A600000
     

    Waterproof Epoxy Structural Adhesives

    Image of Product. Syringe. Front orientation. Syringe.

    Syringe

    Even when used underwater, these adhesives maintain their strength. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.
    These epoxies come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    For Joining
    Each
    J-B Weld
     
    MarineWeld
    501720.85Syringe511,800Not Rated1:1Paste100,000-20 to 300Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood7605A7000000
     

    Flexible Instant-Bond Adhesives

    Image of ProductInUse. Front orientation. Instant-Bond Adhesives. Flexible Instant-Bond Adhesives.
    Create bonds that can bend without breaking. These adhesives remain elastic even after hardening.
    Apply an accelerator first to reach a full-strength bond faster.
    Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
    Thick Liquid—Fill larger gaps than thin-liquid adhesives, so they're better for bonding slightly misaligned or uneven surfaces.
    ISO 10993—Comply with biocompatibility standards for medical-grade applications.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Container
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, hr.
    Consistency
    Viscosity,
    cP
    Max. Gap
    Size Filled
    Elongation
    Temp. Range,
    ° F
    Specs.
    Met
    For Joining
    Each
    Loctite®
    48510.7Bottle2024Thin Liquid3800.006"85%-65 to 120ISO 10993Composite, Fabric, Metal, Plastic, Rubber74795A73000000
    48610.7Bottle2024Thick Liquid4,2500.008"85%-65 to 120ISO 10993Composite, Fabric, Metal, Plastic, Rubber74795A7400000
     

    Quick-Set Wicking Instant-Bond Adhesives

    Image of Product. Bottle. Front orientation. Instant-Bond Adhesives. Quick-Set Wicking Instant-Bond Adhesives.

    Bottle

    Bond parts that are already installed in half the time of our other wicking instant-bond adhesives. Our thinnest adhesives use capillary action to pull themselves deep into close-fitting seams—like water up the roots of a tree.
    Apply an accelerator first to reach a full-strength bond faster.
    Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
    Container
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, hr.
    Consistency
    Viscosity,
    cP
    Max. Gap
    Size Filled
    Temp. Range,
    ° F
    Specs. Met
    For Joining
    Each
    Loctite®
    45010.7Bottle524Thin Liquid200.004"-65 to 180—Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood74795A72000000
     
    3M Scotch-Weld
    SF200.7Bottle424Thin Liquid200.004"-65 to 180Fed. Spec. A-A-3097Fabric, Plastic, Rubber, Wood75445A2300000
     

    Instant-Bond Adhesives

    Image of Product. Bottle. Front orientation. Instant-Bond Adhesives.

    Bottle

    Create strong, permanent bonds in 75 seconds or less. Also known as super glue, these adhesives are ideal for fast assembly and repair.
    Apply an accelerator first to reach a full-strength bond even faster.
    Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
    Thick Liquid—Fill larger gaps than thin-liquid adhesives, so they're better for bonding slightly misaligned or uneven surfaces.
    ISO 10993—Comply with biocompatibility standards for medical-grade applications.
    Container
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, hr.
    Consistency
    Viscosity,
    cP
    Max. Gap
    Size Filled
    Temp. Range,
    ° F
    Specs.
    Met
    For Joining
    Each
    Loctite®
    4010.1Tube1524Thin Liquid1100.005"-65 to 250—Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood74765A6300000
    4010.7Bottle1524Thin Liquid1100.005"-65 to 250—Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood74765A3300000
    40116Bottle1524Thin Liquid1100.005"-65 to 250—Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood74765A85000000
    40110.7Bottle1524Thin Liquid1200.005"-65 to 180ISO 10993Cardboard, Fabric, Metal, Plastic, Rubber, Wood1818A400000
    44710.7Bottle1524Thin Liquid6300.008"-65 to 180—Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood74765A3400000
    447116Bottle1524Thin Liquid6300.008"-65 to 180—Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood74765A75000000
     
    Permabond
    2401Bottle1524Thick Liquid1,8500.017"-65 to 180—Cardboard, Composite, Fabric, Metal, Plastic, Rubber, Wood7580A8500000
     

    High-Temperature Glue

    Image of Product. Front orientation. Glue. High-Temperature Glue, Bottle.
    Image of Product. Front orientation. Glue. High-Temperature Glue, Pail.

    Bottle

    Pail

    This high-temperature glue sticks quickly, but can be repositioned for up to 2 hours before it begins to harden. Glue can be applied and allowed to dry, then reactivated with water when ready for bonding.
    Cannot Be Sold to Canada—Glue cannot be sold to Canada due to import regulations.
    Container
    Temp.,
    ° F
    Size
    Type
    Begins to
    Harden, hr.
    Reaches Full
    Strength, hr.
    Consistency
    Min.
    Max.
    Color
    For Joining
    Cannot Be
    Sold To
    Each
    32 fl. oz.Bottle212Thick Liquid-30500BeigeCardboard, Fabric, Glass, Metal, WoodCanada7466A7000000
    1 gal.Pail212Thick Liquid-30500BeigeCardboard, Fabric, Glass, Metal, WoodCanada7466A8000000
    5 gal.Pail212Thick Liquid-30500BeigeCardboard, Fabric, Glass, Metal, WoodCanada7466A9000000
     

    Impact-Resistant Instant-Bond Adhesives

    Image of Product. Front orientation. Instant-Bond Adhesives. Impact-Resistant Instant-Bond Adhesives.
    Mixed with rubber for resilient bonds that withstand sudden stress, shock, and vibration.
    Apply an accelerator first to reach a full-strength bond faster.
    Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
    ISO 10993—Comply with biocompatibility standards for medical-grade applications.
    Container
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, hr.
    Consistency
    Viscosity,
    cP
    Max. Gap
    Size Filled
    Temp. Range,
    ° F
    Specs.
    Met
    For Joining
    Each
    Loctite®
    4350.7Bottle3024Thin Liquid1800.006"-65 to 220ISO 10993Cardboard, Composite, Fabric, Metal, Plastic, Rubber, Wood74765A23000000
    43516Bottle3024Thin Liquid1800.006"-65 to 220ISO 10993Cardboard, Composite, Fabric, Metal, Plastic, Rubber, Wood74765A76000000
    4380.7Bottle3024Thin Liquid1800.006"-65 to 220—Cardboard, Composite, Fabric, Metal, Plastic, Rubber, Wood74765A2400000
     

    Instant-Bond Adhesives for Hard-to-Bond Materials

    Image of Product. Front orientation. Instant-Bond Adhesives. Instant-Bond Adhesives for Hard-to-Bond Materials.
    Join plastics that standard instant-bond adhesives can't grip. These adhesives stick to smooth materials, such as polyethylene and polypropylene. Clean and prepare the surface with primer so the adhesive can spread, dry, and gain strength.
    Add an accelerator after the primer and before the adhesive to reach a full-strength bond faster.
    Cartridge—Apply with a caulk gun.
    Syringe—Apply with a dispensing gun.
    Gel—Flow more slowly than liquid and stick in place without dripping, even on vertical surfaces. Use when making a mess isn't an option.
    ISO 10993—Comply with biocompatibility standards for medical-grade applications.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Container
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, hr.
    Consistency
    Viscosity,
    cP
    Max. Gap
    Size Filled
    Temp. Range,
    ° F
    Specs.
    Met
    For Joining
    Each
    Loctite®
    4540.1Tube1524Gel29,0000.01"-65 to 250—Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood74765A6500000
    4540.3Syringe1524Gel29,0000.01"-65 to 250—Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood74765A8700000
    4540.7Tube1524Gel29,0000.01"-65 to 250—Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood74765A3500000
    4541Syringe1524Gel29,0000.01"-65 to 250—Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood74765A2800000
    4547Tube1524Gel29,0000.01"-65 to 250—Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood74765A88000000
    45410.5Cartridge1524Gel29,0000.01"-65 to 250—Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood74765A29000000
    45410.3Syringe1524Gel29,0000.01"-65 to 180ISO 10993Cardboard, Fabric, Metal, Plastic, Rubber, Wood1818A4900000
    45410.7Tube1524Gel29,0000.01"-65 to 180ISO 10993Cardboard, Fabric, Metal, Plastic, Rubber, Wood1818A49100000
     
    3M Scotch-Weld
    SI Gel0.7Tube2024Gel125,0000.02"-65 to 180—Fabric, Plastic, Rubber, Wood75445A2600000
     

    Goo Gone Paint and Coating Removers

    Clean up water-based paint messes without damaging the surface underneath. In addition to wet and dry paint, these cleaners also remove varnish, shellac, and caulk. They cling to vertical surfaces, such as wood baseboards and trim, to easily remove spills and splatter. Use them on floors, brushes, tools, and ladders as well.
    Note: Not for use on painted surfaces or PVC.
    Spray Bottles
    Image of Product. Front orientation. Paint and Coating Removers. Goo Gone Paint and Coating Removers.
    Cannot Be Sold To—Removers that cannot be sold to the listed regions are restricted by product labeling requirements and/or import regulations.
    Each
    Package
    Container
    Size, fl. oz.
    Solution
    Type
    Harshness
    For Use On
    For Removing
    Cannot Be
    Sold To
    Each
    Pkg.
    Qty.
    Pkg.
    Liquids
    24Water BasedModerateAluminum, Carpet, Ceramic, Chrome, Fabric, Fiberglass, Galvanized Steel, Glass, Iron, Plastic, Porcelain, Stainless Steel, Steel, Stone, Vinyl Plastic, Waxed FloorsCaulk, Sealants, Latex-Based PaintCanada7984T33900000047984T875000000
     

    Hot Glue Sticks

    When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds.
    Adhesives that take longer to harden are suited for applications that require some repositioning, because the longer open times allow for more adjustment. For high-volume applications, adhesives with a lower viscosity flow faster than other hot-melt adhesives.
    3M Scotch-Weld
    Image of Product. Front orientation. Hot Glue. Hot Glue Sticks.
    3M glue sticks work only with 3M glue guns.
    Model Number 3792LM—3792LM are low-temperature formulations, which work well on delicate or heat-sensitive materials.
    Mfr. Model
    No.
    For 3M Gun
    Model No.
    Dia.
    Lg.
    Begins to
    Harden, sec.
    Reaches Full
    Strength, hr.
    Application
    Temp. Range, ° F
    Consistency
    Viscosity,
    cP
    Elongation
    Color
    For Joining
    Approx. No. of
    Sticks per lb.
    1 lb.
    11
    lb.
    3792LMEC, TC/TC-Q LT5/8"8"4024250 to 270Thick Liquid10,500400%ClearFabric, Plastic, Rubber, Wood157464A790000000000000
    3792LMLT, TC/TC-Q LT5/8"2"4024250 to 270Thick Liquid10,500400%ClearFabric, Plastic, Rubber, Wood557464A7800000000000

    Cement for Abrasive Grains

    Image of Product. Front orientation. Adhesive Cement. Cement for Abrasive Grains.
    Coat cotton, canvas, and felt buffing wheels with this cement, then apply abrasive grains.
    Container
    Temp.
    Size,
    gal.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Viscosity
    Min.
    Max.
    Color
    For
    Joining
    Each
    1Pail3024Thin LiquidNot RatedNot RatedNot RatedBrownFabric4796A1000000

    Flexible Hot Glue Sticks

    Image of Product. Front orientation. Hot Glue. Flexible Hot Glue Sticks.
    Remaining flexible after curing, these glue sticks accommodate joint movement. All are FDA compliant 21 CFR 175.105 and suitable for food packaging.
    Dia.
    Lg.
    Begins to
    Harden, sec.
    Reaches Full
    Strength, hr.
    Application
    Temp. Range, ° F
    Consistency
    Viscosity,
    cP
    Elongation
    Color
    Food Industry Std.
    For Joining
    Approx. No. of
    Sticks per lb.
    1 lb.
    5 lb.
    25
    lb.
    7/16"10"6024350 to 390Thick Liquid5,3751,300%ClearFDA Compliant 21 CFR 175.105Ceramic, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood187518A510000000000000000000

    Quick-Set Contact Adhesives

    Image of Product. Front orientation. Contact Adhesives. Quick-Set Contact Adhesives.
    Bonds reach full strength in 10 minutes. Apply adhesive to one or both surfaces, then bring together to bond. For nonporous surfaces, air dry before bonding.
    Material Certificate Icon
    Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Container
    Mfr. Model
    No.
    Size,
    gal.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, min.
    Shear Strength,
    psi
    Cure Type
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    Color
    For Joining
    Each
    3M
    1000NF1Jug6010400Room TemperatureThin Liquid75060 to 80PurpleFabric, Foam, Wood75285A120000000
     

    Nonflammable Contact Adhesives

    Image of Product. Front orientation. Contact Adhesives. Nonflammable Contact Adhesives.
    Bond porous materials with these low-odor, nonflammable adhesives. Apply to both surfaces, air dry, and then bring together to bond.
    Container
    Size
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Shear
    Strength
    Cure Type
    Consistency
    Viscosity
    Temp. Range,
    ° F
    Color
    For Joining
    Each
    Weldwood
    32 fl. oz.Can3072Not RatedRoom TemperatureThick LiquidNot Rated-40 to 180AmberCardboard, Composite, Fabric, Wood7514A24000000
    1 gal.Can3072Not RatedRoom TemperatureThick LiquidNot Rated-40 to 180AmberCardboard, Composite, Fabric, Wood7514A2500000
     

    Quick-Set Instant-Bond Adhesives

    Image of Product. Bottle. Front orientation. Instant-Bond Adhesives. Quick-Set Instant-Bond Adhesives.

    Bottle

    Minimize downtime during joint assembly and repair. These adhesives form bonds in five seconds or less—up to 15 times faster than standard instant-bond adhesives.
    Apply an accelerator first to reach a full-strength bond even faster.
    Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
    Container
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, hr.
    Consistency
    Viscosity,
    cP
    Max. Gap
    Size Filled
    Temp. Range,
    ° F
    Specs. Met
    For Joining
    Each
    3M Scotch-Weld
    SF1000.1Tube424Thin Liquid800.006"-65 to 180Fed. Spec. A-A-3097Fabric, Plastic, Rubber, Wood75445A2400000
    SF1000.7Bottle424Thin Liquid800.006"-65 to 180Fed. Spec. A-A-3097Fabric, Plastic, Rubber, Wood75445A2500000
     

    Wicking Instant-Bond Adhesives

    Image of Product. Bottle. Front orientation. Instant-Bond Adhesives. Wicking Instant-Bond Adhesives.

    Bottle

    Create secure bonds between parts that are already installed. Our thinnest adhesives use capillary action to pull themselves deep into close-fitting seams—like water up the roots of a tree.
    Apply an accelerator first to reach a full-strength bond faster.
    Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
    Container
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, hr.
    Consistency
    Viscosity,
    cP
    Max. Gap
    Size Filled
    Temp. Range,
    ° F
    For Joining
    Each
    Loctite®
    4060.7Bottle1524Thin Liquid200.004"-65 to 250Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood74765A32000000
    40616Bottle1524Thin Liquid200.004"-65 to 250Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood74765A37000000
     

    Fast-Hardening Hot Glue Sticks

    Image of Product. Front orientation. Hot Glue. Fast-Hardening Hot Glue Sticks.
    Glue hardens in 15 seconds or less to bond quickly. Made of FDA listed materials, it is suitable for food packaging.
    Dia.
    Lg.
    Begins to
    Harden, sec.
    Reaches Full
    Strength, hr.
    Application
    Temp. Range, ° F
    Consistency
    Viscosity,
    cP
    Elongation
    Color
    Food Industry Std.
    For Joining
    Approx. No. of
    Sticks per lb.
    1 lb.
    5 lb.
    25
    lb.
    7/16"4"1524250 to 380Thick Liquid5,000400%BeigeFDA Compliant 21 CFR 175.105Cardboard, Fabric457518A570000000000000000000
    7/16"15"524250 to 300Thin Liquid1,160275%BeigeFDA Compliant 21 CFR 175.105Cardboard, Fabric127518A590000000000000000
    7/16"15"1524250 to 380Thick Liquid5,000400%BeigeFDA Compliant 21 CFR 175.105Cardboard, Fabric127518A580000000000000000
    5/8"10"1524250 to 380Thick Liquid5,000400%BeigeFDA Compliant 21 CFR 175.105Cardboard, Fabric107518A53—00000000000
    back to top