About Structural Adhesives
More
High-Temperature Wicking Instant-Bond Adhesives
These super glues withstand temperatures up to 480° F. They have a thin consistency that allows them to flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Heating Requirements to Reach Full Strength | Cure Type | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Permabond Adhesives | |||||||||||||
| 919 | 1 | Bottle | 0.002" | 10 sec. | 6 hrs. | 4 hrs. air dry then 2 hrs. @ 305° F | Heat, Room Temperature | Thin Liquid (4 cP) | -65° to 480° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 000000 |
Quick-Set Wicking Instant-Bond Adhesives
For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives. Also known as super glue, they have a thin consistency that allows them to flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | Specifications Met | For Joining | Each | |
Permabond Adhesives | ||||||||||||
| 101 | 1 | Bottle | 0.002" | 5 sec. | 24 hrs. | Thin Liquid (3 cP) | -65° to 180° | Clear | Commercial Standard A-A-3097, MIL-A-46050 Type II Class 1 | Composites, Metal, Plastic, Rubber | 0000000 | 000000 |
| 910FS | 1 | Bottle | 0.002" | 5 sec. | 24 hrs. | Thin Liquid (3 cP) | -65° to 190° | Clear | Commercial Standard A-A-3097, MIL-A-46050 Type I Class 1 | Composites, Metal, Plastic, Rubber | 0000000 | 00000 |
Flexible Instant-Bond Adhesives
Accommodate joint movement with these adhesives that remain pliable when cured. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Elongation | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | ||||||||||||
| 4902 | 0.7 | Bottle | 0.004" | 10 sec. | 24 hrs. | Thin Liquid (200 cP) | 155% | -65° to 180° | Clear | Ceramic, Composites, Glass, Metal, Plastic, Rubber, Wood | 000000000 | 000000 |
Instant-Bond Adhesives
Also known as super glue, these adhesives bond quickly. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
240 works especially well on porous materials.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Permabond Adhesives | |||||||||||
| 105 | 1 | Bottle | 0.004" | 10 sec. | 24 hrs. | Thin Liquid (40 cP) | -65° to 180° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 000000 |
| 200 | 1 | Bottle | 0.015" | 15 sec. | 24 hrs. | Thick Liquid (1,500 cP) | -65° to 180° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 00000 |
| 240 | 1 | Bottle | 0.017" | 15 sec. | 24 hrs. | Thick Liquid (1,850 cP) | -65° to 180° | Clear | Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood | 0000000 | 00000 |
| 910 | 1 | Bottle | 0.006" | 10 sec. | 24 hrs. | Thin Liquid (80 cP) | -65° to 190° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 00000 |
| 910 | 16 | Bottle | 0.006" | 10 sec. | 24 hrs. | Thin Liquid (80 cP) | -65° to 190° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 000000 |
Quick-Set Instant-Bond Adhesives
Form bonds in 5 seconds or less with these adhesives, also known as super glue. Use an accelerator (sold separately) to shorten the time it takes to reach full strength.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | Specifications Met | For Joining | Each | |
Permabond Adhesives | ||||||||||||
| 102 | 1 | Bottle | 0.006" | 5 sec. | 24 hrs. | Thin Liquid (80 cP) | -65° to 180° | Clear | MIL-A-46050 Type II Class 2 | Composites, Metal, Plastic, Rubber | 0000000 | 000000 |
| 268 | 1 | Bottle | 0.017" | 5 sec. | 24 hrs. | Thick Liquid (1,800 cP) | -65° to 180° | Clear | MIL-A-46050 Type II Class 3 | Ceramic, Composites, Metal, Plastic, Rubber | 0000000 | 00000 |
High-Temperature Instant-Bond Adhesives
These super glues withstand high temperatures. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Heating Requirements to Reach Full Strength | Cure Type | Consistency (Viscosity) | Temp Range, °F | Color | For Joining | Each | |
Permabond Adhesives | |||||||||||||
| 820 | 1 | Bottle | 0.006" | 10 sec. | 24 hrs. | __ | Room Temperature | Thin Liquid (100 cP) | -65° to 390° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 000000 |
| 920 | 1 | Bottle | 0.006" | 10 sec. | 6 hrs. | 4 hrs. air dry then 2 hrs. @ 305° F | Heat, Room Temperature | Thin Liquid (80 cP) | -65° to 480° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 00000 |
| 922 | 1 | Bottle | 0.017" | 10 sec. | 6 hrs. | 4 hrs. air dry then 2 hrs. @ 305° F | Heat, Room Temperature | Thick Liquid (1,600 cP) | -65° to 480° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 00000 |
Light-Activated Instant-Bond Adhesives
For easy positioning, these adhesives begin to harden only when exposed to light.
Thin liquids flow to fill small gaps between close-fitting parts.
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Light Intensity Requirements to Reach Full Strength | Cure Type | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||||
| 4311 | 1 | Bottle | 0.008" | 5 sec. | 24 hrs. | 10 sec. @ 30 mW/cm2 | UV Light, Visible Light | Thin Liquid (1,050 cP) | -65° to 200° | Green | Ceramic, Composites, Glass, Metal, Plastic, Rubber, Wood | 000000 | 000000 |