We will reply to your message within an hour.
Includes six colors of label tape, each with its own dispenser with serrated edge for cutting.
Cut these labels to a desired length. Use color to identify equipment, materials, and documents at a glance.
These dispensers make it quick and easy to peel off a label when you’re ready to use one. Dispensers have a serrated edge for cutting.
Identify equipment and materials in low-light conditions.
This label tape can withstand temperatures up to 240° F and is autoclavable, so you can use it to identify equipment that needs to be sterilized.
These large decals have a pebbled nonskid surface and an adhesive backing that sticks to most surfaces.
To limit the spread of illness by helping people social distance, these decals have brightly-colored symbols and text that make them easy to see and understand.
Clearly identify areas that require personal protective equipment, such as face masks, gloves, hard hats, safety glasses, and hearing protection.
These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.
Directing people to first-aid stations, the bright color, clear picture, and text on these decals make them easy to notice and understand.
Insulate wire and cable splices, wrap wire harnesses, and repair cable jacketing with this stretchy tape.
No need for adhesive—this tape fuses to itself for a permanent seal and stretches to fit virtually any form. Also known as cold shrink tape.
Apply this liquid for a skin-tight protective coating that insulates and resists moisture, acids, and corrosion.
Made with fiberglass for durability and abrasion resistance, this tape also withstands high temperatures.
This chemical-resistant tape has adhesive on both sides.
At only 0.0025" thick, this tape combines conformability with durability and abrasion resistance.
This puncture- and cut-resistant cotton tape is coated with a high-grade electrical-insulating varnish. Also known as cambric tape.
This polyester tape has a woven mesh edge that conducts electricity. Use it to shield cables and electronic components from EMI (electromagnetic interference).
Use this tape to attach components to heat sinks and metal chassis walls in place of screws and other mechanical fasteners. It conducts heat away from sensitive electronics.
Use this tape to modify printed circuit boards, shield components, and prototype wiring-board layout and design.
A coating on this polyimide tape minimizes ESD (electrostatic discharge) when unwound from the roll and also during removal.
The adhesive on this conformable aluminum foil tape is electrically conductive for use on surfaces that can't be soldered. Use it to shield cables and electronic components from EMI (electromagnetic interference).
Outline and draw attention to safety zones and hazards with this tape.
Made to the highest standards for cleanliness, this tape meets clean room requirements. It releases minimal contaminants, leaves no residue behind, and comes sealed in a plastic bag. Use it to mark hazardous items or areas.
Use this crepe paper tape for sharp paint lines.
For outdoor painting jobs, this plastic tape stands up to the elements. The high-tack adhesive works on rough exterior surfaces, such as stucco and masonry.
The adhesive on this crepe paper tape won't damage painted and finished surfaces.
This crepe paper tape keeps its hold, even on 300° F surfaces.
Brush on this liquid to mask small surfaces and irregular shapes.
Often used for masking vehicles when painting, this extra-wide tape clings to surfaces and seals off the covered area. It comes in a dispenser with a cutting blade.
This tubular foam tape compresses to fill the gaps around door jambs and other openings that flat masking tape can't.
Only one edge of this kraft paper tape has adhesive. Apply the sticky side along edges and molding, and the other edge sticks out to catch drips.
This vinyl tape meets clean room requirements and won't leave residue behind. It comes sealed in a plastic bag.
Cover holes, fastener heads, and small areas with these shapes.
Aluminum foil is laminated to a tough fiberglass cloth to form a high-strength, reflective tape that resists temperatures up to 500° F. Use it for flame-spray masking and wire harness heat shielding.
Made of polyester plastic, this tape resists tearing in high-temperature masking jobs, such as on circuit boards and when powder coating.
Use this solvent-resistant plastic tape for anodizing and electroplating applications.
Cover small spots and holes while paint stripping and electroplating, or use as a moisture and dust barrier. These aluminum foil discs are flexible and conform to irregular shapes.
At half the thickness of our other masking tape for electronics, this polyimide tape conforms easily to components.
Use this tape to wrap and splice cables, mask components while soldering, or as a 3D printing surface.
Use these convenient cut shapes to mask holes, fastener heads, and small areas while soldering.
Temporarily protect highly polished plastic, metal, and glass surfaces from scratching and marring.
Control the unwanted noise that comes from vibrating panels and support structures. This aluminum foil tape reduces vibration by converting it into a small amount of heat.
Quiet squeaky floor joists and reduce vibration with this foam tape.
Dirt, dust, and paint overspray get trapped in this tape's fibers to protect surfaces and minimize cleanup. Its low-tack adhesive makes it easy to apply and remove.
This tape reflects intense heat to protect sensitive components.
Protect parts from radiation, X-rays, moisture, dust, and chemicals during electroplating and similar processes.
Made from stainless steel, this noncorrosive, nonstaining, and nonmagnetic tape bonds to metal. Patch scratched coatings and finishes to prevent corrosion in marine, food-processing, and nuclear applications.
Also known as Ruby Red lithographer's tape, this semi-clear tape filters out light that can affect photo-sensitive film and equipment.
This flexible, multipurpose tape offers water resistance with excellent adhesion.
For quick repairs, these small rolls of tape don't have a spool so they easily fit into a pocket.
Also known as gaffer's tape, this conformable cloth tape leaves no residue when removed. The matte finish won't reflect light. Choose a color that will blend in for temporary repairs.
Meets ASME and NRC requirements for use in nuclear power plants. Use to seal end caps on stainless steel pipes, hold labels and signs, and seal ductwork.
Seal and mask rough surfaces such as concrete and stucco with this tape. The adhesive removes cleanly, even after long-term exposure to moisture and UV light.
It has the look of foil, but this polyethylene-coated cloth tape is more conformable so it won't twist or curl.
Our thinnest duct tape, this tape is easy to unwind and tear by hand.
This tape has a high-tack adhesive that bonds quickly to rough surfaces such as wood, plaster, stucco, brick, metal, and cement.
This tape has a self-extinguishing adhesive for flame retardance.
This general purpose tape is suitable for most packaging applications.
This tape forms a stronger bond than our other packaging tape.
Made of chemical-resistant PVC, this tape securely seals packages in harsh environments.
For use in clean rooms, this tape won't leave residue behind.
The strong backing on this kraft paper tape resists moisture and weathering, yet it can still be torn by hand.
Seal boxes with rough or challenging surfaces, such as corrugated and printed cardboard.
Seal and label packages in one step.
Seal and color-code bagged parts with this tape.
Tri-directional fiberglass strands provide extra strength.
Wet the adhesive on this gummed kraft paper tape to secure corrugated, printed, and overstuffed cartons.
Secure doors and panels during shipping. This tape sticks to plastic, metal, and glass without leaving residue behind.
When exposed to moisture, this resin-coated fiberglass tape becomes rock-hard in about 30 minutes. Use it for rigid, waterproof repairs.
When seams and joints begin to show wear, this super-strong reinforcing tape provides support. It is flexible yet nonelastic and stays in place even in damp conditions.
Often used to repair vinyl facings, this tape can be used on water heater blankets and fiberglass insulation joints.
This uncoated tape is thinner and more conformable than our other repair tape to reinforce irregular shapes.
Create dams in pipes before welding, then wash away with water or steam.
This tape has a high-bond adhesive that won't leave residue behind so it meets clean room requirements.
With excellent resistance to solvents, this tape is often used as blocking tape on silk screen frames.
Use this glossy tape to seal seams and repair vinyl material such as banners.
Temporarily join rolls of paper and film—this tape won't leave residue behind.
Only 0.0019" thick, so spliced film and paper easily pass through machinery without breaking.
Seal foil-jacketed insulation as well as air-conditioning and refrigeration systems with this conformable aluminum tape.
For easy identification, this tape is printed with flexible duct standard UL 181A-P or UL 181B-FX.
Reinforced with fiberglass, this tape is flexible yet resists tearing. Use it for sealing and patching insulation and duct.
Seal fiberglass duct and insulation that's faced with an all-service jacket (ASJ). Tape is reinforced with fiberglass.
A layer of foil inside this tape will set off metal detectors if it falls into your food processing line, alerting you to the contamination.
Cut these sheets to create a customized, permanent bond in the shape you need.
Create strong, permanent bonds that can replace mechanical fasteners.
Use this tape for light duty mounting, as well as to splice paper, foil, film, and fabric.
Use this tape outdoors for sealing and mounting signs and security control panels.
Tape is cut into convenient discs and rectangles.
Particle and residue free, this tape meets clean room requirements. It has adhesive on both sides.
Repair ceiling tiles and pass-through windows in clean rooms with this foam tape with adhesive on both sides.
The acrylic adhesive on this tape sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.
Cut these sheets to the shape you need for a custom fit.
The acrylic adhesive on these sheets sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.
These foam discs and squares have extra-strong adhesive on both sides to create permanent bonds.
Mount lightweight signs and trim with this economical tape.
Foam damps vibration while securing lightweight objects, such as nameplates, dispensers, and smoke alarms. This tape has a tacky adhesive on one side and a permanent adhesive on the other.
Often used to install carpet, padding, and linoleum.
Patch and seal roofs, window frames, gutters, and vents with this conformable tape.
Use this tape for a watertight bond on gutters, roofing membranes, and other building materials.
Often used for weatherstripping and sealing gaps around windows, doors, and hatches; this tough tape keeps out moisture, dirt, heat, and cold.
This tough, abrasion-resistant tape sticks to itself, so you can layer it over joints and seams to create an extra-strong bond. The thick adhesive conforms to fasteners and gaps to keep water out, even in extreme conditions.
Cover chutes, packaging lines, and slides with this tape for a slippery, nonstick surface that resists abrasion and impact.
Protect small parts with these slippery UHMW rings, discs, and squares.
Add a slippery surface to difficult-to-bond surfaces, such as plastic, foam, and powder-coated metal.
Highly resistant to impact, tearing, and corrosive chemicals, use FEP tape to line chutes and hoppers and to cover shelves in laboratories.
Fiberglass is laminated with Teflon® PTFE for a slippery, durable tape with excellent chemical and temperature resistance. Use it as a release surface on heat sealers and blister forming equipment.
Also known as skived tape, this low-friction tape stretches to conform to irregular surfaces.
Use this slippery PTFE-coated tape for a smooth release on heat sealers and molds.
Often referred to as Rulon and bearing tape, this self-lubricating PTFE tape provides better abrasion and wear resistance than our standard slippery PTFE tape.
PEEK offers the best wear and abrasion resistance of our low-friction tapes. Use it for wire wraps and sliding bearing surfaces.
Just like a gecko clings to a wall, this tape has microscopic fingers to grip smooth surfaces. It removes cleanly and can be reused.
Also known as roller tape, this tape is coated with silicone to grip smooth surfaces and resist sticky substances, such as ink. It adheres to itself without adhesive.
Tear a strip of tape off the perforated roll for easy, uniform installation.
Thicker than other floor marking tape, this tape withstands abrasion in high-traffic areas.
These strips come in measured lengths for easy, peel-and-stick installation.
You can easily pull this tape up when it's no longer needed.
Make parking spaces and traffic lanes. This tape conforms to rough surfaces such as concrete and asphalt.
Made of a pliable PVC with a rubber adhesive, this tape stretches and conforms to uneven surfaces for a secure hold.
Designate aisles and work zones in your clean room. Individually bagged, this tape is made to the highest standards for cleanliness, releasing minimal contaminants and leaving no residue behind.
Call attention to hazards in low-light conditions.
Identify safety zones and hazards in the dark for up to six hours.
These peel-and-stick shapes make it easy to outline equipment and other areas within your facility.
Use these arrows to direct traffic indoors and out.
Thicker than other floor marking arrows, use these abrasion-resistant arrows in high-traffic areas.
Direct traffic and identify safety zones in the dark for up to six hours.
Use these footprints to direct traffic in your facility.
Use these dots to direct traffic in your facility.
Direct traffic in low-light conditions.
Thicker than other floor marking dots, use these abrasion-resistant dots in high-traffic areas.
The checkered pattern draws greater attention to safety zones and hazards than solid tape.
Stick safety messages and reminders right where they're needed.
Made of aluminum, this tape can be detected using nonferrous metal detectors.
Bury this tape above piping and cable to warn excavators and prevent damage.
Use this removable adhesive-back tape to make straight rows and columns on planning boards.
Use this tape to repair or connect polyethylene tarps.
Patch rips and seal gloves, boots, and respirators to clothing with this chemical-resistant tape.
Reduce tripping hazards when running cable and cords through a pedestrian area.
Also known as conspicuity tape, this tape draws attention to vehicles.
Stick this flexible tape to the back of welding seams to contain spatter and prevent oxygen, water vapor, and other gases from weakening the weld.