We will reply to your message within an hour.
A ratchet mechanism turns fasteners more quickly than a standard bit driver. Insert a bit into the shaft and a magnet holds it in place.
Drive screws four times faster than ratcheting alone. Grip the speed housing at the base of the shaft with one hand while turning the handle with the other. A magnet at the end of the shaft holds bits in place.
A ratchet mechanism allows you to drive fasteners when there's little space to move the handle.
Operate these tools like a standard bit driver and access hard-reach fasteners with the offset head. Insert a bit and a magnet holds it in place.
Lock the bit into the chuck to prevent accidental disengagement.
Insert a bit into the shaft and a magnet holds it in place.
Bits are held in place with a retaining ring or set screw rather than a magnet, so the tool won't attract loose metal parts and shavings.
LEDs light the tip so you can use these tools in dark areas.
An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet EN 60900 and IEC 60900.
Bits have a different tip at each end and snap into the shaft, which is also a nutdriver.
When working in tight spaces, these short drivers fit where others can't. Bits have a different tip at each end and snap into the shaft, which is also a nutdriver.
An insulated handle and shafts protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900.
Remove and replace the reversible shaft to change the tip of the tool. Sets include a handle and multiple shafts.
Press down on the handle’s collar to either adjust the shaft length or remove the shaft and replace it for a different tip. Sets include a handle and multiple reversible shafts.
A scaled-down version of standard changeable-shaft screwdrivers, these tools are shorter, slimmer, and easy to take with you. Remove and replace the shaft to use a different tip size.
An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC, EN, or ASTM standards.
Sets include assorted drivers with an insulated handle and shaft that protect against shock from accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC, EN, or ASTM standards.
Use these ceramic-tipped screwdrivers for adjusting sensitive electronic components such as capacitors and resistors. They're completely nonconductive and nonmagnetic so there's no risk of short-circuiting or creating magnetic interference. Remove and replace the shafts to use a different size or drive style.
A magnetized tip holds the screw in place. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.
Keep a set of keys neatly in your tool box or pocket to turn multiple fastener sizes.
Slide a different shaft into a handle to change tip size or drive style.
Fasten differently sized screws with these sets. They save you the effort of switching three separate bits in and out of a power tool, instead letting you flip between a countersinking drill and a screwdriver bit with a single hand.
Drill, countersink, and drive screws without switching three separate bits in and out of your power tool.