McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    71 Products

    Starrett High-Accuracy Combination Squares

    Replace your try square, miter square, depth gauge, height gauge, center-point finder, and level. The blade on these squares meets Fed. Spec. GGG-R-791H, which establishes uniform standards for accuracy, graduations, and size. Blades are labeled with numeric increments that are less than 1" for quick reading.
    Blades with Square Head
    Image of Product. Front orientation. Contains Annotated. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head .
    Image of Product. Inch. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head , Inch.

    Inch

    Square head checks 90° angles.
    Hardened Steel Square Head—Hardened-steel square heads are more durable and last longer than cast iron square heads.
    Satin Blade—Satin blade appearance is corrosion resistant and reduces glare.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Hardened Steel
    Square Head
    Blade
    Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Lg. Accuracy
    Wd.
    Thk.
    Material
    Appearance
    Color
    Color
    Type
    Head
    Lg.
    Each
    Each
    Inch
    4"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.002" to 0.004"5/8"1/16"SteelSatinChrome, SilverBlackEtched2 1/4"0000000000000000000000000000
     
    Replacement Square Head Lockbolts
    Each
    Replacement Lockbolt for Square and Center Heads0000000000000
    Blades with Square Head and Center Head
    Image of Product. Front orientation. Contains Annotated. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head and Center Head .
    Image of Product. Inch. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head and Center Head , Inch.

    Inch

    Square head checks 90° angles.
    Center head identifies the center on pipes, rods, and shafts.
    Satin Blade—Satin blade appearance is corrosion resistant and reduces glare.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Blade
    Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Lg. Accuracy
    Wd.
    Thk.
    Material
    Appearance
    Color
    Color
    Type
    Head
    Lg.
    Each
    Inch
    4"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.002" to 0.004"5/8"1/16"SteelSatinChrome, SilverBlackEtched2 1/4"00000000000000
     
    Replacement Square Head Lockbolts
    Each
    Replacement Lockbolt for Square and Center Heads0000000000000
    Blades with Square Head with Built-In Level and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head with Built-In Level and Scriber.
    Image of Product. Inch/Metric. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head with Built-In Level and Scriber, Metric, Inch, 4/32" Numeric Graduations - 2, 10 mm Numeric Graduations.

    Inch/Metric

    Image of Product. Inch. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head with Built-In Level and Scriber, Inch, 4/32" Numeric Graduations, 8/64" Numeric Graduations - 2.

    Inch

    Square head checks 90° angles.
    Hardened Steel Square Head—Hardened-steel square heads are more durable and last longer than cast iron square heads.
    Satin Blade—Satin blade appearance is corrosion resistant and reduces glare.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Hardened Steel
    Square Head
    Blade Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Lg. Accuracy
    Wd.
    Thk.
    Material
    Appearance
    Color
    Color
    Type
    Head
    Lg.
    Each
    Head
    Lg.
    Each
    Inch
    6"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.002" to 0.004"3/4"5/64"Steel—SilverBlackEtched2 13/32"00000000000000————0
    6"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.002" to 0.004"3/4"5/64"SteelSatinChrome, SilverBlackEtched2 13/32"00000000000002 13/32"00000000000000
    6"1/32" (4/32"), 1/64" (8/64")1/50" (1/10"), 1/100" (1/10")-0.002" to 0.004"3/4"5/64"SteelSatinChrome, SilverBlackEtched2 13/32"00000000000002 13/32"0000000000000
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.005"1"3/32"Steel—SilverBlackEtched4 1/2"0000000000000————0
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.005"1"3/32"SteelSatinChrome, SilverBlackEtched4 1/2"00000000000003 5/8"0000000000000
    12"1/32" (4/32"), 1/64" (8/64")1/50" (1/10"), 1/100" (1/10")-0.0035" to 0.005"1"3/32"SteelSatinChrome, SilverBlackEtched4 1/2"00000000000003 5/8"0000000000000
    18"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.006"1"3/32"SteelSatinChrome, SilverBlackEtched4 1/2"00000000000003 5/8"0000000000000
    24"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.007"1"3/32"SteelSatinChrome, SilverBlackEtched4 1/2"00000000000003 5/8"0000000000000
    24"1/32" (4/32"), 1/64" (8/64")1/50" (1/10"), 1/100" (1/10")-0.0035" to 0.007"1"3/32"SteelSatinChrome, SilverBlackEtched————03 5/8"0000000000000
     
    Inch/Metric
    11 3/4"/300 mm0.5 mm (10 mm), 1/32" (4/32")1 mm (10 mm), 1/64" (8/64")-0.0035" to 0.005"/
    -0.09 mm to 0.15 mm    		1"3/32"SteelSatinChrome, SilverBlackEtched4 1/2"00000000000003 5/8"0000000000000
    23 1/2"/600 mm0.5 mm (10 mm), 1/32" (4/32")1 mm (10 mm), 1/64" (8/64")-0.0035" to 0.007"/
    -0.11 mm to 0.25 mm    		1"3/32"SteelSatinChrome, SilverBlackEtched————03 5/8"0000000000000
     
    Replacements for Squares
    Each
    Replacement Case for Combination Squares with 12" Long Blade0000000000000
    Replacement Lockbolt for Square and Center Heads000000000000
    Replacement Lockbolt for Square, Center, and Protractor Heads00000000000
    Blades with Square Head with Built-In Level, Center Head, and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, and Scriber.
    Image of Product. Inch. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, and Scriber, Inch.

    Inch

    Square head checks 90° angles.
    Center head identifies the center on pipes, rods, and shafts.
    Hardened Steel Square Head—Hardened-steel square heads are more durable and last longer than cast iron square heads.
    Satin Blade—Satin blade appearance is corrosion resistant and reduces glare.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Hardened Steel
    Square Head
    Blade
    Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Lg. Accuracy
    Wd.
    Thk.
    Material
    Appearance
    Color
    Color
    Type
    Head
    Lg.
    Each
    Head
    Lg.
    Each
    Inch
    6"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.002" to 0.004"3/4"5/64"SteelSatinChrome, SilverBlackEtched————02 13/32"00000000000000
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.005"1"3/32"SteelSatinChrome, SilverBlackEtched4 1/2"000000000000003 5/8"0000000000000
     
    Replacements for Squares
    Each
    Replacement Case for Combination Squares with 12" Long Blade0000000000000
    Replacement Lockbolt for Center Heads000000000000
    Replacement Lockbolt for Square and Center Heads000000000000
    Replacement Lockbolt for Square, Center, and Protractor Heads00000000000
    Blades with Square Head with Built-In Level, Center Head, Protractor Head, and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Protractor Head, and Scriber.
    Image of Product. Inch. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Protractor Head, and Scriber, Inch.

    Inch

    Square head checks 90° angles.
    Protractor head measures angles.
    Center head identifies the center on pipes, rods, and shafts.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Blade
    Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Lg. Accuracy
    Wd.
    Thk.
    Material
    Color
    Color
    Type
    Head
    Lg.
    Each
    Inch
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.005"1"3/32"SteelSilverBlackEtched4 1/2"00000000000000
    18"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.006"1"3/32"SteelSilverBlackEtched4 1/2"0000000000000
    24"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.007"1"3/32"SteelSilverBlackEtched4 1/2"0000000000000
     
    Replacements for Squares
    Each
    Replacement Case for Combination Squares with 12" Long Blade0000000000000
    Replacement Lockbolt for Square, Center, and Protractor Heads00000000000
    Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head, and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head, and Scriber.
    Image of Product. Inch/Metric. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head, and Scriber, Metric, Inch, 4/32" Numeric Graduations - 2, 10 mm Numeric Graduations.

    Inch/Metric

    Image of Product. Inch. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head, and Scriber, Inch, 4/32" Numeric Graduations, 8/64" Numeric Graduations - 2.

    Inch

    Square head checks 90° angles.
    Protractor head measures angles.
    Center head identifies the center on pipes, rods, and shafts.
    Hardened Steel Square Head—Hardened-steel square heads are more durable and last longer than cast iron square heads.
    Satin Blade—Satin blade appearance is corrosion resistant and reduces glare.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Hardened Steel
    Square Head
    Blade Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Lg. Accuracy
    Wd.
    Thk.
    Material
    Appearance
    Color
    Color
    Type
    Head
    Lg.
    Each
    Head
    Lg.
    Each
    Inch
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.005"1"3/32"Steel—SilverBlackEtched4 1/2"00000000000000————0
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.005"1"3/32"SteelSatinChrome, SilverBlackEtched————03 5/8"00000000000000
    12"1/32" (4/32"), 1/64" (8/64")1/50" (1/10"), 1/100" (1/10")-0.0035" to 0.005"1"3/32"Steel—SilverBlackEtched4 1/2"0000000000000————0
    12"1/32" (4/32"), 1/64" (8/64")1/50" (1/10"), 1/100" (1/10")-0.0035" to 0.005"1"3/32"SteelSatinChrome, SilverBlackEtched————03 5/8"0000000000000
    18"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.006"1"3/32"Steel—SilverBlackEtched4 1/2"0000000000000————0
    18"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.006"1"3/32"SteelSatinChrome, SilverBlackEtched————03 5/8"0000000000000
    18"1/32" (4/32"), 1/64" (8/64")1/50" (1/10"), 1/100" (1/10")-0.0035" to 0.006"1"3/32"SteelSatinChrome, SilverBlackEtched————03 5/8"0000000000000
    24"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.007"1"3/32"Steel—SilverBlackEtched4 1/2"0000000000000————0
    24"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.007"1"3/32"SteelSatinChrome, SilverBlackEtched————03 5/8"0000000000000
    24"1/32" (4/32"), 1/64" (8/64")1/50" (1/10"), 1/100" (1/10")-0.0035" to 0.007"1"3/32"SteelSatinChrome, SilverBlackEtched————03 5/8"0000000000000
     
    Inch/Metric
    11 3/4"/300 mm0.5 mm (10 mm), 1/32" (4/32")1 mm (10 mm), 1/64" (8/64")-0.0035" to 0.005"/
    -0.09 mm to 0.15 mm    		1"3/32"Steel—SilverBlackEtched4 1/2"0000000000000————0
    11 3/4"/300 mm0.5 mm (10 mm), 1/32" (4/32")1 mm (10 mm), 1/64" (8/64")-0.0035" to 0.005"/
    -0.09 mm to 0.15 mm    		1"3/32"SteelSatinChrome, SilverBlackEtched————03 5/8"0000000000000
    23 1/2"/600 mm0.5 mm (10 mm), 1/32" (4/32")1 mm (10 mm), 1/64" (8/64")-0.0035" to 0.007"/
    -0.11 mm to 0.25 mm    		1"3/32"Steel—SilverBlackEtched4 1/2"0000000000000————0
     
    Replacements for Squares
    Each
    Replacement Case for Combination Squares with 12" Long Blade0000000000000
    Replacement Lockbolt for Square, Center, and Protractor Heads00000000000

    Combination Squares

    Replace your try square, miter square, depth gauge, marking gauge, 90° level, ruler, and scriber with one tool. Blades labeled with numeric increments that are less than 1" are quick-reading.
    Blades with Square Head with Built-In Level
    Image of Product. Front orientation. Contains Annotated. Squares. Combination Squares, Blades with Square Head with Built-In Level.
    Image of Product. Inch/Metric. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Combination Squares, Blades with Square Head with Built-In Level, Metric, Inch.

    Inch/Metric

    Square head checks 90° angles.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Plastic Square Head
    Blade Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Wd.
    Thk.
    Material
    Color
    Color
    Type
    Head
    Lg.
    Each
    Inch/Metric
    12"/304 mm1/32" (8/32"), 1 mm (10 mm)1 mm (10 mm), 1/16" (1")1"3/32"Stainless SteelSilverBlackEtched4 9/16"00000000000
     
    Blades with Square Head with Built-In Level and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. Combination Squares, Blades with Square Head with Built-In Level and Scriber.
    Image of Product. Inch/Metric. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Combination Squares, Blades with Square Head with Built-In Level and Scriber, Metric, Inch, 8/32" Numeric Graduations, 10 mm Numeric Graduations - 2.

    Inch/Metric

    Image of Product. Inch. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Combination Squares, Blades with Square Head with Built-In Level and Scriber, Inch, 1" Numeric Graduations - 2, 1" Numeric Graduations.
    Image of Product. Metric. Front orientation. ZoomedIn view. Contains Annotated. Squares. Combination Squares, Blades with Square Head with Built-In Level and Scriber, Metric, 10 mm Numeric Graduations - 2, 10 mm Numeric Graduations.

    Inch

    Metric

    Square head checks 90° angles.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Zinc Square Head
    Blade Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Wd.
    Thk.
    Material
    Color
    Color
    Type
    Head
    Lg.
    Each
    Inch
    6"1/16" (1"), 1/32" (1")1/8" (1"), 1/16" (1")13/16"5/64"Stainless SteelSilverBlackEtched3 11/16"000000000000
    12"1/16" (1"), 1/32" (1")1/8" (1"), 1/16" (1")1"3/32"Stainless SteelSilverBlackEtched4 5/8"00000000000
    16"1/16" (1"), 1/32" (1")1/8" (1"), 1/16" (1")1"3/32"Stainless SteelSilverBlackEtched4 5/8"00000000000
     
    Inch/Metric
    12"/300 mm1/32" (8/32"), 1 mm (10 mm)1 mm (10 mm), 1/16" (1")1"3/32"Stainless SteelSilverBlackEtched4 5/8"0000000000000
    16"/400 mm1/32" (8/32"), 1 mm (10 mm)1 mm (10 mm), 1/16" (1")1"3/32"Stainless SteelSilverBlackEtched4 3/4"0000000000000
    6"/150 mm1/32" (8/32"), 1 mm (10 mm)1 mm (10 mm), 1/16" (1")13/16"5/64"Stainless SteelSilverBlackEtched3 11/16"0000000000000
     
    Metric
    150 mm1 mm (10 mm), 1 mm (10 mm)1 mm (10 mm), 1 mm (10 mm)13/16"5/64"Stainless SteelSilverBlackEtched3 11/16"000000000000
    300 mm1 mm (10 mm), 1 mm (10 mm)1 mm (10 mm), 1 mm (10 mm)1"3/32"Stainless SteelSilverBlackEtched4 5/8"000000000000
    400 mm1 mm (10 mm), 1 mm (10 mm)1 mm (10 mm), 1 mm (10 mm)1"3/32"Stainless SteelSilverBlackEtched4 5/8"000000000000
     
    Blades with Square Head, Angle Finder, and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. Combination Squares, Blades with Square Head, Angle Finder, and Scriber.
    Image of Product. Inch/Metric. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Combination Squares, Blades with Square Head, Angle Finder, and Scriber, Metric, Inch.

    Inch/Metric

    Square head checks 90° angles.
    Angle finder measures any angle from 0° to 90° and has a chart to convert angle to pitch.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Zinc Square Head
    Blade Lg.
    Angle Finder Angle
    Measured Range
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Wd.
    Thk.
    Material
    Color
    Color
    Type
    Head
    Lg.
    Each
    Inch/Metric
    12"/300 mm0° to 90°1 mm (10 mm), 1/32" (4/32")1 mm (10 mm), 1/16" (1")1"5/64"SteelSilverBlackEtched4"0000000000000
     
    Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head with Built-In Level, and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. Combination Squares, Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head with Built-In Level, and Scriber.
    Image of Product. Inch/Metric. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Combination Squares, Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head with Built-In Level, and Scriber, Metric, Inch.

    Inch/Metric

    Square head checks 90° angles.
    Protractor head measures angles.
    Center head identifies the center on pipes, rods, and shafts.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Aluminum Square Head
    Blade Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Wd.
    Thk.
    Material
    Color
    Color
    Type
    Head
    Lg.
    Each
    Inch/Metric
    12"/300 mm1 mm (10 mm), 1/32" (4/32")1 mm (10 mm), 1/16" (1")1"3/32"SteelSilverBlackEtched4 1/4"000000000000
     

    High-Accuracy Combination Squares

    Use these squares in place of your try square, miter square, depth gauge, height gauge, center-point finder, and level. Blades are labeled with numeric increments that are less than 1" for quick reading.
    Blades with Square Head with Built-In Level and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. High-Accuracy Combination Squares, Blades with Square Head with Built-In Level and Scriber.
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Squares. High-Accuracy Combination Squares, Blades with Square Head with Built-In Level and Scriber, Inch.

    Inch

    Square head checks 90° angles.
    Hardened Cast Iron Square Head—Hardened cast iron square heads are more durable and last longer than cast iron square heads.
    Satin Blade—Satin blade appearance is corrosion resistant and reduces glare.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Hardened Cast
    Iron Square Head
    Blade
    Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Lg. Accuracy
    Wd.
    Thk.
    Material
    Appearance
    Color
    Color
    Type
    Head
    Lg.
    Each
    Each
    Inch
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0025" to 0.0025"1"3/32"SteelSatinChrome, SilverBlackEtched4 1/2"000000000000000000000000000000
     
    Replacement Square Head Lockbolts
    Each
    Replacement Lockbolt0000000000000
    Blades with Square Head with Built-In Level, Center Head, and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, and Scriber.
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Squares. High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, and Scriber, Inch.

    Inch

    Square head checks 90° angles.
    Center head identifies the center on pipes, rods, and shafts.
    Hardened Cast Iron Square Head—Hardened cast iron square heads are more durable and last longer than cast iron square heads.
    Satin Blade—Satin blade appearance is corrosion resistant and reduces glare.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Hardened Cast
    Iron Square Head
    Blade
    Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Lg. Accuracy
    Wd.
    Thk.
    Material
    Appearance
    Color
    Color
    Type
    Head
    Lg.
    Each
    Each
    Inch
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0025" to 0.0025"1"3/32"SteelSatinChrome, SilverBlackEtched4 1/2"000000000000000000000000000000
     
    Replacement Square Head Lockbolts
    Each
    Replacement Lockbolt0000000000000
    Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head, and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head, and Scriber.
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Squares. High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head, and Scriber, Inch.

    Inch

    Square head checks 90° angles.
    Protractor head measures angles.
    Center head identifies the center on pipes, rods, and shafts.
    Hardened Cast Iron Square Head—Hardened cast iron square heads are more durable and last longer than cast iron square heads.
    Satin Blade—Satin blade appearance is corrosion resistant and reduces glare.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Hardened Cast
    Iron Square Head
    Blade
    Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Lg. Accuracy
    Wd.
    Thk.
    Material
    Appearance
    Color
    Color
    Type
    Head
    Lg.
    Each
    Each
    Inch
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0025" to 0.0025"1"3/32"SteelSatinChrome, SilverBlackEtched4 1/2"000000000000000000000000000000
     
    Replacement Square Head Lockbolts
    Each
    Replacement Lockbolt0000000000000

    Scratch-Resistant High-Accuracy Combination Squares

    A titanium coating protects the blade against scratches and wear. Use these squares to replace your try square, miter square, depth gauge, height gauge, center-point finder, and level. Blades are labeled with numeric increments that are less than 1" for quick reading.
    Blades with Square Head with Built-In Level and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. Scratch-Resistant High-Accuracy Combination Squares, Blades with Square Head with Built-In Level and Scriber.
    Image of Product. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Scratch-Resistant High-Accuracy Combination Squares, Blades with Square Head with Built-In Level and Scriber, Inch.

    Inch

    Square head checks 90° angles.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Blade
    Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Lg. Accuracy
    Wd.
    Thk.
    Material
    Color
    Color
    Type
    Head
    Lg.
    Each
    Inch
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.002" to 0.002"1"3/32"Titanium-Coated SteelGoldBlackEtched4 1/2"000000000000000
     
    Blades with Square Head with Built-In Level, Center Head, Protractor Head, and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. Scratch-Resistant High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Protractor Head, and Scriber.
    Image of Product. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Scratch-Resistant High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Protractor Head, and Scriber, Inch.

    Inch

    Square head checks 90° angles.
    Protractor head measures angles.
    Center head identifies the center on pipes, rods, and shafts.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Blade
    Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Lg. Accuracy
    Wd.
    Thk.
    Material
    Color
    Color
    Type
    Head
    Lg.
    Each
    Inch
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.002" to 0.002"1"3/32"Titanium-Coated SteelGoldBlackEtched4 1/2"000000000000000
     

    Heavy Duty Combination Squares

    Built for welding and other heavy duty fabricating jobs, these squares have an extra-wide head and a large thumbwheel, so they’re easy to adjust and hold while wearing gloves. They combine the functionality of a try square, miter square, depth gauge, marking gauge, 90° level, and ruler in one tool. Add a clamp to the extra-wide head or use the included leveling tabs to hold material while welding. The tabs can also be used to set workpieces level to one another before fabricating. The fully recessed blade makes it easy to measure around obstacles.
    Blades with Square Head with Built-In Level and Leveling Tabs
    Image of Product. Front orientation. Contains Annotated. Squares. Heavy Duty Combination Squares, Blades with Square Head with Built-In Level and Leveling Tabs.
    Image of Product. Front orientation. Contains Annotated. Squares. Heavy Duty Combination Squares, Blades with Square Head with Built-In Level and Leveling Tabs, Inch.

    Inch

    Square head checks 90° angles.
    Cast Iron Square Head—Squares with a cast iron head are durable and resist both scratches and dents. However, they’re more prone to corrosion than squares with zinc heads.
    Aluminum Square Head—Squares with an aluminum head are lightweight and resist corrosion.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Aluminum
    Square Head
    Blade
    Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Wd.
    Thk.
    Material
    Color
    Color
    Type
    Flange
    Thk.
    Head
    Lg.
    Each
    Each
    Inch
    12"1/8" (1"), 1/16" (1")1/8" (1"), 1/16" (1")1"7/64"Stainless SteelGoldBlackEtched2"5"0000000000000000000000000000
     

    Mitutoyo Squareness Gauges

    Image of Product. Front orientation. Squareness Gauges. Mitutoyo Squareness Gauges.
    Ensure parts are perfectly straight and square—these gauges detect surface deviations so small the human eye can’t see them. As you slide the lever on these gauges up and down, a dial test indicator moves along the vertical surface of your workpiece, measuring how straight and square it is. Checking for slight angles on machined parts or frames verifies they will align properly and function correctly. You can adjust the squareness of the gauges to fine-tune for differences in temperature and humidity and to maintain precision over years of use. Measure an object for height with the scale along the side of the gauge. The housing is cast iron, so the gauges are stable and stand up to frequent use.
    Material
    Base
    Distance Measured
    Range, mm
    Accuracy
    Measuring Increments,
    mm
    Squareness
    Tolerance, mm
    Straightness
    Tolerance, mm
    Housing
    Column
    Lg.
    Wd.
    Includes
    Mfr. Model
    No.
    Each
    0 to 150±0.003 mm0.0020.0030.002Cast IronAluminum
    		7"4"Dial Indicator, Micrometer311-2150000000000000000
    0 to 250±0.003 mm0.0020.0090.0035Cast IronAluminum
    		7"4"Dial Indicator, Micrometer311-225000000000000000
    0 to 450±0.003 mm0.0020.0060.0025Cast IronAluminum
    		7"4"Dial Indicator, Micrometer311-245000000000000000
    back to top