Filter by
Drive Size
Wrench Style
Sold As
Finish
Ratcheting
Drive Style
Overall Length
Material
Head Thickness
Grade
Length
Specifications Met
DFARS Specialty Metals
Export Control Classification Number (ECCN)
For Use With
Container Type
Combination Wrenches
 |
 |
 |
 |  |
12-Point Opening | 6-Point Opening |
Your go-to wrenches for routine maintenance. With two different ends, you need fewer tools to tighten and loosen nuts and bolts. The open end slides onto the side of fasteners for adjustments in tight spots. When nuts and bolts won't budge, the box end fully encircles them to apply maximum torque. Drop forged for added strength, these wrenches will be part of your toolbox for life.
6-Point Opening—Avoid rounding off the corners of hex fasteners. These wrenches won't slip, even when nuts and bolts are rusted or damaged, since they grip the sides rather than the corners.
12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
Black-Oxide Steel—The dark, matte coating protects these wrenches from wear and won't flake off. They offer minimal corrosion resistance, though, so they're best for dry environments.
Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
Box End | Open End | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size, mm | Overall Lg. | Head Offset Angle | Head Thick. | Opening Angle | Head Thick. | Appearance | Specs. Met | Each | |||
6-Point Opening | |||||||||||
Chrome-Plated Steel | |||||||||||
| 7 | 5 1/4" | 15° | 15/64" | 15° | 1/4" | Polished | ASME B107.100 | 5314A2 | 000000 | ||
| 8 | 5 1/2" | 15° | 17/64" | 15° | 9/32" | Polished | ASME B107.100 | 5314A3 | 00000 | ||
| 9 | 5 3/4" | 15° | 17/64" | 15° | 9/32" | Polished | ASME B107.100 | 5314A4 | 00000 | ||
| 10 | 6 1/4" | 15° | 5/16" | 15° | 7/32" | Dull | ASME B107.100 | 7191A65 | 00000 | ||
| 10 | 6 3/4" | 15° | 5/16" | 15° | 13/64" | Polished | ASME B107.100 | 5314A5 | 00000 | ||
| 11 | 7" | 15° | 21/64" | 15° | 11/32" | Dull | ASME B107.100 | 7191A66 | 00000 | ||
| 11 | 7" | 15° | 21/64" | 15° | 11/32" | Polished | ASME B107.100 | 5314A6 | 00000 | ||
| 12 | 7 3/4" | 15° | 11/32" | 15° | 1/4" | Dull | ASME B107.100 | 7191A67 | 00000 | ||
| 12 | 7 3/4" | 15° | 11/32" | 15° | 1/4" | Polished | ASME B107.100 | 5314A7 | 00000 | ||
| 13 | 8" | 15° | 11/32" | 15° | 1/4" | Dull | ASME B107.100 | 7191A68 | 00000 | ||
| 13 | 8" | 15° | 11/32" | 15° | 1/4" | Polished | ASME B107.100 | 5314A8 | 00000 | ||
| 14 | 8 5/8" | 15° | 23/64" | 15° | 3/8" | Dull | ASME B107.100 | 7191A69 | 00000 | ||
| 14 | 8 5/8" | 15° | 23/64" | 15° | 3/8" | Polished | ASME B107.100 | 5314A9 | 00000 | ||
| 15 | 9 1/8" | 15° | 23/64" | 15° | 3/8" | Dull | ASME B107.100 | 7191A71 | 00000 | ||
| 15 | 9 1/4" | 15° | 23/64" | 15° | 3/8" | Polished | ASME B107.100 | 5314A11 | 00000 | ||
| 16 | 9 3/8" | 15° | 13/32" | 15° | 5/16" | Dull | ASME B107.100 | 7191A72 | 00000 | ||
| 16 | 9 3/8" | 15° | 13/32" | 15° | 5/16" | Polished | ASME B107.100 | 5314A12 | 00000 | ||
| 17 | 10 1/8" | 15° | 7/16" | 15° | 21/64" | Dull | ASME B107.100 | 7191A73 | 00000 | ||
| 17 | 10 1/8" | 15° | 7/16" | 15° | 21/64" | Polished | ASME B107.100 | 5314A13 | 00000 | ||
| 18 | 10 1/2" | 15° | 29/64" | 15° | 15/32" | Dull | ASME B107.100 | 7191A74 | 00000 | ||
| 18 | 10 1/2" | 15° | 29/64" | 15° | 15/32" | Polished | ASME B107.100 | 5314A14 | 00000 | ||
| 19 | 11 1/8" | 15° | 15/32" | 15° | 11/32" | Dull | ASME B107.100 | 7191A75 | 00000 | ||
| 19 | 11 1/8" | 15° | 15/32" | 15° | 11/32" | Polished | ASME B107.100 | 5314A15 | 00000 | ||
12-Point Opening | |||||||||||
Chrome-Plated Steel | |||||||||||
| 6 | 4 15/16" | 15° | 11/64" | 15° | 17/64" | Dull | ASME B107.100 | 7191A46 | 00000 | ||
| 6 | 5" | 15° | 3/16" | 15° | 11/64" | Polished | ASME B107.100 | 5314A29 | 00000 | ||
| 7 | 5 3/16" | 15° | 3/16" | 15° | 1/4" | Dull | ASME B107.100 | 7191A51 | 00000 | ||
| 7 | 5 1/4" | 15° | 13/64" | 15° | 3/16" | Polished | ASME B107.100 | 5314A31 | 00000 | ||
| 8 | 5 1/2" | 15° | 15/64" | 15° | 3/16" | Dull | ASME B107.100 | 7191A11 | 00000 | ||
| 8 | 5 1/2" | 15° | 15/64" | 15° | 3/16" | Polished | ASME B107.100 | 5314A32 | 00000 | ||
| 9 | 5 13/16" | 15° | 1/4" | 15° | 13/64" | Dull | ASME B107.100 | 7191A12 | 00000 | ||
| 9 | 5 7/8" | 15° | 1/4" | 15° | 13/64" | Polished | ASME B107.100 | 5314A33 | 00000 | ||
| 10 | 6 1/8" | 15° | 9/32" | 15° | 7/32" | Dull | ASME B107.100 | 7191A13 | 00000 | ||
| 10 | 6 1/8" | 15° | 9/32" | 15° | 7/32" | Polished | ASME B107.100 | 5314A51 | 00000 | ||
| 11 | 6 1/2" | 15° | 19/64" | 15° | 15/64" | Dull | ASME B107.100 | 7191A14 | 00000 | ||
| 11 | 6 1/2" | 15° | 19/64" | 15° | 1/4" | Polished | ASME B107.100 | 5314A52 | 00000 | ||
| 12 | 6 7/8" | 15° | 19/64" | 15° | 1/4" | Polished | ASME B107.100 | 5314A53 | 00000 | ||
| 12 | 6 7/8" | 15° | 5/16" | 15° | 1/4" | Dull | ASME B107.100 | 7191A15 | 00000 | ||
| 13 | 7 1/8" | 15° | 21/64" | 15° | 17/64" | Polished | ASME B107.100 | 5314A54 | 00000 | ||
| 13 | 7 3/16" | 15° | 11/32" | 15° | 17/64" | Dull | ASME B107.100 | 7191A16 | 00000 | ||
| 14 | 7 15/16" | 15° | 23/64" | 15° | 9/32" | Dull | ASME B107.100 | 7191A17 | 00000 | ||
| 14 | 8" | 15° | 23/64" | 15° | 9/32" | Polished | ASME B107.100 | 5314A55 | 00000 | ||
| 15 | 8 1/4" | 15° | 3/8" | 15° | 19/64" | Polished | ASME B107.100 | 5314A56 | 00000 | ||
| 15 | 8 1/4" | 15° | 3/8" | 15° | 5/16" | Dull | ASME B107.100 | 7191A18 | 00000 | ||
| 16 | 8 9/16" | 15° | 13/32" | 15° | 21/64" | Dull | ASME B107.100 | 7191A19 | 00000 | ||
| 16 | 8 5/8" | 15° | 13/32" | 15° | 5/16" | Polished | ASME B107.100 | 5314A57 | 00000 | ||
| 17 | 9 1/8" | 15° | 7/16" | 15° | 11/32" | Dull | ASME B107.100 | 7191A21 | 00000 | ||
| 17 | 9 1/8" | 15° | 7/16" | 15° | 11/32" | Polished | ASME B107.100 | 5314A58 | 00000 | ||
| 18 | 9 9/16" | 15° | 29/64" | 15° | 11/32" | Dull | ASME B107.100 | 7191A22 | 00000 | ||
| 18 | 9 5/8" | 15° | 29/64" | 15° | 11/32" | Polished | ASME B107.100 | 5314A59 | 00000 | ||
| 19 | 10 1/16" | 15° | 29/64" | 15° | 23/64" | Dull | ASME B107.100 | 7191A23 | 00000 | ||
| 19 | 10 1/8" | 15° | 29/64" | 15° | 23/64" | Polished | ASME B107.100 | 5314A61 | 00000 | ||
| 20 | 10 13/16" | 15° | 1/2" | 15° | 27/64" | Dull | ASME B107.100 | 7191A24 | 00000 | ||
| 20 | 10 7/8" | 15° | 1/2" | 15° | 27/64" | Polished | ASME B107.100 | 5314A64 | 00000 | ||
| 21 | 11 5/16" | 15° | 1/2" | 15° | 7/16" | Dull | ASME B107.100 | 7191A25 | 00000 | ||
| 21 | 11 3/8" | 15° | 1/2" | 15° | 7/16" | Polished | ASME B107.100 | 5314A65 | 00000 | ||
| 22 | 11 3/4" | 15° | 33/64" | 15° | 7/16" | Polished | ASME B107.100 | 5314A66 | 00000 | ||
| 22 | 11 3/4" | 15° | 17/32" | 15° | 27/64" | Dull | ASME B107.100 | 7191A26 | 00000 | ||
| 23 | 12 1/4" | 15° | 17/32" | 15° | 29/64" | Dull | ASME B107.100 | 7191A27 | 00000 | ||
| 24 | 12 9/16" | 15° | 17/32" | 15° | 15/32" | Polished | ASME B107.100 | 5314A68 | 00000 | ||
| 24 | 12 3/4" | 15° | 17/32" | 15° | 15/32" | Dull | ASME B107.100 | 7191A28 | 00000 | ||
| 25 | 13 1/2" | 15° | 5/8" | 15° | 15/32" | Dull | ASME B107.100 | 7191A29 | 00000 | ||
| 25 | 14 1/16" | 15° | 19/32" | 15° | 27/64" | Polished | ASME B107.100 | 5314A69 | 00000 | ||
| 26 | 14" | 15° | 5/8" | 15° | 33/64" | Dull | ASME B107.100 | 7191A33 | 00000 | ||
| 26 | 14 3/4" | 15° | 19/32" | 15° | 27/64" | Polished | ASME B107.100 | 5314A71 | 00000 | ||
| 27 | 14 1/2" | 15° | 21/32" | 15° | 15/32" | Dull | ASME B107.100 | 7191A31 | 00000 | ||
| 27 | 14 7/8" | 15° | 39/64" | 15° | 5/8" | Polished | ASME B107.100 | 5314A72 | 00000 | ||
| 28 | 14 7/8" | 15° | 41/64" | 15° | 21/32" | Polished | ASME B107.100 | 5314A96 | 00000 | ||
| 28 | 15 1/4" | 15° | 11/16" | 15° | 35/64" | Dull | ASME B107.100 | 7191A34 | 00000 | ||
| 29 | 15 1/4" | 15° | 11/16" | 15° | 35/64" | Dull | ASME B107.100 | 7191A35 | 00000 | ||
| 30 | 16" | 15° | 23/32" | 15° | 9/16" | Dull | ASME B107.100 | 7191A36 | 00000 | ||
| 32 | 16 3/4" | 15° | 3/4" | 15° | 19/32" | Dull | ASME B107.100 | 7191A32 | 00000 | ||
| 36 | 21" | 15° | 15/16" | 15° | 3/4" | Dull | ASME B107.100 | 7191A37 | 000000 | ||
| 41 | 23" | 15° | 15/16" | 15° | 3/4" | Dull | ASME B107.100 | 7191A93 | 000000 | ||
| 46 | 25 1/2" | 15° | 1" | 15° | 13/16" | Dull | ASME B107.100 | 7191A39 | 000000 | ||
| 50 | 28 1/2" | 15° | 1 1/16" | 15° | 7/8" | Dull | ASME B107.100 | 7191A41 | 000000 | ||
| 55 | 29" | 15° | 1 37/64" | 15° | 63/64" | Dull | ASME B107.100 | 7191A82 | 000000 | ||
| 60 | 29" | 15° | 1 37/64" | 15° | 63/64" | Dull | ASME B107.100 | 7191A83 | 000000 | ||
| 65 | 30" | 15° | 1 11/16" | 15° | 1 5/32" | Dull | ASME B107.100 | 7191A84 | 000000 | ||
| 70 | 30" | 15° | 1 11/16" | 15° | 1 5/32" | Dull | ASME B107.100 | 7191A85 | 000000 | ||
Black-Oxide Steel | |||||||||||
| 6 | 4 15/16" | 15° | 3/16" | 15° | 11/64" | Dull | ASME B107.100 | 71405A76 | 00000 | ||
| 7 | 5 3/16" | 15° | 13/64" | 15° | 3/16" | Dull | ASME B107.100 | 71405A32 | 00000 | ||
| 8 | 5 1/2" | 15° | 15/64" | 15° | 3/16" | Dull | ASME B107.100 | 71405A33 | 00000 | ||
| 9 | 5 13/16" | 15° | 1/4" | 15° | 13/64" | Dull | ASME B107.100 | 71405A34 | 00000 | ||
| 10 | 6 1/8" | 15° | 9/32" | 15° | 7/32" | Dull | ASME B107.100 | 71405A35 | 00000 | ||
| 11 | 6 1/2" | 15° | 5/16" | 15° | 1/4" | Dull | ASME B107.100 | 71405A77 | 00000 | ||
| 12 | 6 7/8" | 15° | 5/16" | 15° | 1/4" | Dull | ASME B107.100 | 71405A37 | 00000 | ||
| 13 | 7 3/16" | 15° | 11/32" | 15° | 17/64" | Dull | ASME B107.100 | 71405A38 | 00000 | ||
| 14 | 7 15/16" | 15° | 23/64" | 15° | 9/32" | Dull | ASME B107.100 | 71405A39 | 00000 | ||
| 15 | 8 1/4" | 15° | 3/8" | 15° | 5/16" | Dull | ASME B107.100 | 71405A41 | 00000 | ||
| 16 | 8 9/16" | 15° | 13/32" | 15° | 21/64" | Dull | ASME B107.100 | 71405A42 | 00000 | ||
| 17 | 9 1/8" | 15° | 7/16" | 15° | 11/32" | Dull | ASME B107.100 | 71405A43 | 00000 | ||
| 18 | 9 9/16" | 15° | 29/64" | 15° | 11/32" | Dull | ASME B107.100 | 71405A44 | 00000 | ||
| 19 | 10 1/16" | 15° | 29/64" | 15° | 23/64" | Dull | ASME B107.100 | 71405A45 | 00000 | ||
| 20 | 10 13/16" | 15° | 1/2" | 15° | 27/64" | Dull | ASME B107.100 | 71405A46 | 00000 | ||
| 21 | 11 5/16" | 15° | 1/2" | 15° | 7/16" | Dull | ASME B107.100 | 71405A47 | 00000 | ||
| 22 | 11 3/4" | 15° | 17/32" | 15° | 27/64" | Dull | ASME B107.100 | 71405A48 | 00000 | ||
| 23 | 12 1/4" | 15° | 17/32" | 15° | 29/64" | Dull | ASME B107.100 | 71405A49 | 00000 | ||
| 24 | 12 3/4" | 15° | 17/32" | 15° | 15/32" | Dull | ASME B107.100 | 71405A51 | 00000 | ||
| 75 | 34" | 15° | 1 7/8" | 15° | 1 3/8" | Dull | ASME B107.100 | 71405A78 | 00000000 | ||
| 80 | 37" | 15° | 1 7/8" | 15° | 1 3/8" | Dull | ASME B107.100 | 71405A79 | 00000000 | ||
Reversible Ratcheting Combination Wrench Sets
 |  |
Plastic Roll-Up Pouch | Plastic Tray |
| |  |
12-Point Opening |
With the flick of a lever, the wrenches in these sets go from loosening nuts and bolts to tightening them. Unlike other ratcheting wrenches, you can turn in either direction without having to flip them over. They're ideal for jobs with frequent pivots between tightening and loosening, such as assembly line maintenance.
12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
Value—Fill out your tool kit for a few dollars per wrench. Typically imported, these cost-friendly sets are the right choice for occasional maintenance.
Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
Box End | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Pieces | Drive Size | Overall Lg. | Head Offset Angle | Number of Teeth | Open-End Opening Angle | Appearance | Material | Container Type | Specs. Met | Each | |||
Value | |||||||||||||
12-Point Opening | |||||||||||||
| 4 | 13/16", 7/8", 15/16", 1" | 10 1/2" to 13" | 15° | 72 | 15° | Polished | Chrome-Plated Steel | Plastic Tray | ASME B107.100 | 6871A412 | 0000000 | ||
| 4 | 21 mm, 22 mm, 24 mm, 25 mm | 5 1/4" to 9 3/4" | 15° | 72 | 15° | Polished | Chrome-Plated Steel | Plastic Roll-Up Pouch | ASME B107.100 | 6871A411 | 000000 | ||
| 8 | 8 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm | 5 1/2" to 9 5/8" | 15° | 72 | 15° | Polished | Chrome-Plated Steel | Plastic Tray | ASME B107.100 | 6871A31 | 000000 | ||
Combination Wrench Sets
 |
Fabric Roll-Up Pouch |
|
|
|
12-Point Opening |
With a range of drive sizes and lengths, these wrench sets are your go-to for routine maintenance. With two different ends, you need fewer tools to tighten and loosen nuts and bolts. The open end slides onto the side of fasteners for adjustments in tight spots. When nuts and bolts won't budge, the box end fully encircles them to apply maximum torque.
12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
Industrial—Made in the U.S. from high-strength steel or stainless steel, these wrenches are built to last. They’re indispensable for daily maintenance and repair.
Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
No. of Pieces | Drive Size, mm | Overall Lg. | Box-End Head Offset Angle | Open-End Opening Angle | Appearance | Material | Container Type | Specs. Met | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Industrial | ||||||||||||
12-Point Opening | ||||||||||||
| 18 | 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 | 5 1/4" to 12 3/4" | 15° | 15° | Polished | Chrome-Plated Steel | Fabric Roll-Up Pouch | ASME B107.100 | 5314A62 | 0000000 | ||
High-Leverage Combination Wrenches
 |
|
|
|
12-Point Opening |
Loosen stubborn and rusted nuts and bolts without breaking a sweat. Up to 3 inches longer than standard wrenches, they give you the same torque with less effort. However, you'll need room to turn these wrenches, so consider a standard- or stubby-length wrench if you're in a tight spot.
12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
Box End | Open End | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size, mm | Overall Lg. | Head Offset Angle | Head Thick. | Opening Angle | Head Thick. | Appearance | Specs. Met | Each | |||
12-Point Opening | |||||||||||
Chrome-Plated Steel | |||||||||||
| 13 | 9" | 15° | 9/32" | 15° | 1/4" | Polished | ASME B107.100 | 5441A1 | 000000 | ||
| 14 | 10" | 15° | 11/32" | 15° | 9/32" | Polished | ASME B107.100 | 5441A101 | 00000 | ||
| 15 | 10 1/2" | 15° | 3/8" | 15° | 9/32" | Polished | ASME B107.100 | 5441A102 | 00000 | ||
| 16 | 11" | 15° | 13/32" | 15° | 9/32" | Polished | ASME B107.100 | 5441A103 | 000000 | ||
| 17 | 12" | 15° | 13/32" | 15° | 5/16" | Polished | ASME B107.100 | 5441A104 | 000000 | ||
| 18 | 12 1/2" | 15° | 13/32" | 15° | 11/32" | Polished | ASME B107.100 | 5441A105 | 000000 | ||
| 19 | 13" | 15° | 7/16" | 15° | 11/32" | Polished | ASME B107.100 | 5441A106 | 000000 | ||
Stubby Combination Wrenches
 |
|
|
|
12-Point Opening |
Turn nuts and bolts in tight spaces. These wrenches are up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. However, you may need longer wrenches for higher-leverage jobs.
12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
Box End | Open End | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size, mm | Overall Lg. | Head Offset Angle | Head Thick. | Opening Angle | Head Thick. | Appearance | Specs. Met | Each | |||
12-Point Opening | |||||||||||
Chrome-Plated Steel | |||||||||||
| 6 | 3 1/4" | 15° | 3/16" | 15° | 11/64" | Polished | ASME B107.100 | 55715A26 | 000000 | ||
| 7 | 3 3/8" | 15° | 7/32" | 15° | 3/16" | Polished | ASME B107.100 | 55715A27 | 00000 | ||
| 8 | 3 1/2" | 15° | 15/64" | 15° | 1/4" | Polished | ASME B107.100 | 55715A28 | 00000 | ||
| 9 | 3 5/8" | 15° | 1/4" | 15° | 13/64" | Polished | ASME B107.100 | 55715A29 | 00000 | ||
| 10 | 3 3/4" | 15° | 9/32" | 15° | 7/32" | Polished | ASME B107.100 | 55715A3 | 00000 | ||
| 11 | 3 15/16" | 15° | 19/64" | 15° | 5/16" | Polished | ASME B107.100 | 55715A31 | 00000 | ||
| 12 | 4 1/8" | 15° | 21/64" | 15° | 11/32" | Polished | ASME B107.100 | 55715A32 | 00000 | ||
| 13 | 4 5/16" | 15° | 23/64" | 15° | 3/8" | Polished | ASME B107.100 | 55715A33 | 00000 | ||
| 14 | 4 1/2" | 15° | 3/8" | 15° | 19/64" | Polished | ASME B107.100 | 55715A34 | 00000 | ||
| 15 | 4 11/16" | 15° | 25/64" | 15° | 13/32" | Polished | ASME B107.100 | 55715A35 | 00000 | ||
| 16 | 4 7/8" | 15° | 27/64" | 15° | 7/16" | Polished | ASME B107.100 | 55715A36 | 00000 | ||
| 17 | 5 1/16" | 15° | 29/64" | 15° | 15/32" | Polished | ASME B107.100 | 55715A37 | 00000 | ||
| 18 | 5 1/4" | 15° | 15/32" | 15° | 11/32" | Polished | ASME B107.100 | 55715A38 | 00000 | ||
| 19 | 5 7/16" | 15° | 31/64" | 15° | 1/2" | Polished | ASME B107.100 | 55715A39 | 00000 | ||
Ratcheting Combination Wrenches
 |
|
 |
12-Point Opening |
Turn nuts and bolts without having to remove and reposition these wrenches. They're commonly used where you don't have enough space for full turns. To switch between loosening and tightening, flip them over.
12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
Box End | Open End | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size, mm | Overall Lg. | Head Thick. | Number of Teeth | Opening Angle | Head Thick. | Appearance | Specs. Met | Each | |||
12-Point Opening | |||||||||||
Chrome-Plated Steel | |||||||||||
| 34 | 18 1/4" | 11/16" | 72 | 15° | 35/64" | Polished | ASME B107.100 | 5163A63 | 000000 | ||
| 36 | 19 3/4" | 13/16" | 72 | 15° | 21/32" | Polished | ASME B107.100 | 5163A64 | 00000 | ||
| 41 | 23" | 55/64" | 72 | 15° | 23/32" | Polished | ASME B107.100 | 5163A65 | 00000 | ||
| 46 | 25 1/2" | 63/64" | 72 | 15° | 27/32" | Polished | ASME B107.100 | 5163A66 | 000000 | ||
| 50 | 26" | 1 3/64" | 72 | 15° | 27/32" | Polished | ASME B107.100 | 5163A67 | 000000 | ||
Stubby Ratcheting Combination Wrench Sets
 |
|
|
12-Point Opening |
Turn nuts and bolts in tight spaces without removing and repositioning the wrenches in these sets. They’re up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. When you need more leverage, opt for standard-length ratcheting wrenches.
12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
Value—Fill out your tool kit for a few dollars per wrench. Typically imported, these cost-friendly sets are the right choice for occasional maintenance.
Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
No. of Pieces | Drive Size, mm | Overall Lg. | No. of Teeth | Open-End Opening Angle | Appearance | Material | Specs. Met | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Value | |||||||||||
12-Point Opening | |||||||||||
| 10 | 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 | 3 3/4" to 5 1/2" | 72 | 15° | Polished | Chrome-Plated Steel | ASME B107.100 | 4363A12 | 0000000 | ||
Stubby Combination Wrench Sets
 |
Plastic Roll-Up Pouch |
|
|
|
12-Point Opening |
Turn nuts and bolts in tight spaces with the wrenches in these sets. They are up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. However, you may need longer wrenches for higher-leverage jobs.
12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
No. of Pieces | Drive Size, mm | Overall Lg. | Box-End Head Offset Angle | Open-End Opening Angle | Appearance | Container Type | Specs. Met | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
12-Point Opening | |||||||||||
Chrome-Plated Steel | |||||||||||
| 14 | 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 | 3 1/4" to 5 1/2" | 15° | 15° | Polished | Plastic Roll-Up Pouch | ASME B107.100 | 55715A41 | 0000000 | ||
