Combination Combination Wrenches

Filter by

Drive Size

Wrench Style

Wrench Opening Shape

Head Style

System of Measurement

Drive Style

Sold As

Ratcheting

Finish

Overall Length

Head Thickness

Appearance

Material

Number of Pieces

Opening Angle

Relative Length

Grade

REACH

For Use With

RoHS

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Container Type

Plastic Roll-Up Pouch

Plastic Tray

Turn Required to Ratchet

Color

Number of Teeth

600 Products

Wrench Opening Shape

6-Point

Avoid rounding off the corners of hex fasteners

72 products

12-Point

The most common opening, use them on hex and 12-point fasteners

488 products

Wrench Opening Shape

Spline

Turn hex, 12-point, and spline fasteners without repositioning your wrench

40 products

Performance

Ratcheting

Turn nuts and bolts without having to remove and reposition your wrench

205 products

Combination Wrenches


12-Point Opening	6-Point Opening

Your go-to wrenches for routine maintenance. With two different ends, you need fewer tools to tighten and loosen nuts and bolts. The open end slides onto the side of fasteners for adjustments in tight spots. When nuts and bolts won't budge, the box end fully encircles them to apply maximum torque. Drop forged for added strength, these wrenches will be part of your toolbox for life.

6-Point Opening—Avoid rounding off the corners of hex fasteners. These wrenches won't slip, even when nuts and bolts are rusted or damaged, since they grip the sides rather than the corners.

12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.

Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.

Black-Oxide Steel—The dark, matte coating protects these wrenches from wear and won't flake off. They offer minimal corrosion resistance, though, so they're best for dry environments.

Corrosion-Resistant Wear-Resistant 420 Stainless Steel—The most corrosion-resistant wrenches we offer. Stronger than other types of stainless steel, they'll withstand years of use without breaking or warping.

Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

			Box End		Open End
	Drive Size	Overall Lg.	Head Offset Angle	Head Thick.	Opening Angle	Head Thick.	Appearance	Specs. Met		Each
6-Point Opening





				Chrome-Plated Steel
				1/4"	4"	15°	15/64"	15°	3/16"	Polished	—	5772A26	000000
				5/16"	4 3/8"	15°	17/64"	15°	3/16"	Polished	—	5772A28	00000
				11/32"	4 5/8"	15°	7/32"	15°	3/16"	Dull	—	56945A54	00000
				3/8"	6 1/4"	15°	5/16"	15°	3/16"	Dull	—	56945A22	00000
				3/8"	6 1/4"	15°	5/16"	15°	3/16"	Polished	—	5772A32	00000
				7/16"	7"	15°	21/64"	15°	11/32"	Dull	—	56945A23	00000
				7/16"	7"	15°	21/64"	15°	11/32"	Polished	—	5772A34	00000
				1/2"	8"	15°	11/32"	15°	1/4"	Dull	—	56945A24	00000
				1/2"	8"	15°	11/32"	15°	1/4"	Polished	—	5772A36	00000
				9/16"	8 5/8"	15°	23/64"	15°	3/8"	Dull	—	56945A25	00000
				9/16"	8 5/8"	15°	23/64"	15°	3/8"	Polished	—	5772A38	00000
				5/8"	9 1/2"	15°	13/32"	15°	19/64"	Dull	—	56945A26	00000
				5/8"	9 1/2"	15°	13/32"	15°	19/64"	Polished	—	5772A41	00000
				11/16"	10 1/4"	15°	7/16"	15°	5/16"	Dull	—	56945A27	00000
				11/16"	10 1/4"	15°	7/16"	15°	5/16"	Polished	—	5772A42	00000
				3/4"	11"	15°	15/32"	15°	11/32"	Dull	—	56945A28	00000
				3/4"	11"	15°	15/32"	15°	11/32"	Polished	—	5772A43	00000
				13/16"	11 7/8"	15°	1/2"	15°	23/64"	Dull	—	56945A29	00000
				13/16"	11 7/8"	15°	1/2"	15°	23/64"	Polished	—	5772A44	00000
				7/8"	12 1/2"	15°	33/64"	15°	17/32"	Dull	—	56945A31	00000
				7/8"	12 1/2"	15°	33/64"	15°	17/32"	Polished	—	5772A45	00000
				15/16"	13 1/4"	15°	37/64"	15°	19/32"	Dull	—	56945A32	00000
				15/16"	13 1/4"	15°	37/64"	15°	19/32"	Polished	—	5772A46	00000
				1"	14"	15°	37/64"	15°	19/32"	Dull	—	56945A33	00000
				1"	14"	15°	37/64"	15°	19/32"	Polished	—	5772A47	00000
				1 1/16"	15 1/4"	15°	39/64"	15°	5/8"	Dull	—	56945A55	00000
				1 1/16"	15 1/4"	15°	39/64"	15°	5/8"	Polished	—	5772A54	00000
				1 1/8"	16"	15°	41/64"	15°	21/32"	Dull	—	56945A56	00000
				1 3/16"	16"	15°	21/32"	15°	3/4"	Dull	—	56945A57	00000
				1 3/16"	16"	15°	21/32"	15°	3/4"	Polished	—	5772A56	00000
				1 1/4"	17"	15°	45/64"	15°	23/32"	Dull	—	56945A58	00000
				1 1/4"	17"	15°	45/64"	15°	23/32"	Polished	—	5772A57	00000
				7 mm	5 1/4"	15°	15/64"	15°	1/4"	Polished	ASME B107.100	5314A2	00000
				8 mm	5 1/2"	15°	17/64"	15°	9/32"	Polished	ASME B107.100	5314A3	00000
				9 mm	5 3/4"	15°	17/64"	15°	9/32"	Polished	ASME B107.100	5314A4	00000
				10 mm	6 1/4"	15°	5/16"	15°	7/32"	Dull	ASME B107.100	7191A65	00000
				10 mm	6 3/4"	15°	5/16"	15°	13/64"	Polished	ASME B107.100	5314A5	00000
				11 mm	7"	15°	21/64"	15°	11/32"	Dull	ASME B107.100	7191A66	00000
				11 mm	7"	15°	21/64"	15°	11/32"	Polished	ASME B107.100	5314A6	00000
				12 mm	7 3/4"	15°	11/32"	15°	1/4"	Dull	ASME B107.100	7191A67	00000
				12 mm	7 3/4"	15°	11/32"	15°	1/4"	Polished	ASME B107.100	5314A7	00000
				13 mm	8"	15°	11/32"	15°	1/4"	Dull	ASME B107.100	7191A68	00000
				13 mm	8"	15°	11/32"	15°	1/4"	Polished	ASME B107.100	5314A8	00000
				14 mm	8 5/8"	15°	23/64"	15°	3/8"	Dull	ASME B107.100	7191A69	00000
				14 mm	8 5/8"	15°	23/64"	15°	3/8"	Polished	ASME B107.100	5314A9	00000
				15 mm	9 1/8"	15°	23/64"	15°	3/8"	Dull	ASME B107.100	7191A71	00000
				15 mm	9 1/4"	15°	23/64"	15°	3/8"	Polished	ASME B107.100	5314A11	00000
				16 mm	9 3/8"	15°	13/32"	15°	5/16"	Dull	ASME B107.100	7191A72	00000
				16 mm	9 3/8"	15°	13/32"	15°	5/16"	Polished	ASME B107.100	5314A12	00000
				17 mm	10 1/8"	15°	7/16"	15°	21/64"	Dull	ASME B107.100	7191A73	00000
				17 mm	10 1/8"	15°	7/16"	15°	21/64"	Polished	ASME B107.100	5314A13	00000
				18 mm	10 1/2"	15°	29/64"	15°	15/32"	Dull	ASME B107.100	7191A74	00000
				18 mm	10 1/2"	15°	29/64"	15°	15/32"	Polished	ASME B107.100	5314A14	00000
				19 mm	11 1/8"	15°	15/32"	15°	11/32"	Dull	ASME B107.100	7191A75	00000
				19 mm	11 1/8"	15°	15/32"	15°	11/32"	Polished	ASME B107.100	5314A15	00000

				12-Point Opening





			Chrome-Plated Steel
			1/4"		4 1/4"	15°	3/16"	15°	1/8"	Polished	—	5304A39	00000
			1/4"		4 7/8"	15°	15/64"	15°	1/4"	Dull	—	5441A11	00000
			9/32"		5 7/16"	15°	7/32"	15°	5/32"	Polished	—	5441A107	00000
			5/16"		5 3/8"	15°	17/64"	15°	9/32"	Dull	—	5441A12	00000
			5/16"		5 3/4"	15°	7/32"	15°	5/32"	Polished	—	5304A52	00000
			11/32"		5 5/8"	15°	7/32"	15°	3/16"	Polished	—	5314A82	00000
			11/32"		6 1/4"	15°	3/16"	15°	1/4"	Polished	—	5441A13	00000
			3/8"		6 1/4"	15°	5/16"	15°	3/16"	Dull	—	5441A14	00000
			3/8"		6 1/2"	15°	1/4"	15°	3/16"	Polished	—	56255A31	00000
			7/16"		7"	15°	21/64"	15°	11/32"	Dull	—	5441A15	00000
			7/16"		7 1/4"	15°	9/32"	15°	7/32"	Polished	—	56255A32	00000
			1/2"		8"	15°	11/32"	15°	1/4"	Dull	—	5441A16	00000
			1/2"		8"	15°	11/32"	15°	1/4"	Polished	—	56255A33	00000
			9/16"		8 5/8"	15°	23/64"	15°	3/8"	Dull	—	5441A17	00000
			9/16"		8 3/4"	15°	3/8"	15°	1/4"	Polished	—	56255A34	00000
			5/8"		9 1/2"	15°	13/32"	15°	9/32"	Polished	—	56255A35	00000
			5/8"		9 1/2"	15°	13/32"	15°	19/64"	Dull	—	5441A22	00000
			11/16"		10 1/4"	15°	7/16"	15°	5/16"	Dull	—	5441A23	00000
			11/16"		10 1/4"	15°	7/16"	15°	5/16"	Polished	—	56255A36	00000
			3/4"		11"	15°	15/32"	15°	11/32"	Dull	—	5441A24	00000
			3/4"		11"	15°	1/2"	15°	5/16"	Polished	—	56255A37	00000
			13/16"		11 3/4"	15°	17/32"	15°	3/8"	Polished	—	56255A38	00000
			13/16"		11 7/8"	15°	1/2"	15°	23/64"	Dull	—	5441A26	00000
			7/8"		12 1/2"	15°	33/64"	15°	17/32"	Dull	—	5441A27	00000
			7/8"		12 1/2"	15°	9/16"	15°	13/32"	Polished	—	56255A39	00000
			15/16"		13 1/4"	15°	37/64"	15°	19/32"	Dull	—	5441A28	00000
			15/16"		13 1/4"	15°	19/32"	15°	7/16"	Polished	—	56255A41	00000
			1"		14"	15°	37/64"	15°	19/32"	Dull	—	5441A31	00000
			1"		14"	15°	5/8"	15°	15/32"	Polished	—	56255A42	00000
			1 1/16"		14 3/4"	15°	21/32"	15°	1/2"	Polished	—	56255A47	00000
			1 1/16"		15 1/4"	15°	39/64"	15°	5/8"	Dull	—	5441A32	00000
			1 1/8"		15 1/2"	15°	11/16"	15°	17/32"	Polished	—	56255A48	00000
			1 1/8"		16"	15°	41/64"	15°	21/32"	Dull	—	5441A33	00000
			1 3/16"		16"	15°	21/32"	15°	3/4"	Dull	—	5441A38	00000
			1 3/16"		16 1/4"	15°	3/4"	15°	17/32"	Polished	—	56255A49	00000
			1 1/4"		17"	15°	45/64"	15°	23/32"	Dull	—	5441A34	00000
			1 1/4"		17"	15°	3/4"	15°	9/16"	Polished	—	56255A5	00000
			1 5/16"		17 3/4"	15°	47/64"	15°	3/4"	Dull	—	5441A35	00000
			1 5/16"		18 1/2"	15°	17/32"	15°	53/64"	Polished	—	5304A93	000000
			1 3/8"		18 1/2"	15°	17/32"	15°	29/32"	Polished	—	5304A94	000000
			1 3/8"		18 1/2"	15°	25/32"	15°	35/64"	Dull	—	5441A36	00000
			1 7/16"		19 1/2"	15°	19/32"	15°	59/64"	Polished	—	5304A95	000000
			1 7/16"		19 1/2"	15°	51/64"	15°	13/16"	Dull	—	5441A37	00000
			1 1/2"		19 1/2"	15°	19/32"	15°	59/64"	Polished	—	5304A96	000000
			1 1/2"		20 1/2"	15°	53/64"	15°	27/32"	Dull	—	5441A41	000000
			1 5/8"		23"	15°	29/32"	15°	21/32"	Dull	—	5441A42	000000
			1 11/16"		23"	15°	29/32"	15°	21/32"	Dull	—	5441A43	000000
			1 3/4"		25"	15°	31/32"	15°	45/64"	Dull	—	5441A44	000000
			1 13/16"		25"	15°	31/32"	15°	45/64"	Dull	—	5441A45	000000
			1 7/8"		28"	15°	1 1/16"	15°	49/64"	Dull	—	5441A46	000000
			2"		28"	15°	11/16"	15°	49/64"	Dull	—	5441A47	000000
			2 1/16"		29 1/2"	15°	13/16"	15°	27/32"	Dull	—	5441A51	000000
			2 1/8"		29 1/2"	15°	13/16"	15°	27/32"	Dull	—	5441A52	000000
			2 3/16"		29 1/2"	15°	1 3/16"	15°	27/32"	Dull	—	5441A53	000000
			2 1/4"		29 1/2"	15°	1 3/16"	15°	27/32"	Dull	—	5441A54	000000
			2 3/8"		31 1/2"	15°	1 5/16"	15°	31/32"	Dull	—	5441A55	000000
			2 1/2"		31 1/2"	15°	1 5/16"	15°	31/32"	Dull	—	5441A56	000000
			2 9/16"		30"	15°	1 1/2"	15°	1"	Dull	—	5441A95	000000
			2 5/8"		30"	15°	1 11/16"	15°	1"	Dull	—	5441A96	000000
2 3/4"			30"	15°	1 11/16"	15°	1"	Dull	—	5441A97	000000
2 7/8"			32"	15°	1 7/32"	15°	1 5/8"	Dull	—	5441A65	000000
2 15/16"	32"		15°	1 7/32"	15°	1 5/8"	Dull	—	5441A66	000000
3"	32"	15°	1 7/32"	15°	1 5/8"	Dull	—	5441A67	000000
3 1/8"	32"	15°	1 7/32"	15°	1 5/8"	Dull	—	5441A68	000000
6 mm	4 15/16"	15°	11/64"	15°	17/64"	Dull	ASME B107.100	7191A46	00000
6 mm	5"	15°	3/16"	15°	11/64"	Polished	ASME B107.100	5314A29	00000
7 mm	5 3/16"	15°	3/16"	15°	1/4"	Dull	ASME B107.100	7191A51	00000
7 mm	5 1/4"	15°	13/64"	15°	3/16"	Polished	ASME B107.100	5314A31	00000
8 mm	5 1/2"	15°	15/64"	15°	3/16"	Dull	ASME B107.100	7191A11	00000
8 mm	5 1/2"	15°	15/64"	15°	3/16"	Polished	ASME B107.100	5314A32	00000
9 mm	5 13/16"	15°	1/4"	15°	13/64"	Dull	ASME B107.100	7191A12	00000
9 mm	5 7/8"	15°	1/4"	15°	13/64"	Polished	ASME B107.100	5314A33	00000
10 mm	6 1/8"	15°	9/32"	15°	7/32"	Dull	ASME B107.100	7191A13	00000
10 mm	6 1/8"	15°	9/32"	15°	7/32"	Polished	ASME B107.100	5314A51	00000
11 mm	6 1/2"	15°	19/64"	15°	15/64"	Dull	ASME B107.100	7191A14	00000
11 mm	6 1/2"	15°	19/64"	15°	1/4"	Polished	ASME B107.100	5314A52	00000
12 mm	6 7/8"	15°	19/64"	15°	1/4"	Polished	ASME B107.100	5314A53	00000
12 mm	6 7/8"	15°	5/16"	15°	1/4"	Dull	ASME B107.100	7191A15	00000
13 mm	7 1/8"	15°	21/64"	15°	17/64"	Polished	ASME B107.100	5314A54	00000
13 mm	7 3/16"	15°	11/32"	15°	17/64"	Dull	ASME B107.100	7191A16	00000
14 mm	7 15/16"	15°	23/64"	15°	9/32"	Dull	ASME B107.100	7191A17	00000
14 mm	8"	15°	23/64"	15°	9/32"	Polished	ASME B107.100	5314A55	00000
15 mm	8 1/4"	15°	3/8"	15°	19/64"	Polished	ASME B107.100	5314A56	00000
15 mm	8 1/4"	15°	3/8"	15°	5/16"	Dull	ASME B107.100	7191A18	00000
16 mm	8 9/16"	15°	13/32"	15°	21/64"	Dull	ASME B107.100	7191A19	00000
16 mm	8 5/8"	15°	13/32"	15°	5/16"	Polished	ASME B107.100	5314A57	00000
17 mm	9 1/8"	15°	7/16"	15°	11/32"	Dull	ASME B107.100	7191A21	00000
17 mm	9 1/8"	15°	7/16"	15°	11/32"	Polished	ASME B107.100	5314A58	00000
18 mm	9 9/16"	15°	29/64"	15°	11/32"	Dull	ASME B107.100	7191A22	00000
18 mm	9 5/8"	15°	29/64"	15°	11/32"	Polished	ASME B107.100	5314A59	00000
19 mm	10 1/16"	15°	29/64"	15°	23/64"	Dull	ASME B107.100	7191A23	00000
19 mm	10 1/8"	15°	29/64"	15°	23/64"	Polished	ASME B107.100	5314A61	00000
20 mm	10 13/16"	15°	1/2"	15°	27/64"	Dull	ASME B107.100	7191A24	00000
20 mm	10 7/8"	15°	1/2"	15°	27/64"	Polished	ASME B107.100	5314A64	00000
21 mm	11 5/16"	15°	1/2"	15°	7/16"	Dull	ASME B107.100	7191A25	00000
21 mm	11 3/8"	15°	1/2"	15°	7/16"	Polished	ASME B107.100	5314A65	00000
22 mm	11 3/4"	15°	33/64"	15°	7/16"	Polished	ASME B107.100	5314A66	00000
22 mm	11 3/4"	15°	17/32"	15°	27/64"	Dull	ASME B107.100	7191A26	00000
23 mm	12 3/16"	15°	17/32"	15°	29/64"	Polished	—	5314A17	00000
23 mm	12 1/4"	15°	17/32"	15°	29/64"	Dull	ASME B107.100	7191A27	00000
24 mm	12 9/16"	15°	17/32"	15°	15/32"	Polished	ASME B107.100	5314A68	00000
24 mm	12 3/4"	15°	17/32"	15°	15/32"	Dull	ASME B107.100	7191A28	00000
25 mm	13 1/2"	15°	5/8"	15°	15/32"	Dull	ASME B107.100	7191A29	00000
25 mm	14 1/16"	15°	19/32"	15°	27/64"	Polished	ASME B107.100	5314A69	00000
26 mm	14"	15°	5/8"	15°	33/64"	Dull	ASME B107.100	7191A33	00000
26 mm	14 3/4"	15°	19/32"	15°	27/64"	Polished	ASME B107.100	5314A71	00000
27 mm	14 1/2"	15°	21/32"	15°	15/32"	Dull	ASME B107.100	7191A31	00000
27 mm	14 7/8"	15°	39/64"	15°	5/8"	Polished	ASME B107.100	5314A72	00000
28 mm	14 7/8"	15°	41/64"	15°	21/32"	Polished	ASME B107.100	5314A96	00000
28 mm	15 1/4"	15°	11/16"	15°	35/64"	Dull	ASME B107.100	7191A34	00000
29 mm	15 1/4"	15°	11/16"	15°	35/64"	Dull	ASME B107.100	7191A35	00000
29 mm	15 9/16"	15°	23/32"	15°	17/32"	Polished	—	5314A97	00000
30 mm	16"	15°	23/32"	15°	9/16"	Dull	ASME B107.100	7191A36	00000
32 mm	16 3/4"	15°	3/4"	15°	19/32"	Dull	ASME B107.100	7191A32	00000
34 mm	17 13/16"	15°	3/4"	15°	19/32"	Polished	—	5314A38	00000
36 mm	19 5/16"	15°	7/8"	15°	21/32"	Polished	—	5314A39	00000
36 mm	21"	15°	15/16"	15°	3/4"	Dull	ASME B107.100	7191A37	000000
41 mm	23"	15°	15/16"	15°	3/4"	Dull	ASME B107.100	7191A93	000000
46 mm	25 1/2"	15°	1"	15°	13/16"	Dull	ASME B107.100	7191A39	000000
50 mm	28 1/2"	15°	1 1/16"	15°	7/8"	Dull	ASME B107.100	7191A41	000000
55 mm	29"	15°	1 37/64"	15°	63/64"	Dull	ASME B107.100	7191A82	000000
60 mm	29"	15°	1 37/64"	15°	63/64"	Dull	ASME B107.100	7191A83	000000
65 mm	30"	15°	1 11/16"	15°	1 5/32"	Dull	ASME B107.100	7191A84	000000
70 mm	30"	15°	1 11/16"	15°	1 5/32"	Dull	ASME B107.100	7191A85	000000



		Black-Oxide Steel
		1/4"	4 15/16"	15°	13/64"	15°	11/64"	Dull	—	7242A31	00000
		5/16"	5 3/4"	15°	7/32"	15°	5/32"	Dull	—	7242A32	00000
		11/32"	5 1/2"	15°	1/4"	15°	3/16"	Dull	—	7242A33	00000
		3/8"	6 1/2"	15°	1/4"	15°	3/16"	Dull	—	7242A11	00000
		7/16"	7 1/4"	15°	9/32"	15°	7/32"	Dull	—	7242A12	00000
		1/2"	8"	15°	11/32"	15°	1/4"	Dull	—	7242A13	00000
		9/16"	8 3/4"	15°	3/8"	15°	1/4"	Dull	—	7242A14	00000
		5/8"	9 1/2"	15°	13/32"	15°	9/32"	Dull	—	7242A15	00000
		11/16"	10 1/4"	15°	7/16"	15°	5/16"	Dull	—	7242A16	00000
		3/4"	11"	15°	1/2"	15°	5/16"	Dull	—	7242A17	00000
		13/16"	11 3/4"	15°	17/32"	15°	3/8"	Dull	—	7242A18	00000
		7/8"	12 1/2"	15°	9/16"	15°	13/32"	Dull	—	7242A19	00000
		15/16"	13 1/4"	15°	19/32"	15°	7/16"	Dull	—	7242A21	00000
		1"	14"	15°	5/8"	15°	15/32"	Dull	—	7242A22	00000
		1 1/16"	14 3/4"	15°	21/32"	15°	1/2"	Dull	—	7242A23	00000
		1 1/8"	15 1/2"	15°	11/16"	15°	17/32"	Dull	—	7242A24	00000
		1 3/16"	16"	15°	23/32"	15°	17/32"	Dull	—	7242A28	00000
		1 1/4"	17"	15°	3/4"	15°	9/16"	Dull	—	7242A25	00000
		1 5/16"	17 3/4"	15°	3/4"	15°	19/32"	Dull	—	7242A34	00000
		1 3/8"	18 1/2"	15°	3/4"	15°	5/8"	Dull	—	7242A35	00000
		1 7/16"	19 1/4"	15°	7/8"	15°	5/8"	Dull	—	7242A36	00000
		1 1/2"	20 1/16"	15°	7/8"	15°	11/16"	Dull	—	7242A26	00000
		1 9/16"	20 13/16"	15°	7/8"	15°	21/32"	Dull	—	7242A72	000000
		1 5/8"	21 1/2"	15°	7/8"	15°	11/16"	Dull	—	7242A37	000000
		1 11/16"	22 5/16"	15°	7/8"	15°	23/32"	Dull	—	7242A38	000000
		1 3/4"	22 7/8"	15°	1 1/32"	15°	23/32"	Dull	—	7242A39	000000
		1 13/16"	23 1/2"	15°	1 1/32"	15°	3/4"	Dull	—	7242A51	000000
		1 7/8"	24 1/16"	15°	1 1/32"	15°	25/32"	Dull	—	7242A42	000000
		2"	25 1/4"	15°	1 1/32"	15°	27/32"	Dull	—	7242A43	000000
		2 1/16"	25 13/16"	15°	1 5/32"	15°	27/32"	Dull	—	7242A73	000000
		2 1/8"	26 3/8"	15°	1 5/32"	15°	7/8"	Dull	—	7242A55	000000
		2 3/16"	27"	15°	1 5/32"	15°	29/32"	Dull	—	7242A74	000000
		2 1/4"	27 9/16"	15°	1 5/32"	15°	15/16"	Dull	—	7242A47	000000
		2 3/8"	28 3/4"	15°	1 9/32"	15°	31/32"	Dull	—	7242A48	000000
		2 1/2"	29 15/16"	15°	1 9/32"	15°	1 1/32"	Dull	—	7242A49	000000
		2 5/8"	32"	15°	1 5/8"	15°	1 7/32"	Dull	—	7242A57	000000
		2 3/4"	32"	15°	1 5/8"	15°	1 7/32"	Dull	—	7242A58	000000
		2 15/16"	32"	15°	1 5/8"	15°	1 7/32"	Dull	—	7242A61	000000
		3"	32"	15°	1 5/8"	15°	1 7/32"	Dull	—	7242A62	000000
		3 1/8"	37"	15°	1 11/16"	15°	1 3/16"	Dull	—	7242A63	000000
		3 1/4"	37"	15°	2 1/4"	15°	1 1/2"	Dull	—	7242A65	00000000
		3 3/8"	37"	15°	2 1/4"	15°	1 1/2"	Dull	—	7242A66	00000000
		3 1/2"	37"	15°	2 1/4"	15°	1 1/2"	Dull	—	7242A67	00000000
		3 3/4"	40"	15°	2 1/4"	15°	1 1/2"	Dull	—	7242A68	00000000
		3 7/8"	40"	15°	2 1/4"	15°	1 1/2"	Dull	—	7242A69	00000000
		4"	40"	15°	2 1/4"	15°	1 1/2"	Dull	—	7242A71	00000000
		6 mm	4 15/16"	15°	3/16"	15°	11/64"	Dull	ASME B107.100	71405A76	00000
		7 mm	5 3/16"	15°	13/64"	15°	3/16"	Dull	ASME B107.100	71405A32	00000
		8 mm	5 1/2"	15°	15/64"	15°	3/16"	Dull	ASME B107.100	71405A33	00000
		9 mm	5 13/16"	15°	1/4"	15°	13/64"	Dull	ASME B107.100	71405A34	00000
		10 mm	6 1/8"	15°	9/32"	15°	7/32"	Dull	ASME B107.100	71405A35	00000
		11 mm	6 1/2"	15°	5/16"	15°	1/4"	Dull	ASME B107.100	71405A77	00000
		12 mm	6 7/8"	15°	5/16"	15°	1/4"	Dull	ASME B107.100	71405A37	00000
		13 mm	7 3/16"	15°	11/32"	15°	17/64"	Dull	ASME B107.100	71405A38	00000
		14 mm	7 15/16"	15°	23/64"	15°	9/32"	Dull	ASME B107.100	71405A39	00000
		15 mm	8 1/4"	15°	3/8"	15°	5/16"	Dull	ASME B107.100	71405A41	00000
		16 mm	8 9/16"	15°	13/32"	15°	21/64"	Dull	ASME B107.100	71405A42	00000
		17 mm	9 1/8"	15°	7/16"	15°	11/32"	Dull	ASME B107.100	71405A43	00000
		18 mm	9 9/16"	15°	29/64"	15°	11/32"	Dull	ASME B107.100	71405A44	00000
		19 mm	10 1/16"	15°	29/64"	15°	23/64"	Dull	ASME B107.100	71405A45	00000
		20 mm	10 13/16"	15°	1/2"	15°	27/64"	Dull	ASME B107.100	71405A46	00000
21 mm		11 5/16"	15°	1/2"	15°	7/16"	Dull	ASME B107.100	71405A47	00000
22 mm	11 3/4"	15°	17/32"	15°	27/64"	Dull	ASME B107.100	71405A48	00000
23 mm	12 1/4"	15°	17/32"	15°	29/64"	Dull	ASME B107.100	71405A49	00000
24 mm	12 3/4"	15°	17/32"	15°	15/32"	Dull	ASME B107.100	71405A51	00000
75 mm	34"	15°	1 7/8"	15°	1 3/8"	Dull	ASME B107.100	71405A78	000000
80 mm	37"	15°	1 7/8"	15°	1 3/8"	Dull	ASME B107.100	71405A79	000000



		Corrosion-Resistant Wear-Resistant 420 Stainless Steel
		1/4"	3 3/4"	15°	13/64"	15°	1/8"	—	—	91827A019	00000
		5/16"	4 9/16"	15°	15/64"	15°	5/32"	—	—	91827A100	00000
		3/8"	5 3/8"	15°	9/32"	15°	3/16"	—	—	91827A200	00000
		7/16"	5 13/16"	15°	5/16"	15°	3/16"	—	—	91827A300	00000
		1/2"	6 11/16"	15°	21/64"	15°	7/32"	—	—	91827A400	00000
		9/16"	7 1/16"	15°	23/64"	15°	7/32"	—	—	91827A500	00000
		5/8"	7 15/16"	15°	3/8"	15°	1/4"	—	—	91827A601	00000
		11/16"	8 3/8"	15°	13/32"	15°	17/64"	—	—	91827A020	00000
		3/4"	9 3/16"	15°	29/64"	15°	9/32"	—	—	91827A021	00000
		6 mm	3 3/4"	15°	13/64"	15°	1/8"	—	DIN 3113	91827A800	00000
		8 mm	4 9/16"	15°	1/4"	15°	5/32"	—	DIN 3113	91827A900	00000
		10 mm	5 3/8"	15°	9/32"	15°	11/64"	—	DIN 3113	91827A010	00000
		11 mm	5 13/16"	15°	19/64"	15°	3/16"	—	DIN 3113	91827A011	00000
		12 mm	6 1/4"	15°	5/16"	15°	13/64"	—	DIN 3113	91827A012	00000
		13 mm	6 11/16"	15°	21/64"	15°	7/32"	—	DIN 3113	91827A013	00000
		14 mm	7 1/16"	15°	11/32"	15°	7/32"	—	DIN 3113	91827A014	00000
		15 mm	7 1/2"	15°	23/64"	15°	15/64"	—	DIN 3113	91827A015	00000
		16 mm	7 15/16"	15°	3/8"	15°	1/4"	—	DIN 3113	91827A016	00000
		17 mm	8 3/8"	15°	13/32"	15°	17/64"	—	DIN 3113	91827A017	00000
		19 mm	9 3/16"	15°	7/16"	15°	9/32"	—	DIN 3113	91827A018	00000
		21 mm	10"	15°	31/64"	15°	5/16"	—	DIN 3113	91827A111	00000
		22 mm	10 3/8"	15°	1/2"	15°	5/16"	—	DIN 3113	91827A112	00000
		24 mm	11 1/4"	15°	17/32"	15°	21/64"	—	DIN 3113	91827A113	00000
		27 mm	11 7/16"	15°	15/32"	15°	23/64"	—	DIN 3113	91827A114	000000
		30 mm	12 5/8"	15°	1/2"	15°	25/64"	—	DIN 3113	91827A115	000000
		32 mm	13 3/8"	15°	35/64"	15°	7/16"	—	DIN 3113	91827A116	000000
		36 mm	14 3/16"	15°	25/32"	15°	5/8"	—	DIN 3113	91827A117	000000
		38 mm	16 5/16"	15°	13/16"	15°	5/8"	—	DIN 3113	91827A118	000000

Ratcheting Combination Wrenches

12-Point

Opening

Turn nuts and bolts without having to remove and reposition these wrenches. They're commonly used where you don't have enough space for full turns. To switch between loosening and tightening, flip them over.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

			Box End			Open End
	Drive Size	Overall Lg.	Head Offset Angle	Head Thick.	Number of Teeth	Opening Angle	Head Thick.	Appearance	Specs. Met		Each
12-Point Opening





				Chrome-Plated Steel
				1/4"	4 15/16"	—	1/4"	80	15°	1/8"	Polished	—	5163A11	000000
				5/16"	5 7/8"	—	9/32"	80	15°	5/32"	Polished	—	5163A12	00000
				11/32"	6 1/2"	—	5/16"	80	15°	3/16"	Polished	—	5163A13	00000
				3/8"	7 1/16"	—	5/16"	80	15°	3/16"	Polished	—	5163A14	00000
				7/16"	7 1/16"	—	11/32"	80	15°	7/32"	Polished	—	5163A15	00000
				1/2"	8 11/16"	—	13/32"	80	15°	7/32"	Polished	—	5163A16	00000
				9/16"	9 1/4"	—	13/32"	80	15°	1/4"	Polished	—	5163A17	00000
				5/8"	10 5/16"	—	7/16"	80	15°	9/32"	Polished	—	5163A18	00000
				11/16"	10 15/16"	—	15/32"	80	15°	1/2"	Polished	—	5163A19	00000
				3/4"	12"	—	1/2"	80	15°	11/32"	Polished	—	5163A21	00000
				13/16"	11 1/4"	15°	1/2"	72	10°	5/8"	Polished	—	5163A81	00000
				7/8"	11 1/4"	15°	1/2"	72	10°	5/8"	Polished	—	5163A82	00000
				15/16"	13"	15°	1/2"	72	10°	5/8"	Polished	—	5163A83	00000
				1"	13"	15°	1/2"	72	10°	5/8"	Polished	—	5163A84	00000
				1 1/16"	14"	15°	1/2"	72	10°	1/2"	Polished	—	5163A85	00000
				1 1/8"	16 3/4"	15°	5/8"	72	10°	1/2"	Polished	—	5163A86	00000
				1 1/4"	16 3/4"	15°	5/8"	72	10°	1/2"	Polished	—	5163A87	00000
				1 5/16"	18 1/4"	—	11/16"	72	15°	35/64"	Polished	—	5163A51	00000
				1 3/8"	18 1/4"	—	11/16"	72	15°	35/64"	Polished	—	5163A52	00000
				1 7/16"	19 3/4"	—	13/16"	72	15°	21/32"	Polished	—	5163A53	00000
				1 1/2"	19 3/4"	—	13/16"	72	15°	21/32"	Polished	—	5163A54	00000
				1 9/16"	23"	—	55/64"	72	15°	23/32"	Polished	—	5163A55	00000
				1 5/8"	23"	—	55/64"	72	15°	23/32"	Polished	—	5163A56	00000
				1 11/16"	24 1/2"	—	61/64"	72	15°	51/64"	Polished	—	5163A57	000000
				1 3/4"	24 1/2"	—	61/64"	72	15°	51/64"	Polished	—	5163A58	000000
				1 13/16"	25 1/2"	—	63/64"	72	15°	27/32"	Polished	—	5163A59	000000
				1 7/8"	25 1/2"	—	63/64"	72	15°	27/32"	Polished	—	5163A61	000000
				2"	26"	—	1 3/64"	72	15°	27/32"	Polished	—	5163A62	000000
				6 mm	5 3/8"	15°	1/4"	72	10°	1/4"	Polished	—	5163A22	0000
				7 mm	5 3/8"	15°	1/4"	72	10°	1/4"	Polished	—	5163A23	0000
				8 mm	5 3/8"	15°	1/4"	72	10°	1/4"	Polished	—	5163A24	0000
				9 mm	5 5/8"	15°	1/4"	72	10°	1/4"	Polished	—	5163A25	0000
				10 mm	7 1/16"	—	21/64"	80	15°	3/16"	Polished	—	5163A26	00000
				11 mm	7 5/8"	—	11/32"	80	15°	13/64"	Polished	—	5163A27	00000
				12 mm	8 1/8"	—	3/8"	80	15°	7/32"	Polished	—	5163A28	00000
				13 mm	8 11/16"	—	13/32"	80	15°	15/64"	Polished	—	5163A29	00000
				14 mm	9 1/4"	—	13/32"	80	15°	1/4"	Polished	—	5163A31	00000
				15 mm	9 7/8"	—	7/16"	80	15°	3/16"	Polished	—	5163A32	00000
				16 mm	10 5/16"	—	7/16"	80	15°	9/32"	Polished	—	5163A33	00000
				17 mm	10 15/16"	—	15/32"	80	15°	19/64"	Polished	—	5163A34	00000
				18 mm	11 1/2"	—	15/32"	80	15°	5/16"	Polished	—	5163A35	00000
				19 mm	12"	—	1/2"	80	15°	21/64"	Polished	—	5163A36	00000
				20 mm	11"	15°	1/2"	72	10°	3/8"	Polished	—	5163A37	00000
				21 mm	11"	15°	1/2"	72	10°	3/8"	Polished	—	5163A88	00000
				22 mm	11"	15°	1/2"	72	10°	3/8"	Polished	—	5163A89	00000
				23 mm	11"	15°	1/2"	72	10°	3/8"	Polished	—	5163A38	00000
				24 mm	12 3/4"	15°	1/2"	72	10°	3/8"	Polished	—	5163A91	00000
				25 mm	12 3/4"	15°	1/2"	72	10°	3/8"	Polished	—	5163A92	00000
				26 mm	12 3/4"	15°	1/2"	72	10°	3/8"	Polished	—	5163A39	00000
				27 mm	14 1/4"	15°	1/2"	72	10°	1/2"	Polished	—	5163A93	00000
				28 mm	14 1/4"	15°	1/2"	72	10°	1/2"	Polished	—	5163A47	00000
				30 mm	16 3/4"	15°	5/8"	72	10°	1/2"	Polished	—	5163A94	00000
				32 mm	16 3/4"	15°	5/8"	72	10°	1/2"	Polished	—	5163A95	00000
				34 mm	18 1/4"	—	11/16"	72	15°	35/64"	Polished	ASME B107.100	5163A63	00000
				36 mm	19 3/4"	—	13/16"	72	15°	21/32"	Polished	ASME B107.100	5163A64	00000
				41 mm	23"	—	55/64"	72	15°	23/32"	Polished	ASME B107.100	5163A65	00000
				46 mm	25 1/2"	—	63/64"	72	15°	27/32"	Polished	ASME B107.100	5163A66	000000
				50 mm	26"	—	1 3/64"	72	15°	27/32"	Polished	ASME B107.100	5163A67	000000

Combination Wrench Sets


Fabric Pouch	Fabric Roll-Up Pouch

Plastic Organizer	Plastic Roll-Up Pouch


12-Point Opening	6-Point Opening

With a range of drive sizes and lengths, these wrench sets are your go-to for routine maintenance. With two different ends, you need fewer tools to tighten and loosen nuts and bolts. The open end slides onto the side of fasteners for adjustments in tight spots. When nuts and bolts won't budge, the box end fully encircles them to apply maximum torque.

6-Point Opening—Avoid rounding off the corners of hex fasteners. These wrenches won't slip, even when nuts and bolts are rusted or damaged, since they grip the sides rather than the corners.

Standard—Made in the U.S. from high-strength steel or stainless steel, these wrenches are built to last. They’re indispensable for daily maintenance and repair.

Economy—Fill out your tool kit for a few dollars per wrench. Typically imported, these cost-friendly sets are the right choice for occasional maintenance.

Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

Black-Oxide Steel—The dark, matte coating protects these wrenches from wear and won't flake off. They offer minimal corrosion resistance, though, so they're best for dry environments.

	Box-End Head Offset Angle	Open-End Opening Angle	Appearance	Material	Container Type	Specs. Met		Each
Standard





	6-Point Opening
	7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	6 1/4" to 11"	15°	15°	Polished	Chrome-Plated Steel	Plastic Roll-Up Pouch	—	5772A51	0000000
	8	5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	5 3/8" to 11"	15°	15°	Dull	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	56945A35	000000
	11	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"	6 1/4" to 14"	15°	15°	Polished	Chrome-Plated Steel	Plastic Roll-Up Pouch	—	5772A52	000000
	11	7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm	5 3/16" to 11 1/16"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	5314A16	000000



			12-Point Opening
			7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	6" to 10 1/8"	15°	15°	Dull	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	5444A3	000000
			7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	6" to 10 1/8"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	5304A91	00000
			7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	6 1/2" to 11"	15°	15°	Dull	Black-Oxide Steel	Plastic Roll-Up Pouch	—	7242A41	000000
			9	1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	3 3/4" to 9 3/16"	15°	15°	—	420 Stainless Steel	—	—	91827A701	000000
			11	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"	6" to 13 1/2"	15°	15°	Dull	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	5444A4	000000
			11	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"	6" to 13 1/2"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	5304A71	000000
			11	6 mm, 8 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 19 mm	3 3/4" to 9 3/16"	15°	15°	—	420 Stainless Steel	—	DIN 3113	91827A022	000000
			11	7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm	5 1/4" to 10 1/8"	15°	15°	Dull	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	5140A15	000000
			11	7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm	5 1/4" to 10 1/8"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	5314A26	000000
			14	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4"	6" to 17"	15°	15°	Dull	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	5444A2	000000
			14	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4"	6" to 17"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	5304A73	000000
			15	5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4"	5 3/4" to 17 1/4"	15°	15°	Dull	Black-Oxide Steel	Plastic Roll-Up Pouch	—	7242A45	000000
			15	7 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm, 24 mm, 26 mm, 27 mm, 30 mm, 32 mm	5 3/8" to 17"	15°	15°	Polished	Chrome-Plated Steel	Fabric Pouch	—	5314A99	000000
			17	6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm	5" to 11 3/4"	15°	15°	Dull	Chrome-Plated Steel	Fabric Pouch	—	5140A12	000000
			18	7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm	5 1/4" to 12 3/4"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	ASME B107.100	5314A62	000000

			Economy





							12-Point Opening
							6	1/4", 3/8", 7/16", 1/2", 9/16", 5/8"	6 1/2" to 10 3/16"	15°	15°	Polished	Steel	Plastic Organizer	—	5201A9	00000
							6	10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm	7 5/16" to 10 3/16"	15°	15°	Polished	Steel	Plastic Organizer	—	5068A8	00000
							11	1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"	5 1/8" to 13 1/2"	15°	15°	Polished	Chrome-Plated Steel	Plastic Organizer	—	5201A6	00000
							11	7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm	5 1/8" to 9 7/8"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	5068A6	00000
							14	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4"	5 1/8" to 17"	15°	15°	Dull	Chrome-Plated Steel	Plastic Roll-Up Pouch	—	5201A8	00000
							14	6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	3 19/32" to 8 41/64"	15°	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	5068A9	00000
							22	1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	4" to 10 7/32"	15°	15°	Dull	Chrome-Plated Steel	Plastic Organizer	—	4777N11	00000

Stubby Combination Wrenches


12-Point Opening	6-Point Opening

Turn nuts and bolts in tight spaces. These wrenches are up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. However, you may need longer wrenches for higher-leverage jobs.

6-Point Opening—Avoid rounding off the corners of hex fasteners. These wrenches won't slip, even when nuts and bolts are rusted or damaged, since they grip the sides rather than the corners.

Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

			Box End		Open End
	Drive Size	Overall Lg.	Head Offset Angle	Head Thick.	Opening Angle	Head Thick.	Appearance	Specs. Met		Each
6-Point Opening





				Chrome-Plated Steel
				1/8"	2 11/16"	15°	1/8"	15°	1/8"	Polished	—	5772A21	000000
				5/32"	2 13/16"	15°	1/8"	15°	5/32"	Polished	—	56945A12	00000
				5/32"	2 7/8"	15°	5/32"	15°	1/8"	Polished	—	5772A22	00000
				3/16"	3"	15°	5/32"	15°	1/8"	Polished	—	5772A23	00000
				3.2 mm	2 3/4"	15°	3/32"	22.5°	3/32"	Polished	—	5314A35	00000
				3.5 mm	2 3/4"	15°	3/32"	22.5°	3/32"	Polished	—	5314A36	00000
				4 mm	2 3/4"	15°	3/32"	22.5°	3/32"	Polished	—	5314A83	00000
				4.5 mm	3 1/8"	15°	5/32"	22.5°	3/32"	Polished	—	5314A37	00000
				5 mm	3 1/8"	15°	5/32"	22.5°	3/32"	Polished	—	5314A84	00000
				5.5 mm	3 1/8"	15°	5/32"	22.5°	3/32"	Polished	—	5314A85	00000
				5.5 mm	3 3/8"	15°	5/32"	15°	5/32"	Dull	—	55715A25	00000
				7 mm	4"	15°	11/64"	15°	15/64"	Polished	—	5314A87	00000
				8 mm	4 1/2"	15°	3/16"	15°	17/64"	Polished	—	5314A88	00000

				12-Point Opening





								Chrome-Plated Steel
								13/64"	3 1/8"	15°	1/8"	15°	1/8"	Polished	—	5304A84	00000
								15/64"	3 1/4"	15°	3/32"	15°	1/8"	Polished	—	5304A86	00000
								1/4"	3 1/4"	15°	3/16"	15°	11/64"	Polished	—	5443A26	00000
								9/32"	3 3/8"	15°	7/32"	15°	3/16"	Polished	—	5443A32	00000
								5/16"	3 1/2"	15°	15/64"	15°	1/4"	Polished	—	5443A28	00000
								11/32"	3 5/8"	15°	1/4"	15°	13/64"	Polished	—	5304A32	00000
								3/8"	3 3/4"	15°	9/32"	15°	7/32"	Polished	—	5443A29	00000
								7/16"	3 15/16"	15°	19/64"	15°	5/16"	Polished	—	5304A12	00000
								1/2"	4 5/16"	15°	23/64"	15°	3/8"	Polished	—	5304A13	00000
								9/16"	4 1/2"	15°	3/8"	15°	19/64"	Polished	—	5304A14	00000
								5/8"	4 7/8"	15°	27/64"	15°	7/16"	Polished	—	5304A15	00000
								11/16"	5 1/16"	15°	29/64"	15°	15/32"	Polished	—	5304A16	00000
								3/4"	5 7/16"	15°	31/64"	15°	1/2"	Polished	—	5304A17	00000
								6 mm	3 1/4"	15°	3/16"	15°	11/64"	Polished	ASME B107.100	55715A26	00000
								7 mm	3 3/8"	15°	7/32"	15°	3/16"	Polished	ASME B107.100	55715A27	00000
								8 mm	3 1/2"	15°	15/64"	15°	1/4"	Polished	ASME B107.100	55715A28	00000
								9 mm	3 5/8"	15°	1/4"	15°	13/64"	Polished	ASME B107.100	55715A29	00000
								10 mm	3 3/4"	15°	9/32"	15°	7/32"	Polished	ASME B107.100	55715A3	00000
								11 mm	3 15/16"	15°	19/64"	15°	5/16"	Polished	ASME B107.100	55715A31	00000
								12 mm	4 1/8"	15°	21/64"	15°	11/32"	Polished	ASME B107.100	55715A32	00000
								13 mm	4 5/16"	15°	23/64"	15°	3/8"	Polished	ASME B107.100	55715A33	00000
								14 mm	4 1/2"	15°	3/8"	15°	19/64"	Polished	ASME B107.100	55715A34	00000
								15 mm	4 11/16"	15°	25/64"	15°	13/32"	Polished	ASME B107.100	55715A35	00000
								16 mm	4 7/8"	15°	27/64"	15°	7/16"	Polished	ASME B107.100	55715A36	00000
								17 mm	5 1/16"	15°	29/64"	15°	15/32"	Polished	ASME B107.100	55715A37	00000
								18 mm	5 1/4"	15°	15/32"	15°	11/32"	Polished	ASME B107.100	55715A38	00000
								19 mm	5 7/16"	15°	31/64"	15°	1/2"	Polished	ASME B107.100	55715A39	00000

Spline Ratcheting Combination Wrenches

Spline Opening

These versatile wrenches turn hex, 12-point, and spline fasteners. With more points of contact than 12-point openings, the spline-shaped box end gets a better grip on nuts and bolts and is less likely to round off corners. Rotate these wrenches without having to remove and reposition them. They're commonly used where you don't have enough space for full turns. To switch between loosening and tightening, flip them over.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

			Box End				Open End
	Drive Size	Overall Lg.	External Spline Drive Size	Head Offset Angle	Head Thick.	Number of Teeth	Opening Angle	Head Thick.	Appearance		Each
Spline Opening





				Chrome-Plated Steel
				1/4"	5 5/32"	No. 8	15°	1/4"	72	15°	11/64"	Polished	4950A31	000000
				9/32"	5 11/64"	No. 9	15°	17/64"	72	15°	11/64"	Polished	4950A32	00000
				5/16"	5 7/16"	No. 10	15°	17/64"	72	15°	11/64"	Polished	4950A61	00000
				11/32"	5 21/32"	No. 11	15°	17/64"	72	15°	3/16"	Polished	4950A33	00000
				3/8"	5 59/64"	No. 12	15°	19/64"	72	15°	13/64"	Polished	4950A62	00000
				7/16"	6 29/32"	No. 14	15°	19/64"	72	15°	15/64"	Polished	4950A63	00000
				1/2"	7 57/64"	No. 16	15°	11/32"	72	15°	1/4"	Polished	4950A64	00000
				9/16"	8 3/4"	No. 18	15°	23/64"	72	15°	9/32"	Polished	4950A65	00000
				5/8"	9 1/2"	No. 20	15°	25/64"	72	15°	5/16"	Polished	4950A66	00000
				11/16"	10 1/4"	No. 22	15°	13/32"	72	15°	21/64"	Polished	4950A67	00000
				3/4"	11 1/64"	No. 24	15°	7/16"	72	15°	11/32"	Polished	4950A68	00000
				13/16"	11 13/16"	No. 26	15°	33/64"	72	15°	23/64"	Polished	4950A34	00000
				7/8"	12 37/64"	No. 28	15°	33/64"	72	15°	3/8"	Polished	4950A35	00000
				15/16"	13 5/16"	No. 30	15°	37/64"	72	15°	13/32"	Polished	4950A36	00000
				1"	14 1/64"	No. 32	15°	37/64"	72	15°	7/16"	Polished	4950A37	00000
				1 1/16"	14 15/16"	No. 34	15°	39/64"	72	15°	15/32"	Polished	4950A38	000000
				1 1/8"	15 53/64"	No. 36	15°	43/64"	72	15°	1/2"	Polished	4950A39	000000
				1 1/4"	16 7/8"	No. 40	15°	11/16"	72	15°	35/64"	Polished	4950A41	000000
				6 mm	5 5/32"	No. 6	15°	1/4"	72	15°	11/64"	Polished	4950A42	00000
				7 mm	5 11/64"	No. 7	15°	17/64"	72	15°	11/64"	Polished	4950A43	00000
				8 mm	5 7/16"	No. 8	15°	17/64"	72	15°	11/64"	Polished	4950A71	00000
				9 mm	5 21/32"	No. 9	15°	9/32"	72	15°	3/16"	Polished	4950A44	00000
				10 mm	5 59/64"	No. 10	15°	19/64"	72	15°	13/64"	Polished	4950A72	00000
				11 mm	6 29/32"	No. 11	15°	19/64"	72	15°	7/32"	Polished	4950A73	00000
				12 mm	7 27/64"	No. 12	15°	21/64"	72	15°	15/64"	Polished	4950A74	00000
				13 mm	7 57/64"	No. 13	15°	11/32"	72	15°	1/4"	Polished	4950A75	00000
				14 mm	8 3/4"	No. 14	15°	23/64"	72	15°	9/32"	Polished	4950A45	00000
				15 mm	9 9/64"	No. 15	15°	3/8"	72	15°	19/64"	Polished	4950A46	00000
				16 mm	9 1/2"	No. 16	15°	25/64"	72	15°	19/64"	Polished	4950A76	00000
				17 mm	10 9/32"	No. 17	15°	13/32"	72	15°	21/64"	Polished	4950A47	00000
				18 mm	10 43/64"	No. 18	15°	27/64"	72	15°	21/64"	Polished	4950A77	00000
				19 mm	11 1/64"	No. 19	15°	7/16"	72	15°	11/32"	Polished	4950A78	00000
				21 mm	11 13/16"	No. 21	15°	33/64"	72	15°	23/64"	Polished	4950A48	00000
				22 mm	12 37/64"	No. 22	15°	33/64"	72	15°	3/8"	Polished	4950A49	00000
				24 mm	13 5/16"	No. 24	15°	37/64"	72	15°	13/32"	Polished	4950A51	00000
				27 mm	14 15/16"	No. 27	15°	39/64"	72	15°	15/32"	Polished	4950A52	000000
				30 mm	15 13/16"	No. 30	15°	43/64"	72	15°	1/2"	Polished	4950A53	000000
				32 mm	16 55/64"	No. 32	15°	11/16"	72	15°	35/64"	Polished	4950A54	000000

Reversible Ratcheting Combination Wrench Sets


Fabric Roll-Up Pouch	Plastic Roll-Up Pouch	Plastic Tray

12-Point

Opening

With the flick of a lever, the wrenches in these sets go from loosening nuts and bolts to tightening them. Unlike other ratcheting wrenches, you can turn in either direction without having to flip them over. They're ideal for jobs with frequent pivots between tightening and loosening, such as assembly line maintenance.

Standard—Made in the U.S. from high-strength steel or stainless steel, these wrenches are built to last. They’re indispensable for daily maintenance and repair.

Economy—Fill out your tool kit for a few dollars per wrench. Typically imported, these cost-friendly sets are the right choice for occasional maintenance.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

				Box End
	No. of Pieces	Drive Size	Overall Lg.	Head Offset Angle	Number of Teeth	Open-End Opening Angle	Appearance	Material	Container Type	Specs. Met		Each
Standard





				12-Point Opening
				7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	7 1/16" to 12"	15°	80	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	5160A33	0000000
				10	10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	7 1/16" to 12"	15°	80	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	5160A34	000000

				Economy





								12-Point Opening
								4	13/16", 7/8", 15/16", 1"	10 1/2" to 13"	15°	72	15°	Polished	Chrome-Plated Steel	Plastic Tray	ASME B107.100	6871A412	000000
								4	21 mm, 22 mm, 24 mm, 25 mm	5 1/4" to 9 3/4"	15°	72	15°	Polished	Chrome-Plated Steel	Plastic Roll-Up Pouch	ASME B107.100	6871A411	000000
								7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	6 1/4" to 9 5/8"	15°	72	15°	Polished	Chrome-Plated Steel	Plastic Roll-Up Pouch	—	6871A21	000000
								8	8 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm	5 1/2" to 9 5/8"	15°	72	15°	Polished	Chrome-Plated Steel	Plastic Tray	ASME B107.100	6871A31	000000

Reversible Ratcheting Combination Wrenches

12-Point

Opening

With the flick of a lever, these wrenches go from loosening nuts and bolts to tightening them. Unlike other ratcheting wrenches, you can turn in either direction without having to flip them over. They're ideal for jobs with frequent pivots between tightening and loosening, such as assembly line maintenance.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

			Box End			Open End
	Drive Size	Overall Lg.	Head Offset Angle	Head Thick.	Number of Teeth	Opening Angle	Head Thick.	Appearance		Each
12-Point Opening





				Chrome-Plated Steel
				5/16"	5 7/8"	15°	9/32"	80	15°	5/32"	Polished	5160A2	000000
				3/8"	7 1/16"	15°	5/16"	80	15°	3/16"	Polished	5160A3	00000
				7/16"	7 1/16"	15°	11/32"	80	15°	7/32"	Polished	5160A4	00000
				1/2"	8 11/16"	15°	13/32"	80	15°	7/32"	Polished	5160A5	00000
				9/16"	9 1/4"	15°	13/32"	80	15°	1/4"	Polished	5160A6	00000
				5/8"	10 5/16"	15°	7/16"	80	15°	9/32"	Polished	5160A7	00000
				11/16"	10 15/16"	15°	15/32"	80	15°	1/2"	Polished	5160A8	00000
				3/4"	12"	15°	1/2"	80	15°	11/32"	Polished	5160A9	00000
				13/16"	10 1/2"	15°	17/32"	80	15°	3/8"	Polished	5160A515	00000
				7/8"	11 7/16"	15°	19/32"	80	15°	11/32"	Polished	5160A516	00000
				15/16"	12"	15°	5/8"	80	15°	15/32"	Polished	5160A517	00000
				1"	13"	15°	5/8"	80	15°	15/32"	Polished	5160A518	00000
				8 mm	5 7/8"	15°	9/32"	80	15°	3/16"	Polished	5160A21	00000
				9 mm	6 7/16"	15°	5/16"	80	15°	5/32"	Polished	5160A411	00000
				10 mm	7 1/16"	15°	21/64"	80	15°	13/64"	Polished	5160A22	00000
				11 mm	7 5/8"	15°	11/32"	80	15°	7/32"	Polished	5160A23	00000
				12 mm	8 1/8"	15°	3/8"	80	15°	15/64"	Polished	5160A24	00000
				13 mm	8 11/16"	15°	13/32"	80	15°	1/4"	Polished	5160A25	00000
				14 mm	9 1/4"	15°	13/32"	80	15°	17/64"	Polished	5160A26	00000
				15 mm	9 13/16"	15°	7/16"	80	15°	9/32"	Polished	5160A27	00000
				16 mm	10 5/16"	15°	7/16"	80	15°	19/64"	Polished	5160A28	00000
				17 mm	10 15/16"	15°	15/32"	80	15°	5/16"	Polished	5160A29	00000
				18 mm	11 1/2"	15°	15/32"	80	15°	21/64"	Polished	5160A31	00000
				19 mm	12"	15°	1/2"	80	15°	11/32"	Polished	5160A32	00000
				21 mm	10 3/4"	15°	9/16"	80	15°	3/8"	Polished	5160A511	00000
				22 mm	11 1/4"	15°	19/32"	80	15°	3/8"	Polished	5160A512	00000
				24 mm	12"	15°	5/8"	80	15°	15/32"	Polished	5160A513	00000
				25 mm	13"	15°	5/8"	80	15°	15/32"	Polished	5160A514	00000

Flex-Head Ratcheting Combination Wrenches

12-Point

Opening

Access hard-to-reach fasteners without needing to remove obstructions. These wrenches are particularly useful where components are packed tightly, such as HVAC systems and conveyors. The box end swivels a full 180° to pivot around obstacles and give you leverage even at awkward angles. To switch between loosening and tightening, flip these wrenches over.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

			Box End			Open End
	Drive Size	Overall Lg.	Head Thick.	Flex Range of Motion	Number of Teeth	Opening Angle	Head Thick.	Appearance		Each
12-Point Opening





				Chrome-Plated Steel
				5/16"	5 11/16"	17/64"	180°	90	15°	3/16"	Polished	6445A211	000000
				11/32"	6 3/16"	17/64"	180°	90	15°	7/32"	Polished	6445A31	00000
				3/8"	6 1/4"	5/16"	180°	90	15°	7/32"	Polished	6445A212	00000
				7/16"	7 1/8"	21/64"	180°	90	15°	1/4"	Polished	6445A213	00000
				1/2"	7 13/16"	11/32"	180°	90	15°	5/16"	Polished	6445A214	00000
				9/16"	8 3/8"	3/8"	180°	90	15°	21/64"	Polished	6445A215	00000
				5/8"	9 1/4"	13/32"	180°	90	15°	11/32"	Polished	6445A216	00000
				11/16"	9 7/8"	27/64"	180°	90	15°	23/64"	Polished	6445A32	00000
				3/4"	10 7/8"	7/16"	180°	90	15°	3/8"	Polished	6445A217	00000
				13/16"	11 1/2"	33/64"	180°	90	15°	3/8"	Polished	6445A33	00000
				7/8"	11 1/2"	33/64"	180°	90	15°	3/8"	Polished	6445A34	00000
				15/16"	13 1/8"	37/64"	180°	90	15°	27/64"	Polished	6445A35	00000
				1"	13 1/8"	37/64"	180°	90	15°	27/64"	Polished	6445A36	00000
				8 mm	5 11/16"	17/64"	180°	90	15°	3/16"	Polished	6445A221	00000
				9 mm	6 3/16"	17/64"	180°	90	15°	7/32"	Polished	6445A37	00000
				10 mm	6 11/16"	19/64"	180°	90	15°	7/32"	Polished	6445A222	00000
				11 mm	7 1/8"	21/64"	180°	90	15°	1/4"	Polished	6445A38	00000
				12 mm	7 7/16"	11/32"	180°	90	15°	19/64"	Polished	6445A223	00000
				13 mm	7 13/16"	11/32"	180°	90	15°	5/16"	Polished	6445A224	00000
				14 mm	8 3/8"	3/8"	180°	90	15°	21/64"	Polished	6445A225	00000
				15 mm	8 7/8"	25/64"	180°	90	15°	21/64"	Polished	6445A226	00000
				16 mm	9 1/4"	13/32"	180°	90	15°	11/32"	Polished	6445A39	00000
				17 mm	9 7/8"	27/64"	180°	90	15°	23/64"	Polished	6445A41	00000
				18 mm	10 3/8"	7/16"	180°	90	15°	3/8"	Polished	6445A227	00000
				19 mm	10 7/8"	7/16"	180°	90	15°	3/8"	Polished	6445A42	00000

High-Leverage Combination Wrenches

12-Point

Opening

Loosen stubborn and rusted nuts and bolts without breaking a sweat. Up to 3 inches longer than standard wrenches, they give you the same torque with less effort. However, you'll need room to turn these wrenches, so consider a standard- or stubby-length wrench if you're in a tight spot.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

			Box End		Open End
	Drive Size	Overall Lg.	Head Offset Angle	Head Thick.	Opening Angle	Head Thick.	Appearance	Specs. Met		Each
12-Point Opening





				Chrome-Plated Steel
				9/16"	10"	15°	3/8"	15°	9/32"	Polished	—	5441A111	000000
				5/8"	11"	15°	13/32"	15°	9/32"	Polished	—	5441A112	00000
				11/16"	12"	15°	13/32"	15°	5/16"	Polished	—	5441A113	000000
				3/4"	13"	15°	7/16"	15°	11/32"	Polished	—	5441A114	000000
				13/16"	14"	15°	17/32"	15°	3/8"	Polished	—	5441A98	000000
				1"	17"	15°	5/8"	15°	7/16"	Polished	—	5441A99	000000
				13 mm	9"	15°	9/32"	15°	1/4"	Polished	ASME B107.100	5441A1	00000
				14 mm	10"	15°	11/32"	15°	9/32"	Polished	ASME B107.100	5441A101	00000
				15 mm	10 1/2"	15°	3/8"	15°	9/32"	Polished	ASME B107.100	5441A102	00000
				16 mm	11"	15°	13/32"	15°	9/32"	Polished	ASME B107.100	5441A103	00000
				17 mm	12"	15°	13/32"	15°	5/16"	Polished	ASME B107.100	5441A104	000000
				18 mm	12 1/2"	15°	13/32"	15°	11/32"	Polished	ASME B107.100	5441A105	000000
				19 mm	13"	15°	7/16"	15°	11/32"	Polished	ASME B107.100	5441A106	000000

Flex-Head Ratcheting Combination Wrench Sets

12-Point

Opening

Access a range of hard-to-reach fasteners without needing to remove obstructions. These wrenches are particularly useful where components are packed tightly, such as HVAC systems and conveyors. The box end swivels a full 180° to pivot around obstacles and give you leverage even at awkward angles. To switch between loosening and tightening, flip these wrenches over.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

				Box End
	No. of Pieces	Drive Size	Overall Lg.	Flex Range of Motion	Number of Teeth	Open-End Opening Angle	Appearance	Material		Each
12-Point Opening


		10	1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	5 1/2" to 9 3/4"	180°	90	15°	Polished	Chrome-Plated Steel	6445A51	0000000
		12	8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	5 1/2" to 9 5/16"	180°	90	15°	Polished	Chrome-Plated Steel	6445A52	000000

Ratcheting Combination Wrench Sets

12-Point

Opening

Turn a variety of nuts and bolts without having to remove and reposition these wrenches. They're commonly used where you don't have enough space for full turns. Just flip them over when you need to switch between tightening and loosening.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

	Drive Size	Overall Lg.	No. of Teeth	Open-End Opening Angle	Appearance	Material	Container Type		Each
12-Point Opening


	7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	7 1/16" to 12"	80	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	5163A41	0000000
	10	1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	4 15/16" to 12"	80	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	5163A43	000000
	10	10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	7 1/16" to 12"	80	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	5163A42	000000

Stubby Reversible Ratcheting Combination Wrenches

12-Point

Opening

The ultimate tool for ratcheting in tight spaces. They’re up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. With the flick of a lever, these wrenches go from loosening nuts and bolts to tightening them.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

			Box End			Open End
	Drive Size	Overall Lg.	Head Offset Angle	Head Thick.	Number of Teeth	Opening Angle	Head Thick.	Appearance		Each
12-Point Opening





				Chrome-Plated Steel
				5/16"	3 1/2"	15°	9/32"	72	15°	5/32"	Polished	5666A718	000000
				3/8"	3 7/8"	15°	11/32"	72	15°	3/16"	Polished	5666A719	00000
				7/16"	4"	15°	11/32"	72	15°	7/32"	Polished	5666A2	00000
				1/2"	4 1/2"	15°	13/32"	72	15°	1/4"	Polished	5666A21	00000
				9/16"	4 11/16"	15°	13/32"	72	15°	1/4"	Polished	5666A22	00000
				5/8"	5"	15°	15/32"	72	15°	9/32"	Polished	5666A721	00000
				11/16"	5 1/4"	15°	1/2"	72	15°	9/32"	Polished	5666A722	00000
				3/4"	5 1/2"	15°	17/32"	72	15°	11/32"	Polished	5666A23	00000
				8 mm	3 1/2"	15°	9/32"	72	15°	5/32"	Polished	5666A24	00000
				9 mm	3 3/4"	15°	5/16"	72	15°	5/32"	Polished	5666A711	00000
				10 mm	3 7/8"	15°	11/32"	72	15°	3/16"	Polished	5666A25	00000
				11 mm	4 1/8"	15°	11/32"	72	15°	7/32"	Polished	5666A712	00000
				12 mm	4 1/4"	15°	3/8"	72	15°	7/32"	Polished	5666A713	00000
				13 mm	4 1/2"	15°	13/32"	72	15°	1/4"	Polished	5666A26	00000
				14 mm	4 11/16"	15°	13/32"	72	15°	1/4"	Polished	5666A714	00000
				15 mm	4 7/8"	15°	7/16"	72	15°	9/32"	Polished	5666A715	00000
				16 mm	5"	15°	15/32"	72	15°	9/32"	Polished	5666A716	00000
				17 mm	5 3/16"	15°	1/2"	72	15°	9/32"	Polished	5666A27	00000
				18 mm	5 1/4"	15°	1/2"	72	15°	5/16"	Polished	5666A717	00000
				19 mm	5 1/2"	15°	17/32"	72	15°	11/32"	Polished	5666A28	00000

Nonsparking Combination Wrenches

12-Point

Opening

Made of aluminum bronze that is FM approved, these wrenches won't create sparks even when scraped, struck, or dropped. They help you meet OSHA requirements when turning nuts and bolts in hazardous environments with flammable vapors, liquids, or dust. Use them everywhere from oil refineries to chemicals plants.

Warning: Do not use these tools in direct contact with acetylene.

			Box End		Open End
	Drive Size	Overall Lg.	Head Offset Angle	Head Thick.	Opening Angle	Head Thick.	Certification		Each
12-Point Opening





				Aluminum Bronze
				3/8"	6 1/4"	15°	3/8"	15°	15/64"	FM Approved	6506A12	000000
				7/16"	6 7/8"	15°	3/8"	15°	15/64"	FM Approved	6506A13	00000
				1/2"	7 1/2"	15°	27/64"	15°	17/64"	FM Approved	6506A14	00000
				9/16"	8"	15°	27/64"	15°	17/64"	FM Approved	6506A15	00000
				5/8"	8 7/8"	15°	15/32"	15°	9/32"	FM Approved	6506A16	00000
				11/16"	9 5/8"	15°	31/64"	15°	23/64"	FM Approved	6506A17	000000
				3/4"	10 3/4"	15°	31/64"	15°	23/64"	FM Approved	6506A18	000000
				7/8"	11 5/8"	15°	33/64"	15°	3/8"	FM Approved	6506A19	000000
				15/16"	12 7/8"	15°	9/16"	15°	27/64"	FM Approved	6506A33	000000
				1"	14"	15°	9/16"	15°	27/64"	FM Approved	6506A21	000000
				1 1/16"	14"	15°	9/16"	15°	27/64"	FM Approved	6506A22	000000
				1 1/8"	15 3/8"	15°	11/16"	15°	31/64"	FM Approved	6506A23	000000
				1 1/4"	17"	15°	11/16"	15°	31/64"	FM Approved	6506A24	000000
				1 5/16"	17"	15°	11/16"	15°	31/64"	FM Approved	6506A25	000000
				1 3/8"	19"	15°	45/64"	15°	9/16"	FM Approved	6506A26	000000
				1 7/16"	19"	15°	45/64"	15°	9/16"	FM Approved	6506A27	000000
				1 1/2"	19"	15°	45/64"	15°	9/16"	FM Approved	6506A28	000000
				1 5/8"	20 7/8"	15°	49/64"	15°	19/32"	FM Approved	6506A29	000000
				8 mm	4 1/2"	15°	3/16"	15°	5/16"	FM Approved	6506A51	00000
				10 mm	6 3/8"	15°	3/16"	15°	5/16"	FM Approved	6506A52	00000
				11 mm	6 7/8"	15°	1/4"	15°	3/8"	FM Approved	6506A31	00000
				12 mm	7 1/2"	15°	5/16"	15°	7/16"	FM Approved	6506A32	00000
				13 mm	8 1/8"	15°	5/16"	15°	7/16"	FM Approved	6506A53	00000
				14 mm	8 1/8"	15°	5/16"	15°	7/16"	FM Approved	6506A34	00000
				15 mm	8 7/8"	15°	5/16"	15°	1/2"	FM Approved	6506A35	00000
				16 mm	8 7/8"	15°	5/16"	15°	1/2"	FM Approved	6506A36	00000
				17 mm	9 5/8"	15°	3/8"	15°	1/2"	FM Approved	6506A54	000000
				18 mm	9 5/8"	15°	3/8"	15°	1/2"	FM Approved	6506A37	000000
				19 mm	10 5/8"	15°	3/8"	15°	1/2"	FM Approved	6506A55	000000
				22 mm	11 5/8"	15°	3/8"	15°	9/16"	FM Approved	6506A56	000000

Spline Ratcheting Combination Wrench Sets

Spline Opening

These versatile wrenches turn a range of hex, 12-point, and spline fasteners. With more points of contact than 12-point openings, the spline-shaped box end gets a better grip on nuts and bolts and is less likely to round off corners. Rotate these wrenches without having to remove and reposition them. They're commonly used where you don't have enough space for full turns. To switch between loosening and tightening, flip them over.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

			Box End
	No. of Pieces	Drive Size	External Spline Drive Size	Number of Teeth	Overall Lg.	Open-End Opening Angle	Appearance	Material	Container Type		Each
Spline Opening


		11	1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	No. 8, No. 9, No. 10, No. 11, No. 12, No. 14, No. 16, No. 18, No. 20, No. 22, No. 24	72	5 1/8" to 11"	15°	Polished	Chrome-Plated Steel	Plastic Roll-Up Pouch	4950A69	0000000
		14	6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	No. 6, No. 7, No. 8, No. 9, No. 10, No. 11, No. 12, No. 13, No. 14, No. 15, No. 16, No. 17, No. 18, No. 19	72	4 15/16" to 11 1/16"	15°	Polished	Chrome-Plated Steel	Plastic Roll-Up Pouch	4950A79	000000

Stubby Ratcheting Combination Wrenches

12-Point

Opening

Turn nuts and bolts in tight spaces without removing and repositioning these wrenches. They’re up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. When you need more leverage, opt for standard-length ratcheting wrenches.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

			Box End		Open End
	Drive Size	Overall Lg.	Head Thick.	Number of Teeth	Opening Angle	Head Thick.	Appearance		Each
12-Point Opening





				Chrome-Plated Steel
				3/8"	3 7/8"	5/16"	80	15°	3/16"	Polished	5666A12	000000
				7/16"	4"	11/32"	80	15°	7/32"	Polished	5666A13	00000
				1/2"	4 3/8"	13/32"	80	15°	7/32"	Polished	5666A14	00000
				9/16"	4 1/2"	13/32"	80	15°	1/4"	Polished	5666A15	00000
				5/8"	4 7/8"	7/16"	80	15°	9/32"	Polished	5666A16	00000
				11/16"	5"	15/32"	80	15°	1/2"	Polished	5666A17	00000
				3/4"	5 3/8"	1/2"	80	15°	11/32"	Polished	5666A18	00000
				10 mm	3 1/2"	21/64"	80	15°	3/16"	Polished	5666A31	00000
				11 mm	4"	11/32"	80	15°	13/64"	Polished	5666A32	00000
				12 mm	4 1/8"	23/64"	80	15°	7/32"	Polished	5666A33	00000
				13 mm	4 3/8"	13/32"	80	15°	7/32"	Polished	5666A34	00000
				14 mm	4 1/2"	13/32"	80	15°	1/4"	Polished	5666A35	00000
				15 mm	4 5/8"	7/16"	80	15°	3/16"	Polished	5666A36	00000
				16 mm	4 7/8"	7/16"	80	15°	9/32"	Polished	5666A37	00000
				17 mm	5"	15/32"	80	15°	19/64"	Polished	5666A38	00000
				18 mm	5 1/4"	15/32"	80	15°	5/16"	Polished	5666A39	00000
				19 mm	5 3/8"	1/2"	80	15°	21/64"	Polished	5666A41	00000

Stubby Reversible Ratcheting Combination Wrench Sets

12-Point

Opening

The ultimate tool for ratcheting in tight spaces—in an array of sizes. They’re up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. With the flick of a lever, these wrenches go from loosening nuts and bolts to tightening them.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

			Box End
	Drive Size	Overall Lg.	Head Offset Angle	Number of Teeth	Open-End Opening Angle	Appearance		Each
12-Point Opening





				Chrome-Plated Steel
				5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	3 1/2" to 5 1/2"	15°	60	15°	Polished	5666A4	0000000
				8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	3 1/2" to 5 1/2"	15°	60	15°	Polished	5666A29	000000

Stubby Combination Wrench Sets


Fabric Roll-Up Pouch	Plastic Roll-Up Pouch


		12-Point Opening

Turn nuts and bolts in tight spaces with the wrenches in these sets. They are up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. However, you may need longer wrenches for higher-leverage jobs.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

	Box-End Head Offset Angle	Open-End Opening Angle	Appearance	Container Type	Specs. Met		Each
12-Point Opening





	Chrome-Plated Steel
	7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	3 3/4" to 5 7/16"	15°	15°	Polished	Fabric Roll-Up Pouch	—	5304A21	0000000
	7	7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm	3 3/8" to 4 5/16"	15°	15°	Polished	Fabric Roll-Up Pouch	—	5314A24	000000
	11	1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	3 1/4" to 5 1/2"	15°	15°	Polished	Plastic Roll-Up Pouch	—	5443A44	000000
	14	6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	3 1/4" to 5 1/2"	15°	15°	Polished	Plastic Roll-Up Pouch	ASME B107.100	55715A41	000000

Stubby Ratcheting Combination Wrench Sets

Fabric Roll-Up Pouch


	12-Point Opening

Turn nuts and bolts in tight spaces without removing and repositioning the wrenches in these sets. They’re up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. When you need more leverage, opt for standard-length ratcheting wrenches.

Standard—Made in the U.S. from high-strength steel or stainless steel, these wrenches are built to last. They’re indispensable for daily maintenance and repair.

Economy—Fill out your tool kit for a few dollars per wrench. Typically imported, these cost-friendly sets are the right choice for occasional maintenance.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

	No. of Teeth	Open-End Opening Angle	Appearance	Material	Container Type	Specs. Met		Each
Standard





	12-Point Opening
	7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	3 7/8" to 5 3/8"	72	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	5666A65	0000000
	10	10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	3 1/2" to 5 3/8"	72	15°	Polished	Chrome-Plated Steel	Fabric Roll-Up Pouch	—	5666A67	000000

	Economy





					12-Point Opening
					7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	3 3/4" to 5 1/2"	72	15°	Polished	Chrome-Plated Steel	—	—	4363A11	000000
					10	10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm	3 3/4" to 5 1/2"	72	15°	Polished	Chrome-Plated Steel	—	ASME B107.100	4363A12	000000

Nonsparking Combination Wrench Sets

12-Point

Opening

Made of aluminum bronze that is FM approved, these wrench sets won't create sparks even when scraped, struck, or dropped. They help you meet OSHA requirements when turning nuts and bolts in hazardous environments with flammable vapors, liquids, or dust. Use them everywhere from oil refineries to chemicals plants.

Warning: Do not use these tools in direct contact with acetylene.

	Drive Size	Overall Lg.	Box-End Head Offset Angle	Open-End Opening Angle	Material	Container Type	Certification		Each
12-Point Opening


	6	7/16", 1/2", 9/16", 5/8", 3/4", 1 1/8"	6 7/8" to 15 3/8"	15°	15°	Aluminum Bronze	Fabric Roll-Up Pouch	FM Approved	6506A41	0000000
	7	3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8"	6 1/4" to 11 5/8"	15°	15°	Aluminum Bronze	Fabric Roll-Up Pouch	FM Approved	6506A42	000000

High-Visibility Combination Wrench Sets


Plastic Roll-Up Pouch Red	Plastic Roll-Up Pouch Yellow

12-Point

Opening

These eye-catching wrenches stand out in tool kit clutter and under faint lighting on construction sites. Powder coated in bright red or yellow, these wrenches are easy to spot when you need them in a pinch.

	Drive Size	Overall Lg.	Box-End Head Offset Angle	Open-End Opening Angle	Material	Container Type	Color		Each
12-Point Opening


	7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	6 1/2" to 11"	15°	15°	Powder-Coated Steel	Plastic Roll-Up Pouch	Red	5813A11	0000000
	7	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"	6 1/2" to 11"	15°	15°	Powder-Coated Steel	Plastic Roll-Up Pouch	Yellow	5813A13	000000
	11	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"	6 1/2" to 14"	15°	15°	Powder-Coated Steel	Plastic Roll-Up Pouch	Red	5813A21	000000
	11	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"	6 1/2" to 14"	15°	15°	Powder-Coated Steel	Plastic Roll-Up Pouch	Yellow	5813A23	000000
	14	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4"	6 1/2" to 17"	15°	15°	Powder-Coated Steel	Plastic Roll-Up Pouch	Red	5813A31	000000
	14	3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4"	6 1/2" to 17"	15°	15°	Powder-Coated Steel	Plastic Roll-Up Pouch	Yellow	5813A33	000000