Get dry compressed air in high-pressure systems—these dryers have a maximum pressure rating of 300 psi. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line. Install after an oil filter to protect the desiccant. They have a sight glass so you can see inside the bowl to monitor contents.

Desiccant (sold separately) is required to remove moisture from air. To reuse saturated desiccant, heat it at its reactivation temperature until it returns to its dry color.

These dryer/filters have a clay desiccant that removes moisture, oil, and particles, so there’s no need to install a separate filter and dryer. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line. Dryer/filters have a clear bowl or sight glass that allow you to see inside to monitor the contents. When the desiccant becomes saturated, it changes color to indicate that it should be replaced.

Dryer/filters with an aluminum bowl stand up to synthetic compressor lubricants and solvents better than dyers with an acrylic plastic bowl can.

Dryer/filters with a polyurethane bowl have excellent resistance to synthetic compressor lubricants, solvents, acids, and other chemicals.

Remove bulk water vapor from your compressed air line by refrigerating the air. These dryers have a timer-activated drain valve that opens automatically to discharge condensate. Install them in your air line after the compressor and separator.

Non-cycling dryers run continuously to dry compressed air, so they’re best for applications with a constant need for dry air.

These all-in-one dryers with filters eliminate the need for individual dryers and filters. They cool air through refrigeration to condense water vapor for removal. Because they are non-cycling and run continuously, they are best for applications that need constant dry air. A float-operated drain valve opens automatically when the bowl begins to fill. After water removal, a heat exchanger raises the outlet air temperature to prevent condensation on downstream piping. The built-in display lets you monitor and adjust the dew point of the compressed air. Be sure to install in your air line after the compressor and separator.

Prevent equipment damage caused by moisture. The first step in water removal, these separators remove the water that accumulates as compressed air cools. They have a float-operated drain valve that automatically opens when the bowl begins to fill. Install in your air line after compressors and aftercoolers.

Separators with a sight glass allow you to see inside the bowl to monitor its contents.

Separators with feet can be placed on the floor or suspended from piping without support.