A filter and regulator joined top-to-bottom, these filter/regulators supply clean, compressed air at the pressure you need. They connect to other Parker units of the same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—so you can customize your air preparation system. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure. Add a safety lockout valve to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying. Bowls with a semi-automatic drain release their condensate whenever your system is depressurized. You can also empty the drain manually.

Joiner clamps (sold separately) create compact, airtight connections between components. All include a wall-mounting bracket, except for clamps in the PY3 series.

Mounting brackets (sold separately) let you attach the filter/regulator to a wall or equipment.

Connect these filter/regulators to other Aventics units of the same series with joiner clamps (sold separately) to customize your air preparation system. A filter and regulator joined top-to-bottom, they provide clean, compressed air at the pressure you need. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure. Add a safety lockout valve to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Bowls with a semi-automatic drain release their condensate whenever your system is depressurized. You can also empty the drain manually.

Joiner clamps (sold separately) create compact, airtight connections between components, even if the pipe sizes are slightly different. They come with mounting brackets to attach the filter/regulator to a wall or equipment.

Mounting brackets (sold separately) allow you to attach the filter/regulator to a wall or equipment.

A filter and regulator combined into a single unit, these filter/regulators provide clean, compressed air at the pressure you need. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure.

Stacked filter/regulators are joined top-to-bottom, so they take up less horizontal space than inline filter/regulators. Inline filter/regulators are connected side-to-side, so each part can be replaced or repaired on its own. They help you reduce maintenance costs.

Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Filter/regulators with a mounting bracket can be attached to a wall or equipment.

A filter and regulator joined top-to-bottom, these filter/regulators provide clean, compressed air at the pressure you need. They connect to other Festo units of these same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—so you can customize your air preparation system. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure.

Slip a padlock through a hole in the knob to prevent unwanted pressure changes. Add a safety lockout valve to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.

A filter and regulator stacked together, these filter/regulators clean your compressed air and maintain the pressure. They connect to other ARO units of the same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—so you can customize your air preparation system. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure. Add a safety lockout valve to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets to attach the filter/regulator to a wall or equipment.

End block sets (sold separately) allow you to swap out components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.

Knob-locking clips (sold separately) fit between the knob and the body of these filter/regulators, preventing unwanted pressure adjustments. To make changes, remove the knob and clip, then reattach the knob.

Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags. The filter and regulator are joined top-to-bottom to fit in the same space as a filter alone. They provide clean compressed air at your required pressure. The filter has a clear bowl, so you can see inside to monitor contents from every direction. The regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure. Run a tube from the open drain port to a disposal point, such as a drain pan or waste system.