A filter and regulator stacked top-to-bottom, these filter/regulators supply clean, compressed air at the pressure you need. They connect to other Wilkerson units of the same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—so you can customize your air preparation system. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure. Add a safety lockout valve to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Aluminum bowls are stronger than plastic bowls, so they won't crack or shatter if dropped.

Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Joiner clamps (sold separately) create compact, airtight connections between components. They come with mounting brackets.

End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.

Mounting brackets (sold separately) allow you to attach the filter/regulator to a wall or equipment.

Fit a nonrelieving diaphragm assembly (sold separately) onto these regulators to stop them from exhausting excess downstream pressure. They’re helpful if you’re using a gas you don’t want automatically released into the air, such as an expensive noble gas.