About Air Preparation
More
Parker Compressed Air Filter Elements for Oil Removal
Also known as coalescing filters, these filter elements fit into Parker modular compressed air filters to remove oil and fine particles. Check the manufacturer series on your filter to ensure compatibility.
Elements that remove oil filter out liquid oil. Those that remove particles down to .01 microns provide the high filtration necessary to protect sensitive equipment. They’re often used for paint spraying or electronics manufacturing.
| For Manufacturer Series | Removes Oil Content Down To, ppm | Removes Particle Size Down To, microns | Each | |
For Removing Oil, Particles | ||||
|---|---|---|---|---|
| 12F | 0.3 | 0.01 | 0000000 | 000000 |
Parker Modular Compressed Air Filters for Oil Removal
Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment. They connect to other Parker units of the same series—even if the pipe sizes are slightly different—so you can customize your air preparation system. Their clamps (sold separately) create compact, airtight connections that are easy to swap out. To prevent clogs, install a particle filter before the oil filter.
Filters with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.
Filters with a service indicator make it easy to know when it’s time for a filter element replacement. When the indicator at the top of the unit turns red, the filter element is ready to be replaced.
Use joiner clamps to connect the filter to another Parker modular unit with the same series number. These clamps come with mounting brackets, except for series P3Y.
When using series 11 and series 12 filters with their compatible components, your maximum flow rate will be the lower of the two components. Series 12 filters are compatible with Parker compressed air components from series 07.
Filters | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Replacement Filter Elements | Replacement Filter Bowls | Joiner Clamps | |||||||||||||||
| Mfr. Series | Compatible With Mfr. Series | Pipe Size  | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Removes Oil Content Down To, ppm | Filter Service Indicator Included | Housing Material | Ht. | Wd. | Each | Each | Each | Each | ||||
Polycarbonate Plastic Bowl—Clear with Automatic Drain | ||||||||||||||||||
| 12F | 07 | 1/2 | 75 scfm @ 90 psi | 150 | 0.01 | 0.3 | Yes | Zinc | 8 5/8" | 3 1/4" | 0000000 | 0000000 | 0000000 | 000000 | 0000000 | 0000000 | 000000 | 000000 |
| 12F | 07 | 3/4 | 80 scfm @ 90 psi | 150 | 0.01 | 0.3 | Yes | Zinc | 8 5/8" | 3 1/4" | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 | 000000 | 00000 |
Parker Compressed Air Filter Bowls
Replace a damaged bowl or change the bowl material or drain type on your Parker modular compressed air filter. These bowls come with an O-ring to ensure a tight seal. Check the manufacturer series on your filter to ensure compatibility.
Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.
Clear bowls and opaque bowls with sight glass allow you to see inside to monitor their contents.
Bowl | |||||
|---|---|---|---|---|---|
| For Manufacturer Series | Material | Type | O-Ring Material | Each | |
Automatic Drain | |||||
| 07E, 07F, 12E, 12F | Polycarbonate Plastic | Clear | Buna-N Rubber | 0000000 | 0000000 |