About Air Preparation
More
SMC Modular Compressed Air Filters for Particle Removal
Extend the life of air-powered tools and equipment by removing particles and water droplets from compressed air. Connect these filters to other SMC units in the same series with joiner clamps (sold separately) to customize your air preparation system. You’ll only need 25 mm of clearance below the filter for emptying condensate or switching out the filter element. The filter element isn’t attached to the housing, so it comes off when the bowl does.
Joiner clamps (sold separately) create compact, airtight connections between components, even if the pipe sizes are slightly different. They come with mounting brackets to attach the filter to a wall or equipment.
Filters | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread | O'all | Replacement Filter Bowls | Replacement Filter Seals | Joiner Clamps | ||||||||||||
| Mfr. Series | Size | Pitch, mm | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Filter Service Indicator Included | Ht. | Wd. | Each | Each | Each | Each | ||||
Polycarbonate Plastic Bowl—Clear with Manual Drain | ||||||||||||||||
| AF10-A | M5 | 0.8 | 5.3 scfm @ 100 psi | 145 | 5 | No | 2 5/8" | 1" | 6098K2 | 000000 | 3059N17 | 00000 | 3061N21 | 00000 | 8550T21 | 00000 |
SMC Compressed Air Filter Elements for Particle Removal
Replace the filter element in your SMC modular compressed air filter to trap solid particles and water droplets as small as 5 microns. Check the manufacturer series on your filter to ensure compatibility.
| For Manufacturer Series | Removes Particle Size Down To, microns | Each | |
| AF10-A, AW10-B | 5 | 6098K6 | 00000 |
SMC Compressed Air Filter Bowls
Replace a damaged bowl on your SMC modular compressed air filter, or switch to a different bowl material or drain type. These bowls come with an O-ring to ensure a tight seal.
Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.
BSPP threads are also known as G threads. BSPT threads are also known as R threads.
Bowl | |||||||
|---|---|---|---|---|---|---|---|
| For Manufacturer Series | For Inlet Thread Type | Material | Type | Guard Material | O-Ring Material | Each | |
Automatic Drain | |||||||
For Series No. 10 | |||||||
| AF10-A, AW10-A | Metric | Polycarbonate Plastic | Clear | Polycarbonate Plastic | Buna-N Rubber | 3059N47 | 000000 |
Manual Drain | |||||||
For Series No. 10 | |||||||
| AF10-A, AW10-A | BSPP, BSPT, NPT | Polycarbonate Plastic | Clear | __ | Buna-N Rubber | 3059N17 | 0000 |